[ Avaa Bypassed ]




Upload:

Command:

hmhc3928@3.142.98.186: ~ $
/*
 * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * See the COPYRIGHT file distributed with this work for additional
 * information regarding copyright ownership.
 */

#ifndef ISC_MEM_H
#define ISC_MEM_H 1

/*! \file isc/mem.h */

#include <stdio.h>

#include <isc/json.h>
#include <isc/lang.h>
#include <isc/mutex.h>
#include <isc/platform.h>
#include <isc/types.h>
#include <isc/xml.h>

ISC_LANG_BEGINDECLS

#define ISC_MEM_LOWATER 0
#define ISC_MEM_HIWATER 1
typedef void (*isc_mem_water_t)(void *, int);

typedef void * (*isc_memalloc_t)(void *, size_t);
typedef void (*isc_memfree_t)(void *, void *);

/*%
 * Define ISC_MEM_TRACKLINES=1 to turn on detailed tracing of memory
 * allocation and freeing by file and line number.
 */
#ifndef ISC_MEM_TRACKLINES
#define ISC_MEM_TRACKLINES 1
#endif

/*%
 * Define ISC_MEM_CHECKOVERRUN=1 to turn on checks for using memory outside
 * the requested space.  This will increase the size of each allocation.
 *
 * If we are performing a Coverity static analysis then ISC_MEM_CHECKOVERRUN
 * can hide bugs that would otherwise discovered so force to zero.
 */
#ifdef __COVERITY__
#undef ISC_MEM_CHECKOVERRUN
#define ISC_MEM_CHECKOVERRUN 0
#endif
#ifndef ISC_MEM_CHECKOVERRUN
#define ISC_MEM_CHECKOVERRUN 1
#endif

/*%
 * Define ISC_MEM_FILL=1 to fill each block of memory returned to the system
 * with the byte string '0xbe'.  This helps track down uninitialized pointers
 * and the like.  On freeing memory, the space is filled with '0xde' for
 * the same reasons.
 *
 * If we are performing a Coverity static analysis then ISC_MEM_FILL
 * can hide bugs that would otherwise discovered so force to zero.
 */
#ifdef __COVERITY__
#undef ISC_MEM_FILL
#define ISC_MEM_FILL 0
#endif
#ifndef ISC_MEM_FILL
#define ISC_MEM_FILL 1
#endif

/*%
 * Define ISC_MEMPOOL_NAMES=1 to make memory pools store a symbolic
 * name so that the leaking pool can be more readily identified in
 * case of a memory leak.
 */
#ifndef ISC_MEMPOOL_NAMES
#define ISC_MEMPOOL_NAMES 1
#endif

LIBISC_EXTERNAL_DATA extern unsigned int isc_mem_debugging;
LIBISC_EXTERNAL_DATA extern unsigned int isc_mem_defaultflags;

/*@{*/
#define ISC_MEM_DEBUGTRACE		0x00000001U
#define ISC_MEM_DEBUGRECORD		0x00000002U
#define ISC_MEM_DEBUGUSAGE		0x00000004U
#define ISC_MEM_DEBUGSIZE		0x00000008U
#define ISC_MEM_DEBUGCTX		0x00000010U
#define ISC_MEM_DEBUGALL		0x0000001FU
/*!<
 * The variable isc_mem_debugging holds a set of flags for
 * turning certain memory debugging options on or off at
 * runtime.  It is initialized to the value ISC_MEM_DEGBUGGING,
 * which is 0 by default but may be overridden at compile time.
 * The following flags can be specified:
 *
 * \li #ISC_MEM_DEBUGTRACE
 *	Log each allocation and free to isc_lctx.
 *
 * \li #ISC_MEM_DEBUGRECORD
 *	Remember each allocation, and match them up on free.
 *	Crash if a free doesn't match an allocation.
 *
 * \li #ISC_MEM_DEBUGUSAGE
 *	If a hi_water mark is set, print the maximum inuse memory
 *	every time it is raised once it exceeds the hi_water mark.
 *
 * \li #ISC_MEM_DEBUGSIZE
 *	Check the size argument being passed to isc_mem_put() matches
 *	that passed to isc_mem_get().
 *
 * \li #ISC_MEM_DEBUGCTX
 *	Check the mctx argument being passed to isc_mem_put() matches
 *	that passed to isc_mem_get().
 */
/*@}*/

