[ Avaa Bypassed ]

################################################################################
# In this test case, we verify if some DDL statements implicitly commit a 
# transaction and are written directly to the binary log without going
# through either the Statement- or Transactional-Cache. 
#
# As any statement that goes through a cache is written to the binary log
# wrapped in a BEGIN...COMMIT, we proceed as follows:  
#
#  - create a transaction and insert some values into a transactional table.
#  - execute a DDL statement that is supposed to implicitly commit the previous
#  transaction. 
#  - Check in the binary log for a COMMIT mark which is supposed to be written
#  before the DDL statement.
#  - Check in the binary log if the DDL is not wrapped by a BEGIN..COMMIT. 
#
# For further details, please, read WL#2687 and WL#5072.
################################################################################

--echo #########################################################################
--echo #                            CONFIGURATION
--echo #########################################################################
connection master;

eval CREATE TABLE tt_1 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = $engine;
eval CREATE TABLE tt_2 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = $engine;
eval CREATE TABLE nt_1 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = MyIsam;

INSERT INTO tt_1(ddl_case) VALUES(0);
INSERT INTO tt_2(ddl_case) VALUES(0);

--echo #########################################################################
--echo #                          CHECK IMPLICT COMMIT
--echo #########################################################################
SET AUTOCOMMIT= 0;
let $ddl_cases= 43;
while ($ddl_cases >= 1)
{
  --echo -b-b-b-b-b-b-b-b-b-b-b- >> << -b-b-b-b-b-b-b-b-b-b-b-
  let $in_temporary= no;
  let $ok= yes;
  #
  # In SBR and MIXED modes, the commit event is usually the third event in the
  # binary log:
  #
  # 1: BEGIN
  # 2: INSERT
  # 3: COMMIT
  # 4: DDL EVENT which triggered the previous commmit.
  #
  if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
  {
    let $commit_event_row_number= 3;
  }
  #
  # In RBR mode, the commit event is usually the fourth event in the binary log:
  #
  # 1: BEGIN
  # 2: TABLE MAP EVENT
  # 3: ROW EVENT
  # 4: COMMIT
  # 5: DDL EVENT which triggered the previous commmit.
  #
  if (`select @@binlog_format = 'ROW'`)
  {
    let $commit_event_row_number= 4;
  }
  #
  # In NDB (RBR and MIXED modes), the commit event is usually the seventh event
  # in the binary log:
  #
  # 1: COMMAND
  # 2: BEGIN
  # 3: TABLE MAP EVENT
  # 4: TABLE MAP EVENT (ndb_apply_status)
  # 5: ROW EVENT
  # 6: ROW EVENT
  # 7: COMMIT
  #
  if ($engine == NDB)
  {
    let $commit_event_row_number= 7;
  }
  
  let $first_binlog_position= query_get_value("SHOW MASTER STATUS", Position, 1);
  --enable_query_log
  eval INSERT INTO tt_1(ddl_case) VALUES ($ddl_cases);

