[ Avaa Bypassed ]

Upload:

Command:

hmhc3928@18.227.105.164: ~ $ 
###############################################################################
#  In this test case, we check how changes to temporary tables are written
#  to the binary log.
#
#
# B - Begin
# C - Commit
# R - Rollback
#
#
# T - Inserts a row into a T-table
# N-Temp - Inserts a row into a temporary N-table.
#
#
# T-SELECT-N-Temp - Selects from a temporary N-table and inserts
#                   into a T-table.
# N-SELECT-N-Temp - Selects from a temporary N-table and inserts
#                   into a N-table.
# T-SELECT-T-Temp - Selects from a temporary T-table and inserts
#                   into a T-table.
# N-SELECT-T-Temp - Selects from a temporary T-table and inserts
#                   into a N-table.

# Create-N-Temp - Creates a temporary N-table if a temporary N-table
#                 was dropped before
# Create-T-Temp - Creates a temporary T-table if a temporary T-table
#                 was dropped before
#
#
# Drop-Temp-T-Temp - Drops a temporary T-table if there is any
# Drop-Temp-N-Temp - Drops a temporary N-table if there is any
# Drop-Temp-TN-Temp - Drops both a temporary T-table and N-table if there
#                     is any
# Drop-Temp-TT-Temp - Drops two temporary T-tables if there is any
# Drop-Temp-NN-Temp - Drops two temporary N-tables if there is any
# Drop-Temp-Xe-Temp - Tries to drop a temporary table that does not exist
# Drop-Temp-NXe-Temp - Drops a temporary N-table if there is any and
#                      a temporary table that does not exist
# Drop-Temp-TXe-Temp - Drops a temporary T-table if there is any and
#                      a temporary table that does not exist
#
#
# Drop-Temp-If-Xe-Temp - Tries to drop a temporary table that does not exist
# Drop-Temp-If-TXe-Temp - Drops a temporary T-table if there is any and
#                         a temporary table that does not exist
#
#
# Drop-T - Drops a T-table if there is any
# Drop-N - Drops a  N-table if there is any
# Drop-Xe - Tries to drop a table that does not exist
# Drop-TXe - Drops a T-table if there is any and a table that does
#            not exist
# Drop-NXe - Drops a N-table if there is any and a table that does
#            not exist
# Drop-TN - Drops both a T-table and N-table if there is any
# Drop-TT - Drops two T-tables if there is any
# Drop-NN - Drops two N-tables if there is any
# Drop-N-TN-Temp - Drops a N-table and both a temporary T-table and
#                  N-table if there is any
#
#
# Drop-If-Xe - Tries to drop a table that does not exist
# Drop-If-TXe - Drops a T-table if there is any and a table that does
#               not exist
#
#
# This test uses the commands available at:
#   extra/rpl_tests/rpl_drop_create_temp_table.inc
#
###############################################################################


--echo #########################################################################
--echo #                            CONFIGURATION
--echo #########################################################################

call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");

--let $tot_table= 2
SET @commands= 'configure';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo #########################################################################
--echo #           1 - Tables dropped by "DROP TEMPORARY TABLE"
--echo #########################################################################
connection master;

