[ Avaa Bypassed ]




Upload:

Command:

hmhc3928@18.117.99.230: ~ $
:mod:`ossaudiodev` --- Access to OSS-compatible audio devices
=============================================================

.. module:: ossaudiodev
   :platform: Linux, FreeBSD
   :synopsis: Access to OSS-compatible audio devices.


.. versionadded:: 2.3

This module allows you to access the OSS (Open Sound System) audio interface.
OSS is available for a wide range of open-source and commercial Unices, and is
the standard audio interface for Linux and recent versions of FreeBSD.

.. Things will get more complicated for future Linux versions, since
   ALSA is in the standard kernel as of 2.5.x.  Presumably if you
   use ALSA, you'll have to make sure its OSS compatibility layer
   is active to use ossaudiodev, but you're gonna need it for the vast
   majority of Linux audio apps anyway.

   Sounds like things are also complicated for other BSDs.  In response
   to my python-dev query, Thomas Wouters said:

   > Likewise, googling shows OpenBSD also uses OSS/Free -- the commercial
   > OSS installation manual tells you to remove references to OSS/Free from the
   > kernel :)

   but Aleksander Piotrowsk actually has an OpenBSD box, and he quotes
   from its <soundcard.h>:
   >  * WARNING!  WARNING!
   >  * This is an OSS (Linux) audio emulator.
   >  * Use the Native NetBSD API for developing new code, and this
   >  * only for compiling Linux programs.

   There's also an ossaudio manpage on OpenBSD that explains things
   further.  Presumably NetBSD and OpenBSD have a different standard
   audio interface.  That's the great thing about standards, there are so
   many to choose from ... ;-)

   This probably all warrants a footnote or two, but I don't understand
   things well enough right now to write it!   --GPW


.. seealso::

   `Open Sound System Programmer's Guide <http://www.opensound.com/pguide/oss.pdf>`_
      the official documentation for the OSS C API

   The module defines a large number of constants supplied by the OSS device
   driver; see ``<sys/soundcard.h>`` on either Linux or FreeBSD for a listing .

:mod:`ossaudiodev` defines the following variables and functions:


.. exception:: OSSAudioError

   This exception is raised on certain errors.  The argument is a string describing
   what went wrong.

   (If :mod:`ossaudiodev` receives an error from a system call such as
   :c:func:`open`, :c:func:`write`, or :c:func:`ioctl`, it raises :exc:`IOError`.
   Errors detected directly by :mod:`ossaudiodev` result in :exc:`OSSAudioError`.)

   (For backwards compatibility, the exception class is also available as
   ``ossaudiodev.error``.)


.. function:: open(mode)
              open(device, mode)

   Open an audio device and return an OSS audio device object.  This object
   supports many file-like methods, such as :meth:`read`, :meth:`write`, and
   :meth:`fileno` (although there are subtle differences between conventional Unix
   read/write semantics and those of OSS audio devices).  It also supports a number
   of audio-specific methods; see below for the complete list of methods.

   *device* is the audio device filename to use.  If it is not specified, this
   module first looks in the environment variable :envvar:`AUDIODEV` for a device
   to use.  If not found, it falls back to :file:`/dev/dsp`.

   *mode* is one of ``'r'`` for read-only (record) access, ``'w'`` for
   write-only (playback) access and ``'rw'`` for both. Since many sound cards
   only allow one process to have the recorder or player open at a time, it is a
   good idea to open the device only for the activity needed.  Further, some
   sound cards are half-duplex: they can be opened for reading or writing, but
   not both at once.

   Note the unusual calling syntax: the *first* argument is optional, and the
   second is required.  This is a historical artifact for compatibility with the
   older :mod:`linuxaudiodev` module which :mod:`ossaudiodev` supersedes.

   .. XXX it might also be motivated
      by my unfounded-but-still-possibly-true belief that the default
      audio device varies unpredictably across operating systems.  -GW


.. function:: openmixer([device])

   Open a mixer device and return an OSS mixer device object.   *device* is the
   mixer device filename to use.  If it is not specified, this module first looks
   in the environment variable :envvar:`MIXERDEV` for a device to use.  If not
   found, it falls back to :file:`/dev/mixer`.