  if ($ddl_cases == 43)
  {
    let $cmd= CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "$UDF_EXAMPLE_LIB";
  }
  if ($ddl_cases == 42)
  {
    let $cmd= DROP FUNCTION myfunc_int;
  }
  if ($ddl_cases == 41)
  {
    let $cmd= LOAD INDEX INTO CACHE nt_1 IGNORE LEAVES;
    if ($engine == NDB)
    {
      # This seems to be related to epochs.
      # We need to check this against an updated version or avoid it.
      let $ok= no;
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 40)
  {
    let $cmd= LOAD INDEX INTO CACHE tt_1, tt_2 IGNORE LEAVES;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 39)
  {
    let $cmd= ANALYZE TABLE nt_1;
  }
  if ($ddl_cases == 38)
  {
    let $cmd= CHECK TABLE nt_1;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 37)
  {
    let $cmd= OPTIMIZE TABLE nt_1;
  }
  if ($ddl_cases == 36)
  {
    let $cmd= REPAIR TABLE nt_1;
  }
  if ($ddl_cases == 35)
  {
    let $cmd= LOCK TABLES tt_1 WRITE;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 34)
  {
    let $cmd= UNLOCK TABLES;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 33)
  {
    let $cmd= CREATE USER 'user'@'localhost';
  }
  if ($ddl_cases == 32)
  {
    let $cmd= GRANT ALL ON *.* TO 'user'@'localhost';
  }
  if ($ddl_cases == 31)
  {
    let $cmd= SET PASSWORD FOR 'user'@'localhost' = PASSWORD('newpass');
    #
    # In NDB (RBR mode), the commit event is the eleventh event
    # in the binary log:
    #
    # 1: DDL EVENT which triggered the previous commmit.
    # 2: BEGIN
    # 3: TABLE MAP EVENT
    # 4: ROW EVENT
    # 5: COMMIT
    # 6: BEGIN
    # 7: TABLE MAP EVENT
    # 8: TABLE MAP EVENT (ndb_apply_status)
    # 9: ROW EVENT
    # 10: ROW EVENT
    # 11: COMMIT
    #
    if (`SELECT '$engine' = 'NDB' && @@binlog_format = 'ROW'`)
    {
      let $commit_event_row_number= 11;
    }
    #
    # In NDB (MIXED mode), the commit event is the eighth event
    # in the binary log:
    #
    # 1: DDL EVENT which triggered the previous commmit.
    # 2: BEGIN
    # 3: TABLE MAP EVENT
    # 4: TABLE MAP EVENT (ndb_apply_status)
    # 5: ROW EVENT
    # 6: ROW EVENT
    # 7: COMMIT
    #
    if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'`)
    {
      let $commit_event_row_number= 7;
    }
  }
  if ($ddl_cases == 30)
  {
    let $cmd= REVOKE ALL PRIVILEGES, GRANT OPTION FROM 'user'@'localhost';
  }
  if ($ddl_cases == 29)
  {
    let $cmd= RENAME USER 'user'@'localhost' TO 'user_new'@'localhost';
  }
  if ($ddl_cases == 28)
  {
    let $cmd= DROP USER 'user_new'@'localhost';
  }
  if ($ddl_cases == 27)
  {
    let $cmd= CREATE EVENT evt ON SCHEDULE AT CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO SELECT * FROM tt_1;
  }
  if ($ddl_cases == 26)
  {
    let $cmd= ALTER EVENT evt COMMENT 'evt';
  }
  if ($ddl_cases == 25)
  {
    let $cmd= DROP EVENT evt;
  }
  if ($ddl_cases == 24)
  {
    let $cmd= CREATE TRIGGER tr AFTER INSERT ON tt_1 FOR EACH ROW UPDATE tt_2 SET ddl_case = ddl_case WHERE ddl_case= NEW.ddl_case;
  }
  if ($ddl_cases == 23)
  {
    let $cmd= DROP TRIGGER tr;
    #
    # In RBR mode, due to the trigger the tt_2 is also updated:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT
    # 4: ROW EVENT
    # 5: COMMIT
    # 6: DDL EVENT which triggered the previous commmit.
    #
    if (`select @@binlog_format = 'ROW' && '$engine' != 'NDB'`)
    {
      let $commit_event_row_number= 5;
    }
  }
  if ($ddl_cases == 22)
  {
    let $cmd= CREATE FUNCTION fc () RETURNS VARCHAR(64) RETURN "fc";
  }
  if ($ddl_cases == 21)
  {
    let $cmd= ALTER FUNCTION fc COMMENT 'fc';
  }
  if ($ddl_cases == 20)
  {
    let $cmd= DROP FUNCTION fc;
  }
  if ($ddl_cases == 19)
  {
    let $cmd= CREATE PROCEDURE pc () UPDATE tt_2 SET ddl_case = ddl_case WHERE ddl_case= NEW.ddl_case;