#if ISC_MEM_TRACKLINES
#define _ISC_MEM_FILELINE	, __FILE__, __LINE__
#define _ISC_MEM_FLARG		, const char *, unsigned int
#else
#define _ISC_MEM_FILELINE
#define _ISC_MEM_FLARG
#endif

/*!
 * Define ISC_MEM_USE_INTERNAL_MALLOC=1 to use the internal malloc()
 * implementation in preference to the system one.  The internal malloc()
 * is very space-efficient, and quite fast on uniprocessor systems.  It
 * performs poorly on multiprocessor machines.
 * JT: we can overcome the performance issue on multiprocessor machines
 * by carefully separating memory contexts.
 */

#ifndef ISC_MEM_USE_INTERNAL_MALLOC
#define ISC_MEM_USE_INTERNAL_MALLOC 1
#endif

/*
 * Flags for isc_mem_create2()calls.
 */
#define ISC_MEMFLAG_NOLOCK	0x00000001	 /* no lock is necessary */
#define ISC_MEMFLAG_INTERNAL	0x00000002	 /* use internal malloc */
#if ISC_MEM_USE_INTERNAL_MALLOC
#define ISC_MEMFLAG_DEFAULT 	ISC_MEMFLAG_INTERNAL
#else
#define ISC_MEMFLAG_DEFAULT 	0
#endif


/*%<
 * We use either isc___mem (three underscores) or isc__mem (two) depending on
 * whether it's for BIND9's internal purpose (with -DBIND9) or generic export
 * library.
 */
#define ISCMEMFUNC(sfx) isc__mem_ ## sfx
#define ISCMEMPOOLFUNC(sfx) isc__mempool_ ## sfx

#define isc_mem_get(c, s)	ISCMEMFUNC(get)((c), (s) _ISC_MEM_FILELINE)
#define isc_mem_allocate(c, s)	ISCMEMFUNC(allocate)((c), (s) _ISC_MEM_FILELINE)
#define isc_mem_reallocate(c, p, s) ISCMEMFUNC(reallocate)((c), (p), (s) _ISC_MEM_FILELINE)
#define isc_mem_strdup(c, p)	ISCMEMFUNC(strdup)((c), (p) _ISC_MEM_FILELINE)
#define isc_mempool_get(c)	ISCMEMPOOLFUNC(get)((c) _ISC_MEM_FILELINE)

/*%
 * isc_mem_putanddetach() is a convenience function for use where you
 * have a structure with an attached memory context.
 *
 * Given:
 *
 * \code
 * struct {
 *	...
 *	isc_mem_t *mctx;
 *	...
 * } *ptr;
 *
 * isc_mem_t *mctx;
 *
 * isc_mem_putanddetach(&ptr->mctx, ptr, sizeof(*ptr));
 * \endcode
 *
 * is the equivalent of:
 *
 * \code
 * mctx = NULL;
 * isc_mem_attach(ptr->mctx, &mctx);
 * isc_mem_detach(&ptr->mctx);
 * isc_mem_put(mctx, ptr, sizeof(*ptr));
 * isc_mem_detach(&mctx);
 * \endcode
 */

/*% memory and memory pool methods */
typedef struct isc_memmethods {
	void (*attach)(isc_mem_t *source, isc_mem_t **targetp);
	void (*detach)(isc_mem_t **mctxp);
	void (*destroy)(isc_mem_t **mctxp);
	void *(*memget)(isc_mem_t *mctx, size_t size _ISC_MEM_FLARG);
	void (*memput)(isc_mem_t *mctx, void *ptr, size_t size _ISC_MEM_FLARG);
	void (*memputanddetach)(isc_mem_t **mctxp, void *ptr,
				size_t size _ISC_MEM_FLARG);
	void *(*memallocate)(isc_mem_t *mctx, size_t size _ISC_MEM_FLARG);
	void *(*memreallocate)(isc_mem_t *mctx, void *ptr,
			       size_t size _ISC_MEM_FLARG);
	char *(*memstrdup)(isc_mem_t *mctx, const char *s _ISC_MEM_FLARG);
	void (*memfree)(isc_mem_t *mctx, void *ptr _ISC_MEM_FLARG);
	void (*setdestroycheck)(isc_mem_t *mctx, isc_boolean_t flag);
	void (*setwater)(isc_mem_t *ctx, isc_mem_water_t water,
			 void *water_arg, size_t hiwater, size_t lowater);
	void (*waterack)(isc_mem_t *ctx, int flag);
	size_t (*inuse)(isc_mem_t *mctx);
	size_t (*maxinuse)(isc_mem_t *mctx);
	size_t (*total)(isc_mem_t *mctx);
	isc_boolean_t (*isovermem)(isc_mem_t *mctx);
	isc_result_t (*mpcreate)(isc_mem_t *mctx, size_t size,
				 isc_mempool_t **mpctxp);
} isc_memmethods_t;