.. _ossaudio-device-objects:

Audio Device Objects
--------------------

Before you can write to or read from an audio device, you must call three
methods in the correct order:

#. :meth:`setfmt` to set the output format

#. :meth:`channels` to set the number of channels

#. :meth:`speed` to set the sample rate

Alternately, you can use the :meth:`setparameters` method to set all three audio
parameters at once.  This is more convenient, but may not be as flexible in all
cases.

The audio device objects returned by :func:`.open` define the following methods
and (read-only) attributes:


.. method:: oss_audio_device.close()

   Explicitly close the audio device.  When you are done writing to or reading from
   an audio device, you should explicitly close it.  A closed device cannot be used
   again.


.. method:: oss_audio_device.fileno()

   Return the file descriptor associated with the device.


.. method:: oss_audio_device.read(size)

   Read *size* bytes from the audio input and return them as a Python string.
   Unlike most Unix device drivers, OSS audio devices in blocking mode (the
   default) will block :func:`read` until the entire requested amount of data is
   available.


.. method:: oss_audio_device.write(data)

   Write the Python string *data* to the audio device and return the number of
   bytes written.  If the audio device is in blocking mode (the default), the
   entire string is always written (again, this is different from usual Unix device
   semantics).  If the device is in non-blocking mode, some data may not be written
   ---see :meth:`writeall`.


.. method:: oss_audio_device.writeall(data)

   Write the entire Python string *data* to the audio device: waits until the audio
   device is able to accept data, writes as much data as it will accept, and
   repeats until *data* has been completely written. If the device is in blocking
   mode (the default), this has the same effect as :meth:`write`; :meth:`writeall`
   is only useful in non-blocking mode.  Has no return value, since the amount of
   data written is always equal to the amount of data supplied.

The following methods each map to exactly one :func:`ioctl` system call.  The
correspondence is obvious: for example, :meth:`setfmt` corresponds to the
``SNDCTL_DSP_SETFMT`` ioctl, and :meth:`sync` to ``SNDCTL_DSP_SYNC`` (this can
be useful when consulting the OSS documentation).  If the underlying
:func:`ioctl` fails, they all raise :exc:`IOError`.


.. method:: oss_audio_device.nonblock()

   Put the device into non-blocking mode.  Once in non-blocking mode, there is no
   way to return it to blocking mode.


.. method:: oss_audio_device.getfmts()

   Return a bitmask of the audio output formats supported by the soundcard.  Some
   of the formats supported by OSS are:

   +-------------------------+---------------------------------------------+
   | Format                  | Description                                 |
   +=========================+=============================================+
   | :const:`AFMT_MU_LAW`    | a logarithmic encoding (used by Sun ``.au`` |
   |                         | files and :file:`/dev/audio`)               |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_A_LAW`     | a logarithmic encoding                      |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_IMA_ADPCM` | a 4:1 compressed format defined by the      |
   |                         | Interactive Multimedia Association          |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_U8`        | Unsigned, 8-bit audio                       |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_S16_LE`    | Signed, 16-bit audio, little-endian byte    |
   |                         | order (as used by Intel processors)         |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_S16_BE`    | Signed, 16-bit audio, big-endian byte order |
   |                         | (as used by 68k, PowerPC, Sparc)            |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_S8`        | Signed, 8 bit audio                         |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_U16_LE`    | Unsigned, 16-bit little-endian audio        |
   +-------------------------+---------------------------------------------+
   | :const:`AFMT_U16_BE`    | Unsigned, 16-bit big-endian audio           |
   +-------------------------+---------------------------------------------+

   Consult the OSS documentation for a full list of audio formats, and note that
   most devices support only a subset of these formats.  Some older devices only
   support :const:`AFMT_U8`; the most common format used today is
   :const:`AFMT_S16_LE`.


.. method:: oss_audio_device.setfmt(format)

   Try to set the current audio format to *format*---see :meth:`getfmts` for a
   list.  Returns the audio format that the device was set to, which may not be the
   requested format.  May also be used to return the current audio format---do this
   by passing an "audio format" of :const:`AFMT_QUERY`.


.. method:: oss_audio_device.channels(nchannels)

   Set the number of output channels to *nchannels*.  A value of 1 indicates
   monophonic sound, 2 stereophonic.  Some devices may have more than 2 channels,
   and some high-end devices may not support mono. Returns the number of channels
   the device was set to.


