[ Avaa Bypassed ]




Upload:

Command:

hmhc3928@13.58.73.59: ~ $
/*
 * Copyright (c) 1991, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)queue.h	8.5 (Berkeley) 8/20/94
 */

#ifndef	_SYS_QUEUE_H_
#define	_SYS_QUEUE_H_

/*
 * This file defines five types of data structures: singly-linked lists,
 * lists, simple queues, tail queues, and circular queues.
 *
 * A singly-linked list is headed by a single forward pointer. The
 * elements are singly linked for minimum space and pointer manipulation
 * overhead at the expense of O(n) removal for arbitrary elements. New
 * elements can be added to the list after an existing element or at the
 * head of the list.  Elements being removed from the head of the list
 * should use the explicit macro for this purpose for optimum
 * efficiency. A singly-linked list may only be traversed in the forward
 * direction.  Singly-linked lists are ideal for applications with large
 * datasets and few or no removals or for implementing a LIFO queue.
 *
 * A list is headed by a single forward pointer (or an array of forward
 * pointers for a hash table header). The elements are doubly linked
 * so that an arbitrary element can be removed without a need to
 * traverse the list. New elements can be added to the list before
 * or after an existing element or at the head of the list. A list
 * may only be traversed in the forward direction.
 *
 * A simple queue is headed by a pair of pointers, one the head of the
 * list and the other to the tail of the list. The elements are singly
 * linked to save space, so elements can only be removed from the
 * head of the list. New elements can be added to the list after
 * an existing element, at the head of the list, or at the end of the
 * list. A simple queue may only be traversed in the forward direction.
 *
 * A tail queue is headed by a pair of pointers, one to the head of the
 * list and the other to the tail of the list. The elements are doubly
 * linked so that an arbitrary element can be removed without a need to
 * traverse the list. New elements can be added to the list before or
 * after an existing element, at the head of the list, or at the end of
 * the list. A tail queue may be traversed in either direction.
 *
 * A circle queue is headed by a pair of pointers, one to the head of the
 * list and the other to the tail of the list. The elements are doubly
 * linked so that an arbitrary element can be removed without a need to
 * traverse the list. New elements can be added to the list before or after
 * an existing element, at the head of the list, or at the end of the list.
 * A circle queue may be traversed in either direction, but has a more
 * complex end of list detection.
 *
 * For details on the use of these macros, see the queue(3) manual page.
 */

/*
 * List definitions.
 */
#define	LIST_HEAD(name, type)						\
struct name {								\
	struct type *lh_first;	/* first element */			\
}

#define	LIST_HEAD_INITIALIZER(head)					\
	{ NULL }

#define	LIST_ENTRY(type)						\
struct {								\
	struct type *le_next;	/* next element */			\
	struct type **le_prev;	/* address of previous next element */	\
}

/*
 * List functions.
 */
#define	LIST_INIT(head) do {						\
	(head)->lh_first = NULL;					\
} while (/*CONSTCOND*/0)

#define	LIST_INSERT_AFTER(listelm, elm, field) do {			\
	if (((elm)->field.le_next = (listelm)->field.le_next) != NULL)	\
		(listelm)->field.le_next->field.le_prev =		\
		    &(elm)->field.le_next;				\
	(listelm)->field.le_next = (elm);				\
	(elm)->field.le_prev = &(listelm)->field.le_next;		\
} while (/*CONSTCOND*/0)

#define	LIST_INSERT_BEFORE(listelm, elm, field) do {			\
	(elm)->field.le_prev = (listelm)->field.le_prev;		\
	(elm)->field.le_next = (listelm);				\
	*(listelm)->field.le_prev = (elm);				\
	(listelm)->field.le_prev = &(elm)->field.le_next;		\
} while (/*CONSTCOND*/0)

#define	LIST_INSERT_HEAD(head, elm, field) do {				\
	if (((elm)->field.le_next = (head)->lh_first) != NULL)		\
		(head)->lh_first->field.le_prev = &(elm)->field.le_next;\
	(head)->lh_first = (elm);					\
	(elm)->field.le_prev = &(head)->lh_first;			\
} while (/*CONSTCOND*/0)