typedef struct isc_mempoolmethods {
	void (*destroy)(isc_mempool_t **mpctxp);
	void *(*get)(isc_mempool_t *mpctx _ISC_MEM_FLARG);
	void (*put)(isc_mempool_t *mpctx, void *mem _ISC_MEM_FLARG);
	unsigned int (*getallocated)(isc_mempool_t *mpctx);
	void (*setmaxalloc)(isc_mempool_t *mpctx, unsigned int limit);
	void (*setfreemax)(isc_mempool_t *mpctx, unsigned int limit);
	void (*setname)(isc_mempool_t *mpctx, const char *name);
	void (*associatelock)(isc_mempool_t *mpctx, isc_mutex_t *lock);
	void (*setfillcount)(isc_mempool_t *mpctx, unsigned int limit);
} isc_mempoolmethods_t;

/*%
 * This structure is actually just the common prefix of a memory context
 * implementation's version of an isc_mem_t.
 * \brief
 * Direct use of this structure by clients is forbidden.  mctx implementations
 * may change the structure.  'magic' must be ISCAPI_MCTX_MAGIC for any of the
 * isc_mem_ routines to work.  mctx implementations must maintain all mctx
 * invariants.
 */
struct isc_mem {
	unsigned int		impmagic;
	unsigned int		magic;
	isc_memmethods_t	*methods;
};

#define ISCAPI_MCTX_MAGIC	ISC_MAGIC('A','m','c','x')
#define ISCAPI_MCTX_VALID(m)	((m) != NULL && \
				 (m)->magic == ISCAPI_MCTX_MAGIC)

/*%
 * This is the common prefix of a memory pool context.  The same note as
 * that for the mem structure applies.
 */
struct isc_mempool {
	unsigned int		impmagic;
	unsigned int		magic;
	isc_mempoolmethods_t	*methods;
};

#define ISCAPI_MPOOL_MAGIC	ISC_MAGIC('A','m','p','l')
#define ISCAPI_MPOOL_VALID(mp)	((mp) != NULL && \
				 (mp)->magic == ISCAPI_MPOOL_MAGIC)

#define isc_mem_put(c, p, s) \
	do { \
		ISCMEMFUNC(put)((c), (p), (s) _ISC_MEM_FILELINE);	\
		(p) = NULL; \
	} while (0)
#define isc_mem_putanddetach(c, p, s) \
	do { \
		ISCMEMFUNC(putanddetach)((c), (p), (s) _ISC_MEM_FILELINE); \
		(p) = NULL; \
	} while (0)
#define isc_mem_free(c, p) \
	do { \
		ISCMEMFUNC(free)((c), (p) _ISC_MEM_FILELINE);	\
		(p) = NULL; \
	} while (0)
#define isc_mempool_put(c, p) \
	do { \
		ISCMEMPOOLFUNC(put)((c), (p) _ISC_MEM_FILELINE);	\
		(p) = NULL; \
	} while (0)

/*@{*/
isc_result_t
isc_mem_create(size_t max_size, size_t target_size,
	       isc_mem_t **mctxp);

isc_result_t
isc_mem_create2(size_t max_size, size_t target_size,
		isc_mem_t **mctxp, unsigned int flags);

isc_result_t
isc_mem_createx(size_t max_size, size_t target_size,
		isc_memalloc_t memalloc, isc_memfree_t memfree,
		void *arg, isc_mem_t **mctxp);

isc_result_t
isc_mem_createx2(size_t max_size, size_t target_size,
		 isc_memalloc_t memalloc, isc_memfree_t memfree,
		 void *arg, isc_mem_t **mctxp, unsigned int flags);