.. method:: oss_audio_device.speed(samplerate)

   Try to set the audio sampling rate to *samplerate* samples per second.  Returns
   the rate actually set.  Most sound devices don't support arbitrary sampling
   rates.  Common rates are:

   +-------+-------------------------------------------+
   | Rate  | Description                               |
   +=======+===========================================+
   | 8000  | default rate for :file:`/dev/audio`       |
   +-------+-------------------------------------------+
   | 11025 | speech recording                          |
   +-------+-------------------------------------------+
   | 22050 |                                           |
   +-------+-------------------------------------------+
   | 44100 | CD quality audio (at 16 bits/sample and 2 |
   |       | channels)                                 |
   +-------+-------------------------------------------+
   | 96000 | DVD quality audio (at 24 bits/sample)     |
   +-------+-------------------------------------------+


.. method:: oss_audio_device.sync()

   Wait until the sound device has played every byte in its buffer.  (This happens
   implicitly when the device is closed.)  The OSS documentation recommends closing
   and re-opening the device rather than using :meth:`sync`.


.. method:: oss_audio_device.reset()

   Immediately stop playing or recording and return the device to a state where it
   can accept commands.  The OSS documentation recommends closing and re-opening
   the device after calling :meth:`reset`.


.. method:: oss_audio_device.post()

   Tell the driver that there is likely to be a pause in the output, making it
   possible for the device to handle the pause more intelligently.  You might use
   this after playing a spot sound effect, before waiting for user input, or before
   doing disk I/O.

The following convenience methods combine several ioctls, or one ioctl and some
simple calculations.


.. method:: oss_audio_device.setparameters(format, nchannels, samplerate[, strict=False])

   Set the key audio sampling parameters---sample format, number of channels, and
   sampling rate---in one method call.  *format*,  *nchannels*, and *samplerate*
   should be as specified in the :meth:`setfmt`, :meth:`channels`, and
   :meth:`speed`  methods.  If *strict* is true, :meth:`setparameters` checks to
   see if each parameter was actually set to the requested value, and raises
   :exc:`OSSAudioError` if not.  Returns a tuple (*format*, *nchannels*,
   *samplerate*) indicating the parameter values that were actually set by the
   device driver (i.e., the same as the return values of :meth:`setfmt`,
   :meth:`channels`, and :meth:`speed`).

   For example,  ::

      (fmt, channels, rate) = dsp.setparameters(fmt, channels, rate)

   is equivalent to  ::

      fmt = dsp.setfmt(fmt)
      channels = dsp.channels(channels)
      rate = dsp.rate(channels)


.. method:: oss_audio_device.bufsize()

   Returns the size of the hardware buffer, in samples.


.. method:: oss_audio_device.obufcount()

   Returns the number of samples that are in the hardware buffer yet to be played.


.. method:: oss_audio_device.obuffree()

   Returns the number of samples that could be queued into the hardware buffer to
   be played without blocking.

Audio device objects also support several read-only attributes:


.. attribute:: oss_audio_device.closed

   Boolean indicating whether the device has been closed.


.. attribute:: oss_audio_device.name

   String containing the name of the device file.


.. attribute:: oss_audio_device.mode

   The I/O mode for the file, either ``"r"``, ``"rw"``, or ``"w"``.


.. _mixer-device-objects:

Mixer Device Objects
--------------------

The mixer object provides two file-like methods:


.. method:: oss_mixer_device.close()

   This method closes the open mixer device file.  Any further attempts to use the
   mixer after this file is closed will raise an :exc:`IOError`.


.. method:: oss_mixer_device.fileno()

   Returns the file handle number of the open mixer device file.

The remaining methods are specific to audio mixing:


.. method:: oss_mixer_device.controls()

   This method returns a bitmask specifying the available mixer controls ("Control"
   being a specific mixable "channel", such as :const:`SOUND_MIXER_PCM` or
   :const:`SOUND_MIXER_SYNTH`).  This bitmask indicates a subset of all available
   mixer controls---the :const:`SOUND_MIXER_\*` constants defined at module level.
   To determine if, for example, the current mixer object supports a PCM mixer, use
   the following Python code::

      mixer=ossaudiodev.openmixer()
      if mixer.controls() & (1 << ossaudiodev.SOUND_MIXER_PCM):
          # PCM is supported
          ... code ...