--echo
--echo #
--echo #1) Generates in the binlog what follows:
--echo #
SET @commands= 'Drop-Temp-T-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-N-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-Xe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-If-Xe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-TXe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-If-TXe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-NXe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-If-NXe-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-TN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-TT-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-NN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo #
--echo #2) Generates in the binlog what follows:
--echo #
SET @commands= 'B T Drop-Temp-T-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-T-Temp N Drop-Temp-T-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-N-Temp N Drop-Temp-N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-Xe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-Xe-Temp N Drop-Temp-Xe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-Xe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-Xe-Temp N Drop-Temp-If-Xe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TXe-Temp N Drop-Temp-TXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-TXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-TXe-Temp N Drop-Temp-If-TXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NXe-Temp N Drop-Temp-NXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-NXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-NXe-Temp N Drop-Temp-If-NXe-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TN-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TN-Temp N Drop-Temp-TN-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TT-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TT-Temp N Drop-Temp-TT-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp Ne C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp Te C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp NeT-trig C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo #
--echo #3) Generates in the binlog what follows:
--echo #
SET @commands= 'B T Drop-Temp-T-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-T-Temp N Drop-Temp-T-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-N-Temp N Drop-Temp-N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-Xe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-Xe-Temp N Drop-Temp-Xe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-Xe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-Xe-Temp N Drop-Temp-If-Xe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TXe-Temp N Drop-Temp-TXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-TXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-TXe-Temp N Drop-Temp-If-TXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NXe-Temp N Drop-Temp-NXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-NXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-If-NXe-Temp N Drop-Temp-If-NXe-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TN-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TN-Temp N Drop-Temp-TN-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TT-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-TT-Temp N Drop-Temp-TT-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp Ne R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp Te R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Temp-NN-Temp N Drop-Temp-NN-Temp NeT-trig R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo #########################################################################
--echo #                   2 - Tables dropped by "DROP TABLE"
--echo #########################################################################
connection master;

--echo
--echo #
--echo #1) Generates in the binlog what follows:
--echo #
SET @commands= 'Drop-T';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-N';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Xe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-If-Xe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-TXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-If-TXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-NXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-If-NXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-TN';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-TT';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-NN';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-N-TN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-TN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo #
--echo #2) Generates in the binlog what follows:
--echo #
SET @commands= 'B T Drop-T';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-N';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-Xe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-If-Xe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-TXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-If-TXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-NXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-If-NXe';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-TN';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-TT';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-NN';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-N-TN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B T Drop-TN-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo #########################################################################
--echo #                      3 - CREATE TEMPORARY TABLE
--echo #########################################################################
connection master;

--echo
--echo #
--echo #1) Generates in the binlog what follows:
--echo #
SET @commands= 'Drop-Temp-N-Temp Create-N-Temp Drop-Temp-N-Temp Drop-Temp-N-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo #
--echo #2) Generates in the binlog what follows:
--echo #
SET @commands= 'B T Drop-Temp-N-Temp Create-N-Temp Drop-Temp-N-Temp Drop-Temp-N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp Ne C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp Te C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp NeT-trig C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo #
--echo #3) Generates in the binlog what follows:
--echo #
SET @commands= 'B T Drop-Temp-N-Temp Create-N-Temp Drop-Temp-N-Temp Drop-Temp-N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp Ne R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp Te R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B Drop-Temp-T-Temp Create-T-Temp Drop-Temp-T-Temp Drop-Temp-T-Temp NeT-trig R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo #########################################################################
--echo #                     4 -  CHANGING TEMPORARY TABLES
--echo #########################################################################
connection master;

--echo
--echo #
--echo #1) Generates in the binlog what follows:
--echo #
SET @commands= 'B N N-Temp N-SELECT-N-Temp N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-N-Temp N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp N-SELECT-T-Temp N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp Ne C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp Te C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp NeT-trig C';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo
--echo
--echo #
--echo #2) Generates in the binlog what follows:
--echo #
SET @commands= 'B N N-Temp N-SELECT-N-Temp N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-N-Temp N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp N-SELECT-T-Temp N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp Ne R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp Te R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

SET @commands= 'B N N-Temp T-SELECT-T-Temp N-Temp NeT-trig R';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

--echo ###################################################################################
--echo #                               CHECK CONSISTENCY
--echo ###################################################################################
connection master;
sync_slave_with_master;

let $MYSQLD_DATADIR= `SELECT @@datadir`;

if (`select @@session.binlog_format != 'STATEMENT'`)
{
  --exec $MYSQL_DUMP --compact --order-by-primary --skip-extended-insert --no-create-info test > $MYSQLD_DATADIR/test-temporary-master.sql
  --exec $MYSQL_DUMP_SLAVE --compact --order-by-primary --skip-extended-insert --no-create-info test > $MYSQLD_DATADIR/test-temporary-slave.sql
  --diff_files $MYSQLD_DATADIR/test-temporary-master.sql $MYSQLD_DATADIR/test-temporary-slave.sql
}