#define	LIST_REMOVE(elm, field) do {					\
	if ((elm)->field.le_next != NULL)				\
		(elm)->field.le_next->field.le_prev = 			\
		    (elm)->field.le_prev;				\
	*(elm)->field.le_prev = (elm)->field.le_next;			\
} while (/*CONSTCOND*/0)

#define	LIST_FOREACH(var, head, field)					\
	for ((var) = ((head)->lh_first);				\
		(var);							\
		(var) = ((var)->field.le_next))

/*
 * List access methods.
 */
#define	LIST_EMPTY(head)		((head)->lh_first == NULL)
#define	LIST_FIRST(head)		((head)->lh_first)
#define	LIST_NEXT(elm, field)		((elm)->field.le_next)


/*
 * Singly-linked List definitions.
 */
#define	SLIST_HEAD(name, type)						\
struct name {								\
	struct type *slh_first;	/* first element */			\
}

#define	SLIST_HEAD_INITIALIZER(head)					\
	{ NULL }

#define	SLIST_ENTRY(type)						\
struct {								\
	struct type *sle_next;	/* next element */			\
}

/*
 * Singly-linked List functions.
 */
#define	SLIST_INIT(head) do {						\
	(head)->slh_first = NULL;					\
} while (/*CONSTCOND*/0)

#define	SLIST_INSERT_AFTER(slistelm, elm, field) do {			\
	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
	(slistelm)->field.sle_next = (elm);				\
} while (/*CONSTCOND*/0)

#define	SLIST_INSERT_HEAD(head, elm, field) do {			\
	(elm)->field.sle_next = (head)->slh_first;			\
	(head)->slh_first = (elm);					\
} while (/*CONSTCOND*/0)

#define	SLIST_REMOVE_HEAD(head, field) do {				\
	(head)->slh_first = (head)->slh_first->field.sle_next;		\
} while (/*CONSTCOND*/0)

#define	SLIST_REMOVE(head, elm, type, field) do {			\
	if ((head)->slh_first == (elm)) {				\
		SLIST_REMOVE_HEAD((head), field);			\
	}								\
	else {								\
		struct type *curelm = (head)->slh_first;		\
		while(curelm->field.sle_next != (elm))			\
			curelm = curelm->field.sle_next;		\
		curelm->field.sle_next =				\
		    curelm->field.sle_next->field.sle_next;		\
	}								\
} while (/*CONSTCOND*/0)

#define	SLIST_FOREACH(var, head, field)					\
	for((var) = (head)->slh_first; (var); (var) = (var)->field.sle_next)

/*
 * Singly-linked List access methods.
 */
#define	SLIST_EMPTY(head)	((head)->slh_first == NULL)
#define	SLIST_FIRST(head)	((head)->slh_first)
#define	SLIST_NEXT(elm, field)	((elm)->field.sle_next)


/*
 * Singly-linked Tail queue declarations.
 */
#define	STAILQ_HEAD(name, type)					\
struct name {								\
	struct type *stqh_first;	/* first element */			\
	struct type **stqh_last;	/* addr of last next element */		\
}

#define	STAILQ_HEAD_INITIALIZER(head)					\
	{ NULL, &(head).stqh_first }

#define	STAILQ_ENTRY(type)						\
struct {								\
	struct type *stqe_next;	/* next element */			\
}

/*
 * Singly-linked Tail queue functions.
 */
#define	STAILQ_INIT(head) do {						\
	(head)->stqh_first = NULL;					\
	(head)->stqh_last = &(head)->stqh_first;				\
} while (/*CONSTCOND*/0)

#define	STAILQ_INSERT_HEAD(head, elm, field) do {			\
	if (((elm)->field.stqe_next = (head)->stqh_first) == NULL)	\
		(head)->stqh_last = &(elm)->field.stqe_next;		\
	(head)->stqh_first = (elm);					\
} while (/*CONSTCOND*/0)