  }
  if ($ddl_cases == 18)
  {
    let $cmd= ALTER PROCEDURE pc COMMENT 'pc';
  }
  if ($ddl_cases == 17)
  {
    let $cmd= DROP PROCEDURE pc;
  }
  if ($ddl_cases == 16)
  {
    let $cmd= CREATE VIEW v AS SELECT * FROM tt_1;
  }
  if ($ddl_cases == 15)
  {
    let $cmd= ALTER VIEW v AS SELECT * FROM tt_1;
  }
  if ($ddl_cases == 14)
  {
    let $cmd= DROP VIEW v;
  }
  if ($ddl_cases == 13)
  {
    let $cmd= CREATE INDEX ix ON tt_1(ddl_case);
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    # 7: DDL EVENT which triggered the previous commmit.
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 12)
  {
    let $cmd= DROP INDEX ix ON tt_1;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    # 7: DDL EVENT which triggered the previous commmit.
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 11)
  {
    let $cmd= CREATE TEMPORARY TABLE tt_xx (a int);
    let $in_temporary= yes;
    # In SBR and MIXED modes, the DDL statement is written to the binary log but
    # does not commit the current transaction.
    #
    # 1: BEGIN
    # 2: CREATE TEMPORARY
    # 3: INSERT
    # 4: COMMIT
    #
    # In RBR the transaction is not committed either and the statement is not
    # written to the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: ROW EVENT
    # 4: COMMIT
    #
    if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'` )
    {
      let $commit_event_row_number= 4;
    }
    #
    # In NDB (RBR mode), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if (`SELECT '$engine' = 'NDB' && @@binlog_format = 'ROW'` )
    {
      let $commit_event_row_number= 6;
    }
    #
    # In NDB (MIXED mode), the commit event is the nineth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: DDL EVENT which triggered the previous commmit.
    # 3: COMMIT
    # 4: BEGIN
    # 5: TABLE MAP EVENT
    # 6: TABLE MAP EVENT (ndb_apply_status)
    # 7: ROW EVENT
    # 8: ROW EVENT
    # 9: COMMIT
    #
    if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'` )
    {
      let $commit_event_row_number= 9;
    }
  }
  if ($ddl_cases == 10)
  {
    let $cmd= ALTER TABLE tt_xx ADD COLUMN (b int);
    #
    # In MIXED mode, the changes are logged as rows and we have what follows:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: ROW EVENT
    # 4: COMMIT
    # 5: DDL EVENT which triggered the previous commmit.
    #
    if (`select @@binlog_format = 'MIXED'`)
    {
      let $commit_event_row_number= 4;
    }
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 9)
  {
    let $cmd= ALTER TABLE tt_xx RENAME new_tt_xx;
    #
    # In MIXED mode, the changes are logged as rows and we have what follows:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: ROW EVENT
    # 4: COMMIT
    # 5: DDL EVENT which triggered the previous commmit.
    #
    if (`select @@binlog_format = 'MIXED'`)
    {
      let $commit_event_row_number= 4;
    }
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 8)
  {
    let $cmd= DROP TEMPORARY TABLE IF EXISTS new_tt_xx;
    let $in_temporary= yes;
    #
    # In SBR and MIXED modes, the DDL statement is written to the binary log
    # but does not commit the current transaction:
    #
    # In SBR, we have what follows:
    #
    # 1: BEGIN
    # 2: INSERT
    # 3: DROP TEMPORARY
    # 4: COMMIT
    #
    # In RBR the transaction is not committed either and the statement is not
    # written to the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: ROW EVENT
    # 4: COMMIT
    #
    if (`select @@binlog_format = 'STATEMENT'`)
    {
      let $commit_event_row_number= 4;
    }
    # In MIXED mode, the changes are logged as rows and we have what follows:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: ROW EVENT