   For most purposes, the :const:`SOUND_MIXER_VOLUME` (master volume) and
   :const:`SOUND_MIXER_PCM` controls should suffice---but code that uses the mixer
   should be flexible when it comes to choosing mixer controls.  On the Gravis
   Ultrasound, for example, :const:`SOUND_MIXER_VOLUME` does not exist.


.. method:: oss_mixer_device.stereocontrols()

   Returns a bitmask indicating stereo mixer controls.  If a bit is set, the
   corresponding control is stereo; if it is unset, the control is either
   monophonic or not supported by the mixer (use in combination with
   :meth:`controls` to determine which).

   See the code example for the :meth:`controls` function for an example of getting
   data from a bitmask.


.. method:: oss_mixer_device.reccontrols()

   Returns a bitmask specifying the mixer controls that may be used to record.  See
   the code example for :meth:`controls` for an example of reading from a bitmask.


.. method:: oss_mixer_device.get(control)

   Returns the volume of a given mixer control.  The returned volume is a 2-tuple
   ``(left_volume,right_volume)``.  Volumes are specified as numbers from 0
   (silent) to 100 (full volume).  If the control is monophonic, a 2-tuple is still
   returned, but both volumes are the same.

   Raises :exc:`OSSAudioError` if an invalid control was is specified, or
   :exc:`IOError` if an unsupported control is specified.


.. method:: oss_mixer_device.set(control, (left, right))

   Sets the volume for a given mixer control to ``(left,right)``. ``left`` and
   ``right`` must be ints and between 0 (silent) and 100 (full volume).  On
   success, the new volume is returned as a 2-tuple. Note that this may not be
   exactly the same as the volume specified, because of the limited resolution of
   some soundcard's mixers.

   Raises :exc:`OSSAudioError` if an invalid mixer control was specified, or if the
   specified volumes were out-of-range.


.. method:: oss_mixer_device.get_recsrc()

   This method returns a bitmask indicating which control(s) are currently being
   used as a recording source.


.. method:: oss_mixer_device.set_recsrc(bitmask)

   Call this function to specify a recording source.  Returns a bitmask indicating
   the new recording source (or sources) if successful; raises :exc:`IOError` if an
   invalid source was specified.  To set the current recording source to the
   microphone input::

      mixer.setrecsrc (1 << ossaudiodev.SOUND_MIXER_MIC)