#define	STAILQ_INSERT_TAIL(head, elm, field) do {			\
	(elm)->field.stqe_next = NULL;					\
	*(head)->stqh_last = (elm);					\
	(head)->stqh_last = &(elm)->field.stqe_next;			\
} while (/*CONSTCOND*/0)

#define	STAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
	if (((elm)->field.stqe_next = (listelm)->field.stqe_next) == NULL)\
		(head)->stqh_last = &(elm)->field.stqe_next;		\
	(listelm)->field.stqe_next = (elm);				\
} while (/*CONSTCOND*/0)

#define	STAILQ_REMOVE_HEAD(head, field) do {				\
	if (((head)->stqh_first = (head)->stqh_first->field.stqe_next) == NULL) \
		(head)->stqh_last = &(head)->stqh_first;			\
} while (/*CONSTCOND*/0)

#define	STAILQ_REMOVE(head, elm, type, field) do {			\
	if ((head)->stqh_first == (elm)) {				\
		STAILQ_REMOVE_HEAD((head), field);			\
	} else {							\
		struct type *curelm = (head)->stqh_first;		\
		while (curelm->field.stqe_next != (elm))			\
			curelm = curelm->field.stqe_next;		\
		if ((curelm->field.stqe_next =				\
			curelm->field.stqe_next->field.stqe_next) == NULL) \
			    (head)->stqh_last = &(curelm)->field.stqe_next; \
	}								\
} while (/*CONSTCOND*/0)

#define	STAILQ_FOREACH(var, head, field)				\
	for ((var) = ((head)->stqh_first);				\
		(var);							\
		(var) = ((var)->field.stqe_next))

#define	STAILQ_CONCAT(head1, head2) do {				\
	if (!STAILQ_EMPTY((head2))) {					\
		*(head1)->stqh_last = (head2)->stqh_first;		\
		(head1)->stqh_last = (head2)->stqh_last;		\
		STAILQ_INIT((head2));					\
	}								\
} while (/*CONSTCOND*/0)

/*
 * Singly-linked Tail queue access methods.
 */
#define	STAILQ_EMPTY(head)	((head)->stqh_first == NULL)
#define	STAILQ_FIRST(head)	((head)->stqh_first)
#define	STAILQ_NEXT(elm, field)	((elm)->field.stqe_next)


/*
 * Simple queue definitions.
 */
#define	SIMPLEQ_HEAD(name, type)					\
struct name {								\
	struct type *sqh_first;	/* first element */			\
	struct type **sqh_last;	/* addr of last next element */		\
}

#define	SIMPLEQ_HEAD_INITIALIZER(head)					\
	{ NULL, &(head).sqh_first }

#define	SIMPLEQ_ENTRY(type)						\
struct {								\
	struct type *sqe_next;	/* next element */			\
}

/*
 * Simple queue functions.
 */
#define	SIMPLEQ_INIT(head) do {						\
	(head)->sqh_first = NULL;					\
	(head)->sqh_last = &(head)->sqh_first;				\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
		(head)->sqh_last = &(elm)->field.sqe_next;		\
	(head)->sqh_first = (elm);					\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
	(elm)->field.sqe_next = NULL;					\
	*(head)->sqh_last = (elm);					\
	(head)->sqh_last = &(elm)->field.sqe_next;			\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
		(head)->sqh_last = &(elm)->field.sqe_next;		\
	(listelm)->field.sqe_next = (elm);				\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_REMOVE_HEAD(head, field) do {				\
	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
		(head)->sqh_last = &(head)->sqh_first;			\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_REMOVE(head, elm, type, field) do {			\
	if ((head)->sqh_first == (elm)) {				\
		SIMPLEQ_REMOVE_HEAD((head), field);			\
	} else {							\
		struct type *curelm = (head)->sqh_first;		\
		while (curelm->field.sqe_next != (elm))			\
			curelm = curelm->field.sqe_next;		\
		if ((curelm->field.sqe_next =				\
			curelm->field.sqe_next->field.sqe_next) == NULL) \
			    (head)->sqh_last = &(curelm)->field.sqe_next; \
	}								\
} while (/*CONSTCOND*/0)