/*!<
 * \brief Create a memory context.
 *
 * 'max_size' and 'target_size' are tuning parameters.  When
 * ISC_MEMFLAG_INTERNAL is set, allocations smaller than 'max_size'
 * will be satisfied by getting blocks of size 'target_size' from the
 * system allocator and breaking them up into pieces; larger allocations
 * will use the system allocator directly. If 'max_size' and/or
 * 'target_size' are zero, default values will be * used.  When
 * ISC_MEMFLAG_INTERNAL is not set, 'target_size' is ignored.
 *
 * 'max_size' is also used to size the statistics arrays and the array
 * used to record active memory when ISC_MEM_DEBUGRECORD is set.  Setting
 * 'max_size' too low can have detrimental effects on performance.
 *
 * A memory context created using isc_mem_createx() will obtain
 * memory from the system by calling 'memalloc' and 'memfree',
 * passing them the argument 'arg'.  A memory context created
 * using isc_mem_create() will use the standard library malloc()
 * and free().
 *
 * If ISC_MEMFLAG_NOLOCK is set in 'flags', the corresponding memory context
 * will be accessed without locking.  The user who creates the context must
 * ensure there be no race.  Since this can be a source of bug, it is generally
 * inadvisable to use this flag unless the user is very sure about the race
 * condition and the access to the object is highly performance sensitive.
 *
 * Requires:
 * mctxp != NULL && *mctxp == NULL */
/*@}*/

/*@{*/
void
isc_mem_attach(isc_mem_t *, isc_mem_t **);
void
isc_mem_detach(isc_mem_t **);
/*!<
 * \brief Attach to / detach from a memory context.
 *
 * This is intended for applications that use multiple memory contexts
 * in such a way that it is not obvious when the last allocations from
 * a given context has been freed and destroying the context is safe.
 *
 * Most applications do not need to call these functions as they can
 * simply create a single memory context at the beginning of main()
 * and destroy it at the end of main(), thereby guaranteeing that it
 * is not destroyed while there are outstanding allocations.
 */
/*@}*/

void
isc_mem_destroy(isc_mem_t **);
/*%<
 * Destroy a memory context.
 */

isc_result_t
isc_mem_ondestroy(isc_mem_t *ctx,
		  isc_task_t *task,
		  isc_event_t **event);
/*%<
 * Request to be notified with an event when a memory context has
 * been successfully destroyed.
 */

void
isc_mem_stats(isc_mem_t *mctx, FILE *out);
/*%<
 * Print memory usage statistics for 'mctx' on the stream 'out'.
 */

void
isc_mem_setdestroycheck(isc_mem_t *mctx,
			isc_boolean_t on);
/*%<
 * If 'on' is ISC_TRUE, 'mctx' will check for memory leaks when
 * destroyed and abort the program if any are present.
 */

/*@{*/
void
isc_mem_setquota(isc_mem_t *, size_t);
size_t
isc_mem_getquota(isc_mem_t *);
/*%<
 * Set/get the memory quota of 'mctx'.  This is a hard limit
 * on the amount of memory that may be allocated from mctx;
 * if it is exceeded, allocations will fail.
 */
/*@}*/

size_t
isc_mem_inuse(isc_mem_t *mctx);
/*%<
 * Get an estimate of the amount of memory in use in 'mctx', in bytes.
 * This includes quantization overhead, but does not include memory
 * allocated from the system but not yet used.
 */

size_t
isc_mem_maxinuse(isc_mem_t *mctx);
/*%<
 * Get an estimate of the largest amount of memory that has been in
 * use in 'mctx' at any time.
 */

size_t
isc_mem_total(isc_mem_t *mctx);
/*%<
 * Get the total amount of memory in 'mctx', in bytes, including memory
 * not yet used.
 */

isc_boolean_t
isc_mem_isovermem(isc_mem_t *mctx);
/*%<
 * Return true iff the memory context is in "over memory" state, i.e.,
 * a hiwater mark has been set and the used amount of memory has exceeds
 * the mark.
 */

void
isc_mem_setwater(isc_mem_t *mctx, isc_mem_water_t water, void *water_arg,
		 size_t hiwater, size_t lowater);
/*%<
 * Set high and low water marks for this memory context.
 *
 * When the memory usage of 'mctx' exceeds 'hiwater',
 * '(water)(water_arg, #ISC_MEM_HIWATER)' will be called.  'water' needs to
 * call isc_mem_waterack() with #ISC_MEM_HIWATER to acknowledge the state
 * change.  'water' may be called multiple times.
 *
 * When the usage drops below 'lowater', 'water' will again be called, this
 * time with #ISC_MEM_LOWATER.  'water' need to calls isc_mem_waterack() with
 * #ISC_MEM_LOWATER to acknowledge the change.
 *
 *	static void
 *	water(void *arg, int mark) {
 *		struct foo *foo = arg;
 *
 *		LOCK(&foo->marklock);
 *		if (foo->mark != mark) {
 * 			foo->mark = mark;
 *			....
 *			isc_mem_waterack(foo->mctx, mark);
 *		}
 *		UNLOCK(&foo->marklock);
 *	}
 *
 * If 'water' is NULL then 'water_arg', 'hi_water' and 'lo_water' are
 * ignored and the state is reset.
 *
 * Requires:
 *
 *	'water' is not NULL.
 *	hi_water >= lo_water
 */