    # 4: DROP TEMPORARY table IF EXISTS
    # 5: COMMIT
    #
    if (`select @@binlog_format = 'MIXED' || @@binlog_format = 'ROW'`)
    {
      let $commit_event_row_number= 5;
    }
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: DROP TEMPORARY table IF EXISTS
    # 3: COMMIT
    # 4: BEGIN
    # 5: TABLE MAP EVENT
    # 6: TABLE MAP EVENT (ndb_apply_status)
    # 7: ROW EVENT
    # 8: ROW EVENT
    # 9: COMMIT
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 9;
    }
    #
    # In NDB (MIXED mode), the commit event is the nineth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: DDL EVENT which triggered the previous commmit.
    # 3: COMMIT
    # 4: BEGIN
    # 5: TABLE MAP EVENT
    # 6: TABLE MAP EVENT (ndb_apply_status)
    # 7: ROW EVENT
    # 8: ROW EVENT
    # 9: COMMIT
    #
    if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'` )
    {
      let $commit_event_row_number= 9;
    }
  }
  if ($ddl_cases == 7)
  {
    let $cmd= CREATE TABLE tt_xx (a int);
  }
  if ($ddl_cases == 6)
  {
    let $cmd= ALTER TABLE tt_xx ADD COLUMN (b int);
  }
  if ($ddl_cases == 5)
  {
    let $cmd= RENAME TABLE tt_xx TO new_tt_xx;
  }
  if ($ddl_cases == 4)
  {
    let $cmd= TRUNCATE TABLE new_tt_xx;
  }
  if ($ddl_cases == 3)
  {
    let $cmd= DROP TABLE IF EXISTS tt_xx, new_tt_xx;
  }
  if ($ddl_cases == 2)
  {
    let $cmd= CREATE DATABASE db;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    # 7: DDL EVENT which triggered the previous commmit.
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  if ($ddl_cases == 1)
  {
    let $cmd= DROP DATABASE IF EXISTS db;
    #
    # In NDB (RBR and MIXED modes), the commit event is the sixth event
    # in the binary log:
    #
    # 1: BEGIN
    # 2: TABLE MAP EVENT
    # 3: TABLE MAP EVENT (ndb_apply_status)
    # 4: ROW EVENT
    # 5: ROW EVENT
    # 6: COMMIT
    # 7: DDL EVENT which triggered the previous commmit.
    #
    if ($engine == NDB)
    {
      let $commit_event_row_number= 6;
    }
  }
  --replace_result $UDF_EXAMPLE_LIB UDF_EXAMPLE_LIB
  --eval $cmd
  --disable_query_log
  #
  # When a temporary table is either created or dropped, there is no implicit
  # commit. The flag in_temporary is used to avoid aborting the test in such
  # cases. Thus we force the commit.
  #
  if ($in_temporary == yes)
  {
    --eval COMMIT
  }
  let $event_commit= query_get_value("SHOW BINLOG EVENTS FROM $first_binlog_position", Info, $commit_event_row_number);
  if (`SELECT SUBSTRING("$event_commit",1,6) != "COMMIT"`)
  {
    if ($ok == yes)
    {
      --echo it *does not* commit the current transaction.
      --echo $cmd
      --echo $event_commit
      SHOW BINLOG EVENTS;
      exit;
    }
  }

  --echo -e-e-e-e-e-e-e-e-e-e-e- >> << -e-e-e-e-e-e-e-e-e-e-e-
  let $binlog_start= $first_binlog_position;
  --echo -b-b-b-b-b-b-b-b-b-b-b- >> << -b-b-b-b-b-b-b-b-b-b-b-
  --source include/show_binlog_events.inc
  --echo -e-e-e-e-e-e-e-e-e-e-e- >> << -e-e-e-e-e-e-e-e-e-e-e-
  --echo
  dec $ddl_cases;
}
SET AUTOCOMMIT= 1;

--echo ###################################################################################
--echo #                               CHECK CONSISTENCY
--echo ###################################################################################
--source include/sync_slave_sql_with_master.inc

--let $diff_tables= master:tt_1,slave:tt_1
--source include/diff_tables.inc

--echo ###################################################################################
--echo #                                        CLEAN
--echo ###################################################################################
connection master;

DROP TABLE tt_1;
DROP TABLE tt_2;
DROP TABLE nt_1;

--source include/sync_slave_sql_with_master.inc