#define	SIMPLEQ_FOREACH(var, head, field)				\
	for ((var) = ((head)->sqh_first);				\
		(var);							\
		(var) = ((var)->field.sqe_next))

/*
 * Simple queue access methods.
 */
#define	SIMPLEQ_EMPTY(head)		((head)->sqh_first == NULL)
#define	SIMPLEQ_FIRST(head)		((head)->sqh_first)
#define	SIMPLEQ_NEXT(elm, field)	((elm)->field.sqe_next)


/*
 * Tail queue definitions.
 */
#define	_TAILQ_HEAD(name, type, qual)					\
struct name {								\
	qual type *tqh_first;		/* first element */		\
	qual type *qual *tqh_last;	/* addr of last next element */	\
}
#define TAILQ_HEAD(name, type)	_TAILQ_HEAD(name, struct type,)

#define	TAILQ_HEAD_INITIALIZER(head)					\
	{ NULL, &(head).tqh_first }

#define	_TAILQ_ENTRY(type, qual)					\
struct {								\
	qual type *tqe_next;		/* next element */		\
	qual type *qual *tqe_prev;	/* address of previous next element */\
}
#define TAILQ_ENTRY(type)	_TAILQ_ENTRY(struct type,)

/*
 * Tail queue functions.
 */
#define	TAILQ_INIT(head) do {						\
	(head)->tqh_first = NULL;					\
	(head)->tqh_last = &(head)->tqh_first;				\
} while (/*CONSTCOND*/0)

#define	TAILQ_INSERT_HEAD(head, elm, field) do {			\
	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
		(head)->tqh_first->field.tqe_prev =			\
		    &(elm)->field.tqe_next;				\
	else								\
		(head)->tqh_last = &(elm)->field.tqe_next;		\
	(head)->tqh_first = (elm);					\
	(elm)->field.tqe_prev = &(head)->tqh_first;			\
} while (/*CONSTCOND*/0)

#define	TAILQ_INSERT_TAIL(head, elm, field) do {			\
	(elm)->field.tqe_next = NULL;					\
	(elm)->field.tqe_prev = (head)->tqh_last;			\
	*(head)->tqh_last = (elm);					\
	(head)->tqh_last = &(elm)->field.tqe_next;			\
} while (/*CONSTCOND*/0)

#define	TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
		(elm)->field.tqe_next->field.tqe_prev = 		\
		    &(elm)->field.tqe_next;				\
	else								\
		(head)->tqh_last = &(elm)->field.tqe_next;		\
	(listelm)->field.tqe_next = (elm);				\
	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
} while (/*CONSTCOND*/0)

#define	TAILQ_INSERT_BEFORE(listelm, elm, field) do {			\
	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
	(elm)->field.tqe_next = (listelm);				\
	*(listelm)->field.tqe_prev = (elm);				\
	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
} while (/*CONSTCOND*/0)

#define	TAILQ_REMOVE(head, elm, field) do {				\
	if (((elm)->field.tqe_next) != NULL)				\
		(elm)->field.tqe_next->field.tqe_prev = 		\
		    (elm)->field.tqe_prev;				\
	else								\
		(head)->tqh_last = (elm)->field.tqe_prev;		\
	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
} while (/*CONSTCOND*/0)

#define	TAILQ_FOREACH(var, head, field)					\
	for ((var) = ((head)->tqh_first);				\
		(var);							\
		(var) = ((var)->field.tqe_next))

#define	TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
	for ((var) = (*(((struct headname *)((head)->tqh_last))->tqh_last));	\
		(var);							\
		(var) = (*(((struct headname *)((var)->field.tqe_prev))->tqh_last)))

#define	TAILQ_CONCAT(head1, head2, field) do {				\
	if (!TAILQ_EMPTY(head2)) {					\
		*(head1)->tqh_last = (head2)->tqh_first;		\
		(head2)->tqh_first->field.tqe_prev = (head1)->tqh_last;	\
		(head1)->tqh_last = (head2)->tqh_last;			\
		TAILQ_INIT((head2));					\
	}								\
} while (/*CONSTCOND*/0)