Filemanager

Name Type Size Permission Actions
2to3.txt File 12.37 KB 0644
__builtin__.txt File 1.45 KB 0644
__future__.txt File 4.84 KB 0644
__main__.txt File 535 B 0644
_winreg.txt File 22.76 KB 0644
abc.txt File 6.99 KB 0644
aepack.txt File 4.16 KB 0644
aetools.txt File 3.45 KB 0644
aetypes.txt File 4.16 KB 0644
aifc.txt File 6.91 KB 0644
al.txt File 5.18 KB 0644
allos.txt File 695 B 0644
anydbm.txt File 3.87 KB 0644
archiving.txt File 424 B 0644
argparse.txt File 68.77 KB 0644
array.txt File 10.4 KB 0644
ast.txt File 9.7 KB 0644
asynchat.txt File 8.99 KB 0644
asyncore.txt File 12.37 KB 0644
atexit.txt File 3.81 KB 0644
audioop.txt File 10.15 KB 0644
autogil.txt File 1015 B 0644
base64.txt File 5.93 KB 0644
basehttpserver.txt File 9.98 KB 0644
bastion.txt File 2.55 KB 0644
bdb.txt File 12.14 KB 0644
binascii.txt File 6.04 KB 0644
binhex.txt File 1.87 KB 0644
bisect.txt File 5.29 KB 0644
bsddb.txt File 7.4 KB 0644
bz2.txt File 7.72 KB 0644
calendar.txt File 11.01 KB 0644
carbon.txt File 15.58 KB 0644
cd.txt File 11.69 KB 0644
cgi.txt File 22.12 KB 0644
cgihttpserver.txt File 2.72 KB 0644
cgitb.txt File 2.81 KB 0644
chunk.txt File 4.82 KB 0644
cmath.txt File 7.45 KB 0644
cmd.txt File 8.14 KB 0644
code.txt File 6.93 KB 0644
codecs.txt File 63.19 KB 0644
codeop.txt File 3.69 KB 0644
collections.txt File 40.08 KB 0644
colorpicker.txt File 913 B 0644
colorsys.txt File 1.78 KB 0644
commands.txt File 2.53 KB 0644
compileall.txt File 4.49 KB 0644
compiler.txt File 36.59 KB 0644
configparser.txt File 19 KB 0644
constants.txt File 2.18 KB 0644
contextlib.txt File 5.36 KB 0644
cookie.txt File 9.3 KB 0644
cookielib.txt File 27.09 KB 0644
copy.txt File 3.29 KB 0644
copy_reg.txt File 2.27 KB 0644
crypt.txt File 2.24 KB 0644
crypto.txt File 771 B 0644
csv.txt File 21.07 KB 0644
ctypes.txt File 86.41 KB 0644
curses.ascii.txt File 8.8 KB 0644
curses.panel.txt File 2.68 KB 0644
curses.txt File 70.87 KB 0644
custominterp.txt File 570 B 0644
datatypes.txt File 864 B 0644
datetime.txt File 68.78 KB 0644
dbhash.txt File 3.77 KB 0644
dbm.txt File 2.89 KB 0644
debug.txt File 446 B 0644
decimal.txt File 68.95 KB 0644
development.txt File 640 B 0644
difflib.txt File 29.85 KB 0644
dircache.txt File 1.77 KB 0644
dis.txt File 20.82 KB 0644
distutils.txt File 1.13 KB 0644
dl.txt File 3.31 KB 0644
doctest.txt File 71.42 KB 0644
docxmlrpcserver.txt File 3.66 KB 0644
dumbdbm.txt File 2.62 KB 0644
dummy_thread.txt File 1.03 KB 0644
dummy_threading.txt File 799 B 0644
easydialogs.txt File 10.1 KB 0644
email-examples.txt File 1.24 KB 0644
email.charset.txt File 9.42 KB 0644
email.encoders.txt File 2.32 KB 0644
email.errors.txt File 3.73 KB 0644
email.generator.txt File 5.99 KB 0644
email.header.txt File 7.35 KB 0644
email.iterators.txt File 2.28 KB 0644
email.message.txt File 24.56 KB 0644
email.mime.txt File 9.42 KB 0644
email.parser.txt File 9.71 KB 0644
email.txt File 14.61 KB 0644
email.util.txt File 6.43 KB 0644
errno.txt File 6.55 KB 0644
exceptions.txt File 18.01 KB 0644
fcntl.txt File 6.65 KB 0644
filecmp.txt File 5.22 KB 0644
fileformats.txt File 302 B 0644
fileinput.txt File 7.06 KB 0644
filesys.txt File 806 B 0644
fl.txt File 17.23 KB 0644
fm.txt File 2.64 KB 0644
fnmatch.txt File 3.03 KB 0644
formatter.txt File 12.92 KB 0644
fpectl.txt File 4.07 KB 0644