void
isc_mem_waterack(isc_mem_t *ctx, int mark);
/*%<
 * Called to acknowledge changes in signaled by calls to 'water'.
 */

void
isc_mem_printactive(isc_mem_t *mctx, FILE *file);
/*%<
 * Print to 'file' all active memory in 'mctx'.
 *
 * Requires ISC_MEM_DEBUGRECORD to have been set.
 */

void
isc_mem_printallactive(FILE *file);
/*%<
 * Print to 'file' all active memory in all contexts.
 *
 * Requires ISC_MEM_DEBUGRECORD to have been set.
 */

void
isc_mem_checkdestroyed(FILE *file);
/*%<
 * Check that all memory contexts have been destroyed.
 * Prints out those that have not been.
 * Fatally fails if there are still active contexts.
 */

unsigned int
isc_mem_references(isc_mem_t *ctx);
/*%<
 * Return the current reference count.
 */

void
isc_mem_setname(isc_mem_t *ctx, const char *name, void *tag);
/*%<
 * Name 'ctx'.
 *
 * Notes:
 *
 *\li	Only the first 15 characters of 'name' will be copied.
 *
 *\li	'tag' is for debugging purposes only.
 *
 * Requires:
 *
 *\li	'ctx' is a valid ctx.
 */

const char *
isc_mem_getname(isc_mem_t *ctx);
/*%<
 * Get the name of 'ctx', as previously set using isc_mem_setname().
 *
 * Requires:
 *\li	'ctx' is a valid ctx.
 *
 * Returns:
 *\li	A non-NULL pointer to a null-terminated string.
 * 	If the ctx has not been named, the string is
 * 	empty.
 */

void *
isc_mem_gettag(isc_mem_t *ctx);
/*%<
 * Get the tag value for  'task', as previously set using isc_mem_setname().
 *
 * Requires:
 *\li	'ctx' is a valid ctx.
 *
 * Notes:
 *\li	This function is for debugging purposes only.
 *
 * Requires:
 *\li	'ctx' is a valid task.
 */

#ifdef HAVE_LIBXML2
int
isc_mem_renderxml(xmlTextWriterPtr writer);
/*%<
 * Render all contexts' statistics and status in XML for writer.
 */
#endif /* HAVE_LIBXML2 */

#ifdef HAVE_JSON
isc_result_t
isc_mem_renderjson(json_object *memobj);
/*%<
 * Render all contexts' statistics and status in JSON.
 */
#endif /* HAVE_JSON */


/*
 * Memory pools
 */

isc_result_t
isc_mempool_create(isc_mem_t *mctx, size_t size, isc_mempool_t **mpctxp);
/*%<
 * Create a memory pool.
 *
 * Requires:
 *\li	mctx is a valid memory context.
 *\li	size > 0
 *\li	mpctxp != NULL and *mpctxp == NULL
 *
 * Defaults:
 *\li	maxalloc = UINT_MAX
 *\li	freemax = 1
 *\li	fillcount = 1
 *
 * Returns:
 *\li	#ISC_R_NOMEMORY		-- not enough memory to create pool
 *\li	#ISC_R_SUCCESS		-- all is well.
 */

void
isc_mempool_destroy(isc_mempool_t **mpctxp);
/*%<
 * Destroy a memory pool.
 *
 * Requires:
 *\li	mpctxp != NULL && *mpctxp is a valid pool.
 *\li	The pool has no un"put" allocations outstanding
 */

void
isc_mempool_setname(isc_mempool_t *mpctx, const char *name);
/*%<
 * Associate a name with a memory pool.  At most 15 characters may be used.
 *
 * Requires:
 *\li	mpctx is a valid pool.
 *\li	name != NULL;
 */