/*
 * Tail queue access methods.
 */
#define	TAILQ_EMPTY(head)		((head)->tqh_first == NULL)
#define	TAILQ_FIRST(head)		((head)->tqh_first)
#define	TAILQ_NEXT(elm, field)		((elm)->field.tqe_next)

#define	TAILQ_LAST(head, headname) \
	(*(((struct headname *)((head)->tqh_last))->tqh_last))
#define	TAILQ_PREV(elm, headname, field) \
	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))


/*
 * Circular queue definitions.
 */
#define	CIRCLEQ_HEAD(name, type)					\
struct name {								\
	struct type *cqh_first;		/* first element */		\
	struct type *cqh_last;		/* last element */		\
}

#define	CIRCLEQ_HEAD_INITIALIZER(head)					\
	{ (void *)&head, (void *)&head }

#define	CIRCLEQ_ENTRY(type)						\
struct {								\
	struct type *cqe_next;		/* next element */		\
	struct type *cqe_prev;		/* previous element */		\
}

/*
 * Circular queue functions.
 */
#define	CIRCLEQ_INIT(head) do {						\
	(head)->cqh_first = (void *)(head);				\
	(head)->cqh_last = (void *)(head);				\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
	(elm)->field.cqe_prev = (listelm);				\
	if ((listelm)->field.cqe_next == (void *)(head))		\
		(head)->cqh_last = (elm);				\
	else								\
		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
	(listelm)->field.cqe_next = (elm);				\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {		\
	(elm)->field.cqe_next = (listelm);				\
	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
	if ((listelm)->field.cqe_prev == (void *)(head))		\
		(head)->cqh_first = (elm);				\
	else								\
		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
	(listelm)->field.cqe_prev = (elm);				\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
	(elm)->field.cqe_next = (head)->cqh_first;			\
	(elm)->field.cqe_prev = (void *)(head);				\
	if ((head)->cqh_last == (void *)(head))				\
		(head)->cqh_last = (elm);				\
	else								\
		(head)->cqh_first->field.cqe_prev = (elm);		\
	(head)->cqh_first = (elm);					\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
	(elm)->field.cqe_next = (void *)(head);				\
	(elm)->field.cqe_prev = (head)->cqh_last;			\
	if ((head)->cqh_first == (void *)(head))			\
		(head)->cqh_first = (elm);				\
	else								\
		(head)->cqh_last->field.cqe_next = (elm);		\
	(head)->cqh_last = (elm);					\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_REMOVE(head, elm, field) do {				\
	if ((elm)->field.cqe_next == (void *)(head))			\
		(head)->cqh_last = (elm)->field.cqe_prev;		\
	else								\
		(elm)->field.cqe_next->field.cqe_prev =			\
		    (elm)->field.cqe_prev;				\
	if ((elm)->field.cqe_prev == (void *)(head))			\
		(head)->cqh_first = (elm)->field.cqe_next;		\
	else								\
		(elm)->field.cqe_prev->field.cqe_next =			\
		    (elm)->field.cqe_next;				\
} while (/*CONSTCOND*/0)

#define	CIRCLEQ_FOREACH(var, head, field)				\
	for ((var) = ((head)->cqh_first);				\
		(var) != (const void *)(head);				\
		(var) = ((var)->field.cqe_next))

#define	CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
	for ((var) = ((head)->cqh_last);				\
		(var) != (const void *)(head);				\
		(var) = ((var)->field.cqe_prev))

/*
 * Circular queue access methods.
 */
#define	CIRCLEQ_EMPTY(head)		((head)->cqh_first == (void *)(head))
#define	CIRCLEQ_FIRST(head)		((head)->cqh_first)
#define	CIRCLEQ_LAST(head)		((head)->cqh_last)
#define	CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
#define	CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)