fpformat.txt File 1.71 KB 0644
fractions.txt File 5.17 KB 0644
framework.txt File 11.18 KB 0644
frameworks.txt File 378 B 0644
ftplib.txt File 14.79 KB 0644
functions.txt File 72.74 KB 0644
functools.txt File 7.15 KB 0644
future_builtins.txt File 1.86 KB 0644
gc.txt File 8.76 KB 0644
gdbm.txt File 4.71 KB 0644
gensuitemodule.txt File 3.04 KB 0644
getopt.txt File 6.51 KB 0644
getpass.txt File 1.9 KB 0644
gettext.txt File 28.35 KB 0644
gl.txt File 5.87 KB 0644
glob.txt File 2.31 KB 0644
grp.txt File 2.2 KB 0644
gzip.txt File 4.62 KB 0644
hashlib.txt File 5.01 KB 0644
heapq.txt File 12.64 KB 0644
hmac.txt File 1.82 KB 0644
hotshot.txt File 4.19 KB 0644
htmllib.txt File 7.03 KB 0644
htmlparser.txt File 11.34 KB 0644
httplib.txt File 35.65 KB 0644
i18n.txt File 409 B 0644
ic.txt File 4.89 KB 0644
idle.txt File 7.88 KB 0644
imageop.txt File 3.91 KB 0644
imaplib.txt File 16.77 KB 0644
imgfile.txt File 2.7 KB 0644
imghdr.txt File 2.57 KB 0644
imp.txt File 12.3 KB 0644
importlib.txt File 1.1 KB 0644
imputil.txt File 6.86 KB 0644
index.txt File 2.23 KB 0644
inspect.txt File 27.21 KB 0644
internet.txt File 950 B 0644
intro.txt File 2.74 KB 0644
io.txt File 36.31 KB 0644
ipc.txt File 631 B 0644
itertools.txt File 34.69 KB 0644
jpeg.txt File 3.77 KB 0644
json.txt File 23.39 KB 0644
keyword.txt File 617 B 0644
language.txt File 523 B 0644
linecache.txt File 1.84 KB 0644
locale.txt File 24.19 KB 0644
logging.config.txt File 29.76 KB 0644
logging.handlers.txt File 26.45 KB 0644
logging.txt File 43.67 KB 0644
mac.txt File 791 B 0644
macos.txt File 3.73 KB 0644
macosa.txt File 3.87 KB 0644
macostools.txt File 3.92 KB 0644
macpath.txt File 650 B 0644
mailbox.txt File 66.51 KB 0644
mailcap.txt File 3.59 KB 0644
markup.txt File 1.22 KB 0644
marshal.txt File 5.47 KB 0644
math.txt File 10.64 KB 0644
md5.txt File 2.75 KB 0644
mhlib.txt File 3.87 KB 0644
mimetools.txt File 4.4 KB 0644
mimetypes.txt File 9.3 KB 0644
mimewriter.txt File 3.2 KB 0644
mimify.txt File 3.44 KB 0644
miniaeframe.txt File 2.5 KB 0644
misc.txt File 248 B 0644
mm.txt File 447 B 0644
mmap.txt File 10.02 KB 0644
modulefinder.txt File 3.3 KB 0644
modules.txt File 382 B 0644
msilib.txt File 18.94 KB 0644
msvcrt.txt File 4.24 KB 0644
multifile.txt File 6.46 KB 0644
multiprocessing.txt File 79.92 KB 0644
mutex.txt File 1.89 KB 0644
netdata.txt File 432 B 0644
netrc.txt File 2.54 KB 0644
new.txt File 2.59 KB 0644
nis.txt File 2.06 KB 0644
nntplib.txt File 14.18 KB 0644
numbers.txt File 7.82 KB 0644
numeric.txt File 751 B 0644
operator.txt File 21.57 KB 0644
optparse.txt File 75.22 KB 0644
os.path.txt File 12.45 KB 0644
os.txt File 79.94 KB 0644
ossaudiodev.txt File 16.9 KB 0644
othergui.txt File 2.73 KB 0644
parser.txt File 15.02 KB 0644
pdb.txt File 15.61 KB 0644
persistence.txt File 826 B 0644
pickle.txt File 36.25 KB 0644
pickletools.txt File 1.95 KB 0644
pipes.txt File 3.7 KB 0644
pkgutil.txt File 7.53 KB 0644
platform.txt File 9.15 KB 0644
plistlib.txt File 4.02 KB 0644
popen2.txt File 6.86 KB 0644
poplib.txt File 6.07 KB 0644
posix.txt File 3.51 KB 0644
posixfile.txt File 7.03 KB 0644
pprint.txt File 8.86 KB 0644
profile.txt File 27.81 KB 0644
pty.txt File 1.72 KB 0644
pwd.txt File 2.66 KB 0644
py_compile.txt File 2.42 KB 0644
pyclbr.txt File 3.22 KB 0644
pydoc.txt File 3.34 KB 0644