void
isc_mempool_associatelock(isc_mempool_t *mpctx, isc_mutex_t *lock);
/*%<
 * Associate a lock with this memory pool.
 *
 * This lock is used when getting or putting items using this memory pool,
 * and it is also used to set or get internal state via the isc_mempool_get*()
 * and isc_mempool_set*() set of functions.
 *
 * Multiple pools can each share a single lock.  For instance, if "manager"
 * type object contained pools for various sizes of events, and each of
 * these pools used a common lock.  Note that this lock must NEVER be used
 * by other than mempool routines once it is given to a pool, since that can
 * easily cause double locking.
 *
 * Requires:
 *
 *\li	mpctpx is a valid pool.
 *
 *\li	lock != NULL.
 *
 *\li	No previous lock is assigned to this pool.
 *
 *\li	The lock is initialized before calling this function via the normal
 *	means of doing that.
 */

/*
 * The following functions get/set various parameters.  Note that due to
 * the unlocked nature of pools these are potentially random values unless
 * the imposed externally provided locking protocols are followed.
 *
 * Also note that the quota limits will not always take immediate effect.
 * For instance, setting "maxalloc" to a number smaller than the currently
 * allocated count is permitted.  New allocations will be refused until
 * the count drops below this threshold.
 *
 * All functions require (in addition to other requirements):
 *	mpctx is a valid memory pool
 */

unsigned int
isc_mempool_getfreemax(isc_mempool_t *mpctx);
/*%<
 * Returns the maximum allowed size of the free list.
 */

void
isc_mempool_setfreemax(isc_mempool_t *mpctx, unsigned int limit);
/*%<
 * Sets the maximum allowed size of the free list.
 */

unsigned int
isc_mempool_getfreecount(isc_mempool_t *mpctx);
/*%<
 * Returns current size of the free list.
 */

unsigned int
isc_mempool_getmaxalloc(isc_mempool_t *mpctx);
/*!<
 * Returns the maximum allowed number of allocations.
 */

void
isc_mempool_setmaxalloc(isc_mempool_t *mpctx, unsigned int limit);
/*%<
 * Sets the maximum allowed number of allocations.
 *
 * Additional requirements:
 *\li	limit > 0
 */

unsigned int
isc_mempool_getallocated(isc_mempool_t *mpctx);
/*%<
 * Returns the number of items allocated from this pool.
 */

unsigned int
isc_mempool_getfillcount(isc_mempool_t *mpctx);
/*%<
 * Returns the number of items allocated as a block from the parent memory
 * context when the free list is empty.
 */

void
isc_mempool_setfillcount(isc_mempool_t *mpctx, unsigned int limit);
/*%<
 * Sets the fillcount.
 *
 * Additional requirements:
 *\li	limit > 0
 */


/*
 * Pseudo-private functions for use via macros.  Do not call directly.
 */
void *
ISCMEMFUNC(get)(isc_mem_t *, size_t _ISC_MEM_FLARG);
void
ISCMEMFUNC(putanddetach)(isc_mem_t **, void *, size_t _ISC_MEM_FLARG);
void
ISCMEMFUNC(put)(isc_mem_t *, void *, size_t _ISC_MEM_FLARG);
void *
ISCMEMFUNC(allocate)(isc_mem_t *, size_t _ISC_MEM_FLARG);
void *
ISCMEMFUNC(reallocate)(isc_mem_t *, void *, size_t _ISC_MEM_FLARG);
void
ISCMEMFUNC(free)(isc_mem_t *, void * _ISC_MEM_FLARG);
char *
ISCMEMFUNC(strdup)(isc_mem_t *, const char *_ISC_MEM_FLARG);
void *
ISCMEMPOOLFUNC(get)(isc_mempool_t * _ISC_MEM_FLARG);
void
ISCMEMPOOLFUNC(put)(isc_mempool_t *, void * _ISC_MEM_FLARG);

/*%<
 * See isc_mem_create2() above.
 */
typedef isc_result_t
(*isc_memcreatefunc_t)(size_t init_max_size, size_t target_size,
		       isc_mem_t **ctxp, unsigned int flags);

isc_result_t
isc_mem_register(isc_memcreatefunc_t createfunc);
/*%<
 * Register a new memory management implementation and add it to the list of
 * supported implementations.  This function must be called when a different
 * memory management library is used than the one contained in the ISC library.
 */

isc_result_t
isc__mem_register(void);
/*%<
 * A short cut function that specifies the memory management module in the ISC
 * library for isc_mem_register().  An application that uses the ISC library
 * usually do not have to care about this function: it would call
 * isc_lib_register(), which internally calls this function.
 */