--echo #########################################################################
--echo #                           CLEAN
--echo #########################################################################
SET @commands= 'clean';
--source extra/rpl_tests/rpl_drop_create_temp_table.inc

Filemanager

DIR : / usr/ share/ mysql-test/ extra/ rpl_tests/
Name Type Size Permission Actions
check_type.inc File 1.95 KB 0644
create_recursive_construct.inc File 17.38 KB 0644
create_recursive_construct_stmt_capable_engine.inc File 16.72 KB 0644
delayed_slave_wait_on_query.inc File 1.59 KB 0644
grep_pattern.inc File 598 B 0644
rpl_EE_err.test File 1.03 KB 0644
rpl_auto_increment.test File 8.43 KB 0644
rpl_auto_increment_insert_view.test File 1.37 KB 0644
rpl_auto_increment_invoke_trigger.test File 2.47 KB 0644
rpl_autoinc_func_invokes_trigger.test File 1.78 KB 0644
rpl_binlog_error.inc File 17.24 KB 0644
rpl_binlog_max_cache_size.test File 17.42 KB 0644
rpl_blackhole.test File 1.03 KB 0644
rpl_change_master.test File 10.5 KB 0644
rpl_change_master_bind.inc File 2.23 KB 0644
rpl_charset.test File 4.45 KB 0644
rpl_check_gtid.inc File 4.87 KB 0644
rpl_commit_after_flush.test File 296 B 0644
rpl_conflicts.test File 5.45 KB 0644
rpl_crash_safe.inc File 4.13 KB 0644
rpl_crash_safe.test File 7.61 KB 0644
rpl_db_stmts_ignored.inc File 1.7 KB 0644
rpl_ddl.test File 21.59 KB 0644
rpl_deadlock.test File 5.53 KB 0644
rpl_delete_no_where.test File 523 B 0644
rpl_do_table_filter_insensitive.inc File 492 B 0644
rpl_do_table_filter_sensitive.inc File 491 B 0644
rpl_drop_create_temp_table.inc File 29.76 KB 0644
rpl_drop_create_temp_table.test File 17.8 KB 0644
rpl_extra_col_master.test File 31.89 KB 0644
rpl_extra_col_slave.test File 28.7 KB 0644
rpl_failed_optimize.test File 666 B 0644
rpl_filters.test File 496 B 0644
rpl_flsh_tbls.test File 1.79 KB 0644
rpl_foreign_key.test File 1.7 KB 0644
rpl_generate_mts_gap.test File 1.62 KB 0644
rpl_get_master_version_and_clock.test File 2.88 KB 0644
rpl_gtid_drop_table.inc File 1.11 KB 0644
rpl_gtid_mts_relay_log_recovery.test File 3.78 KB 0644
rpl_gtid_temp_table_in_func_or_trigger.inc File 3.69 KB 0644
rpl_gtids_restart_slave_io_lost_trx.test File 3.48 KB 0644
rpl_heartbeat_2slaves.inc File 4.27 KB 0644
rpl_ignore_table_filter_insensitive.inc File 508 B 0644
rpl_ignore_table_filter_sensitive.inc File 506 B 0644
rpl_implicit_commit_binlog.test File 16.65 KB 0644
rpl_innodb.test File 4.49 KB 0644
rpl_insert_delayed.test File 4.63 KB 0644
rpl_insert_id.test File 15.12 KB 0644
rpl_insert_id_pk.test File 2.65 KB 0644
rpl_insert_ignore.test File 4.74 KB 0644
rpl_insert_ignore_gtid_on.inc File 466 B 0644