pyexpat.txt File 27.83 KB 0644
python.txt File 531 B 0644
queue.txt File 6.8 KB 0644
quopri.txt File 2.61 KB 0644
random.txt File 12.71 KB 0644
re.txt File 51.28 KB 0644
readline.txt File 7.08 KB 0644
repr.txt File 4.57 KB 0644
resource.txt File 9.61 KB 0644
restricted.txt File 3.24 KB 0644
rexec.txt File 11.47 KB 0644
rfc822.txt File 13.71 KB 0644
rlcompleter.txt File 2.44 KB 0644
robotparser.txt File 2.14 KB 0644
runpy.txt File 6.46 KB 0644
sched.txt File 4.49 KB 0644
scrolledtext.txt File 1.32 KB 0644
select.txt File 20.17 KB 0644
sets.txt File 14.54 KB 0644
sgi.txt File 322 B 0644
sgmllib.txt File 10.41 KB 0644
sha.txt File 2.74 KB 0644
shelve.txt File 7.96 KB 0644
shlex.txt File 10.82 KB 0644
shutil.txt File 12.88 KB 0644
signal.txt File 10.33 KB 0644
simplehttpserver.txt File 4.34 KB 0644
simplexmlrpcserver.txt File 9.7 KB 0644
site.txt File 7.4 KB 0644
smtpd.txt File 2.31 KB 0644
smtplib.txt File 14.1 KB 0644
sndhdr.txt File 1.72 KB 0644
socket.txt File 39.7 KB 0644
socketserver.txt File 20.12 KB 0644
someos.txt File 599 B 0644
spwd.txt File 2.76 KB 0644
sqlite3.txt File 34.28 KB 0644
ssl.txt File 27.8 KB 0644
stat.txt File 7.59 KB 0644
statvfs.txt File 1.27 KB 0644
stdtypes.txt File 115.81 KB 0644
string.txt File 42.78 KB 0644
stringio.txt File 4 KB 0644
stringprep.txt File 4.15 KB 0644
strings.txt File 746 B 0644
struct.txt File 16.7 KB 0644
subprocess.txt File 32.68 KB 0644
sun.txt File 249 B 0644
sunau.txt File 6.96 KB 0644
sunaudio.txt File 5.71 KB 0644
symbol.txt File 975 B 0644
symtable.txt File 4.89 KB 0644
sys.txt File 45.76 KB 0644
sysconfig.txt File 7.38 KB 0644
syslog.txt File 3.84 KB 0644
tabnanny.txt File 1.97 KB 0644
tarfile.txt File 26.51 KB 0644
telnetlib.txt File 7.31 KB 0644
tempfile.txt File 10.23 KB 0644
termios.txt File 3.66 KB 0644
test.txt File 17.06 KB 0644
textwrap.txt File 8.35 KB 0644
thread.txt File 6.59 KB 0644
threading.txt File 31.1 KB 0644
time.txt File 24.79 KB 0644
timeit.txt File 11.25 KB 0644
tix.txt File 22.17 KB 0644
tk.txt File 1.57 KB 0644
tkinter.txt File 30.56 KB 0644
token.txt File 2.39 KB 0644
tokenize.txt File 5 KB 0644
trace.txt File 6.57 KB 0644
traceback.txt File 10.45 KB 0644
ttk.txt File 56.02 KB 0644
tty.txt File 1011 B 0644
turtle.txt File 62.57 KB 0644
types.txt File 6.04 KB 0644
undoc.txt File 6.4 KB 0644
unicodedata.txt File 5.59 KB 0644
unittest.txt File 80.78 KB 0644
unix.txt File 490 B 0644
urllib.txt File 22.47 KB 0644
urllib2.txt File 33.13 KB 0644
urlparse.txt File 15.61 KB 0644
user.txt File 2.68 KB 0644
userdict.txt File 8.69 KB 0644
uu.txt File 2.31 KB 0644
uuid.txt File 8.17 KB 0644
warnings.txt File 19.32 KB 0644
wave.txt File 4.93 KB 0644
weakref.txt File 12.66 KB 0644
webbrowser.txt File 8.97 KB 0644
whichdb.txt File 931 B 0644
windows.txt File 273 B 0644
winsound.txt File 4.87 KB 0644
wsgiref.txt File 29.84 KB 0644
xdrlib.txt File 7.89 KB 0644
xml.dom.minidom.txt File 10.91 KB 0644
xml.dom.pulldom.txt File 1.53 KB 0644
xml.dom.txt File 39.2 KB 0644
xml.etree.elementtree.txt File 31.82 KB 0644
xml.sax.handler.txt File 14.93 KB 0644
xml.sax.reader.txt File 11.65 KB 0644
xml.sax.txt File 6.06 KB 0644
xml.sax.utils.txt File 3.4 KB 0644
xml.txt File 5.56 KB 0644
xmlrpclib.txt File 21.4 KB 0644
zipfile.txt File 17.22 KB 0644
zipimport.txt File 5.78 KB 0644
zlib.txt File 10.13 KB 0644