ISC_LANG_ENDDECLS

#endif /* ISC_MEM_H */

Filemanager

Name Type Size Permission Actions
aes.h File 1.05 KB 0644
app.h File 10.23 KB 0644
assertions.h File 2.78 KB 0644
atomic.h File 4.15 KB 0644
backtrace.h File 3.8 KB 0644
base32.h File 3.94 KB 0644
base64.h File 2.39 KB 0644
bind9.h File 849 B 0644
boolean.h File 746 B 0644
buffer.h File 25.69 KB 0644
bufferlist.h File 1.42 KB 0644
commandline.h File 1.69 KB 0644
condition.h File 1.44 KB 0644
counter.h File 1.88 KB 0644
crc64.h File 986 B 0644
deprecated.h File 622 B 0644
dir.h File 1.96 KB 0644
entropy.h File 8.76 KB 0644
errno.h File 658 B 0644
errno2result.h File 893 B 0644
error.h File 1.4 KB 0644
event.h File 2.98 KB 0644
eventclass.h File 1.35 KB 0644
file.h File 11.43 KB 0644
formatcheck.h File 892 B 0644
fsaccess.h File 7.25 KB 0644
hash.h File 7.52 KB 0644
heap.h File 5.14 KB 0644
hex.h File 2.33 KB 0644
hmacmd5.h File 1.75 KB 0644
hmacsha.h File 4.44 KB 0644
ht.h File 4.29 KB 0644
httpd.h File 2.26 KB 0644
int.h File 1.37 KB 0644
interfaceiter.h File 3.03 KB 0644
iterated_hash.h File 1.02 KB 0644
json.h File 1.42 KB 0644
keyboard.h File 976 B 0644
lang.h File 636 B 0644
lex.h File 9.42 KB 0644
lfsr.h File 2.88 KB 0644
lib.h File 1.04 KB 0644
likely.h File 718 B 0644
list.h File 5.65 KB 0644
log.h File 28.06 KB 0644
magic.h File 993 B 0644
md5.h File 2.34 KB 0644
mem.h File 20.63 KB 0644
meminfo.h File 690 B 0644
msgcat.h File 2.66 KB 0644
msgs.h File 8.22 KB 0644
mutex.h File 3.44 KB 0644
mutexblock.h File 1.34 KB 0644
net.h File 10.32 KB 0644
netaddr.h File 4.56 KB 0644
netdb.h File 862 B 0644
netscope.h File 947 B 0644
offset.h File 699 B 0644
once.h File 981 B 0644
ondestroy.h File 2.79 KB 0644
os.h File 670 B 0644
parseint.h File 1.49 KB 0644
platform.h File 9.31 KB 0644
pool.h File 3.42 KB 0644
portset.h File 3.21 KB 0644
print.h File 2.49 KB 0644
queue.h File 4.66 KB 0644
quota.h File 2.29 KB 0644
radix.h File 6.37 KB 0644
random.h File 2.99 KB 0644
ratelimiter.h File 3.38 KB 0644
refcount.h File 7.89 KB 0644
regex.h File 766 B 0644
region.h File 1.99 KB 0644
resource.h File 2.8 KB 0644
result.h File 4.62 KB 0644
resultclass.h File 1.56 KB 0644
rwlock.h File 3.6 KB 0644
safe.h File 1.21 KB 0644
serial.h File 1.4 KB 0644
sha1.h File 1.52 KB 0644
sha2.h File 5.65 KB 0644
sockaddr.h File 6 KB 0644
socket.h File 35.81 KB 0644
stat.h File 805 B 0644
stats.h File 3.02 KB 0644
stdio.h File 1.74 KB 0644
stdlib.h File 703 B 0644
stdtime.h File 1.3 KB 0644
strerror.h File 776 B 0644
string.h File 5.94 KB 0644
symtab.h File 4.21 KB 0644
syslog.h File 843 B 0644
task.h File 21.08 KB 0644
taskpool.h File 3.61 KB 0644
thread.h File 1.47 KB 0644
time.h File 8.66 KB 0644
timer.h File 10.54 KB 0644
tm.h File 894 B 0644
types.h File 5.54 KB 0644
util.h File 7.49 KB 0644
version.h File 688 B 0644
xml.h File 1.07 KB 0644