rpl_kill_query.inc File 4.14 KB 0644
rpl_loaddata.test File 8.72 KB 0644
rpl_loaddata_s.inc File 896 B 0644
rpl_loadfile.test File 1.07 KB 0644
rpl_log.test File 5.29 KB 0644
rpl_lower_case_table_names.test File 4.07 KB 0644
rpl_max_relay_size.test File 2.58 KB 0644
rpl_mixing_engines.inc File 22.85 KB 0644
rpl_mixing_engines.test File 54.43 KB 0644
rpl_mts_crash_safe.inc File 5.87 KB 0644
rpl_mts_crash_safe.test File 5.47 KB 0644
rpl_mts_execute_partial_trx_in_relay_log.inc File 1.11 KB 0644
rpl_mts_pending_events.inc File 4.91 KB 0644
rpl_mts_relay_log_recovery.test File 3.19 KB 0644
rpl_multi_query.test File 782 B 0644
rpl_multi_update.test File 805 B 0644
rpl_multi_update2.test File 1.35 KB 0644
rpl_multi_update3.test File 4.38 KB 0644
rpl_not_null.test File 10.7 KB 0644
rpl_parallel_load.test File 6.06 KB 0644
rpl_parallel_load_innodb.test File 6.96 KB 0644
rpl_partition.test File 7.88 KB 0644
rpl_record_compare.test File 2.08 KB 0644
rpl_relayrotate.test File 2.68 KB 0644
rpl_reset_slave.test File 3.45 KB 0644
rpl_rollback_to_savepoint.inc File 7.49 KB 0644
rpl_row_001.test File 1.92 KB 0644
rpl_row_UUID.test File 2.61 KB 0644
rpl_row_basic.test File 24.21 KB 0644
rpl_row_blob.test File 5.57 KB 0644
rpl_row_delayed_ins.test File 598 B 0644
rpl_row_empty_imgs.test File 5.67 KB 0644
rpl_row_event_max_size.inc File 3.76 KB 0644
rpl_row_func003.test File 3.07 KB 0644
rpl_row_idempotency.test File 8.39 KB 0644
rpl_row_img.test File 8.23 KB 0644
rpl_row_img_blobs.test File 5.82 KB 0644
rpl_row_img_diff_indexes.test File 9.11 KB 0644
rpl_row_show_relaylog_events.inc File 559 B 0644
rpl_row_sp002.test File 5.26 KB 0644
rpl_row_sp003.test File 2.01 KB 0644
rpl_row_sp006.test File 2.78 KB 0644
rpl_row_sp007.test File 1.46 KB 0644
rpl_row_tabledefs.test File 8.1 KB 0644
rpl_set_null.test File 2.85 KB 0644
rpl_show_binlog_events.inc File 364 B 0644
rpl_show_log_events_with_varying_options.inc File 364 B 0644
rpl_show_relaylog_events.inc File 1.96 KB 0644
rpl_start_stop_slave.test File 5.3 KB 0644
rpl_stm_EE_err2.test File 1.47 KB 0644
rpl_stm_create_if_not_exists.test File 6.87 KB 0644
rpl_stm_insert_delayed.inc File 394 B 0644
rpl_stm_mix_show_relaylog_events.inc File 574 B 0644
rpl_stop_middle_group.test File 5.14 KB 0644
rpl_stop_slave.test File 1.56 KB 0644
rpl_stress_test.inc File 2.22 KB 0644
rpl_sv_relay_space.test File 921 B 0644
rpl_temp_error.test File 623 B 0644
rpl_test_framework.inc File 2.42 KB 0644
rpl_tmp_table_and_DDL.test File 4.8 KB 0644
rpl_trig004.test File 1.7 KB 0644
rpl_truncate.test File 425 B 0644
rpl_truncate_helper.test File 976 B 0644
type_conversions.test File 23.47 KB 0644