#define CIRCLEQ_LOOP_NEXT(head, elm, field)				\
	(((elm)->field.cqe_next == (void *)(head))			\
	    ? ((head)->cqh_first)					\
	    : (elm->field.cqe_next))
#define CIRCLEQ_LOOP_PREV(head, elm, field)				\
	(((elm)->field.cqe_prev == (void *)(head))			\
	    ? ((head)->cqh_last)					\
	    : (elm->field.cqe_prev))

#endif	/* sys/queue.h */

Filemanager

Name Type Size Permission Actions
acct.h File 3.25 KB 0644
auxv.h File 1.22 KB 0644
bitypes.h File 86 B 0644
cdefs.h File 14.39 KB 0644
debugreg.h File 3.49 KB 0644
dir.h File 922 B 0644
elf.h File 1023 B 0644
epoll.h File 4.34 KB 0644
errno.h File 19 B 0644
eventfd.h File 1.36 KB 0644
fanotify.h File 1.26 KB 0644
fcntl.h File 19 B 0644
file.h File 1.65 KB 0644
fsuid.h File 1.17 KB 0644
gmon.h File 5.97 KB 0644
gmon_out.h File 2.57 KB 0644
inotify.h File 3.75 KB 0644
io.h File 4.97 KB 0644
ioctl.h File 1.72 KB 0644
ipc.h File 1.6 KB 0644
kd.h File 1.09 KB 0644
kdaemon.h File 1.08 KB 0644
klog.h File 1.18 KB 0644
mman.h File 5.44 KB 0644
mount.h File 5.5 KB 0644
msg.h File 2.35 KB 0644
mtio.h File 10.9 KB 0644
param.h File 2.96 KB 0644
pci.h File 917 B 0644
perm.h File 1.11 KB 0644
personality.h File 2.56 KB 0644
poll.h File 2.57 KB 0644
prctl.h File 1.03 KB 0644
procfs.h File 4.85 KB 0644
profil.h File 1.91 KB 0644
ptrace.h File 6.61 KB 0644
queue.h File 19.08 KB 0644
quota.h File 7.72 KB 0644
raw.h File 1.15 KB 0644
reboot.h File 1.59 KB 0644
reg.h File 1.78 KB 0644
resource.h File 3.58 KB 0644
sdt-config.h File 276 B 0644
sdt.h File 18.16 KB 0644
select.h File 4.11 KB 0644
sem.h File 2.01 KB 0644
sendfile.h File 1.77 KB 0644
shm.h File 1.86 KB 0644
signal.h File 20 B 0644
signalfd.h File 1.57 KB 0644
socket.h File 10.24 KB 0644
socketvar.h File 141 B 0644
soundcard.h File 29 B 0644
stat.h File 16.23 KB 0644
statfs.h File 2.06 KB 0644
statvfs.h File 2.77 KB 0644
swap.h File 1.57 KB 0644
syscall.h File 1.32 KB 0644
sysctl.h File 1.98 KB 0644
sysinfo.h File 1.49 KB 0644
syslog.h File 7.52 KB 0644
sysmacros.h File 2.49 KB 0644
termios.h File 74 B 0644
time.h File 6.54 KB 0644
timeb.h File 1.37 KB 0644
timerfd.h File 1.7 KB 0644
times.h File 1.59 KB 0644
timex.h File 2.14 KB 0644
ttychars.h File 2.44 KB 0644
ttydefaults.h File 3.48 KB 0644
types.h File 6.61 KB 0644
ucontext.h File 5.26 KB 0644
uio.h File 4.61 KB 0644
ultrasound.h File 30 B 0644
un.h File 1.43 KB 0644
unistd.h File 20 B 0644
user.h File 5.08 KB 0644
ustat.h File 1.12 KB 0644
utsname.h File 2.44 KB 0644
vfs.h File 161 B 0644
vlimit.h File 1.85 KB 0644
vm86.h File 1.17 KB 0644
vt.h File 22 B 0644
vtimes.h File 2.42 KB 0644
wait.h File 6.44 KB 0644
xattr.h File 4.14 KB 0644