[ Avaa Bypassed ]

# ==== Purpose ====
#
# Test all conditions related to GTID_MODE:
#
# Items marked with '-' are implemented, items marked with 'x' are todo.
#
#   With GTID_MODE = ON:
#    - fail on SET GTID_NEXT = 'ANONYMOUS'
#    - CHANGE MASTER TO MASTER_AUTO_POSITION = 1 is allowed.
#    - GTIDs should be written to binlog
#    x SQL thread fails when reading anonymous Gtid_log_event.
#    x SQL thread fails if relay log does not have Previous_gtids_log_event.
#    x Dump thread fails if binlog does not have Previous_gtids_log_event.
#    x Dump thread fails when reading anonymous Gtid_log_event.
#    x IO thread fails when reading anonymous Gtid_log_event or transaction
#      that does not begin with Gtid_log_event.
#    x IO thread converts Previous_gtids_log_event to Rotate_log_event.
#
#   With GTID_MODE = OFF:
#    - fail on SET GTID_NEXT = 'SID:GNO'
#    - fail on CHANGE MASTER TO MASTER_AUTO_POSITION = 1
#    - GTIDs should not be written to binlog
#    x SQL thread fails when reading Gtid_log_event that contains SID:GNO.
#    x SQL thread understands anonymous Gtid_log_event.
#    x SQL thread does not fail when reading Previous_gtids_log_event.
#    x Dump thread fails when reading Gtid_log_event or Previous_gtid_log_event.
#    x IO thread fails when reading Gtid_log_event.
#    x IO thread converts Previous_gtids_log_event to Rotate_log_event.
#    - Server fails to start if there are Previous_gtids_log_events or
#    Gtid_log_events in the binary or relay log.
#    - If Server finds AUTO_POSITION= 1 in master info file, it forcefully
#    resets to 0 as the server is started with GTID_MODE= OFF.
#
#   Option values and combinations:
#    - Default is GTID_MODE = OFF
#    - GTID_MODE is read-only.
#    - GTID_MODE cannot (yet) be set to UPGRADE_STEP_1 or UPGRADE_STEP_2
#    - GTID_MODE=ON requires all of --log-bin, --log-slave-updates,
#      and --enforce-gtid-consistency.
#
#   Master and slave:
#    - START SLAVE fails if master has GTID_MODE = ON and slave has
#      GTID_MODE = OFF.
#    - START SLAVE fails if master has GTID_MODE = OFF and slave has
#      GTID_MODE = ON.
#
# ==== References ====
#
# Added in WL#3584 - Global Transaction Identifiers
--source include/not_windows.inc
--source include/not_gtid_enabled.inc
--disable_warnings
--source include/master-slave.inc
--enable_warnings

--let $uuida= aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa

call mtr.add_suppression("Slave I/O: The slave IO thread stops because the master has @@GLOBAL.GTID_MODE");
call mtr.add_suppression("Error reading packet from server: Lost connection to MySQL");
call mtr.add_suppression("Aborting");
call mtr.add_suppression(".* Found a Gtid_log_event or Previous_gtids_log_event when @@GLOBAL.GTID_MODE = OFF.");
call mtr.add_suppression("MASTER_AUTO_POSITION in the master info file was 1 but server is started with @@GLOBAL.GTID_MODE = OFF. Forcing MASTER_AUTO_POSITION to 0.");

--source include/sync_slave_sql_with_master.inc
--source include/stop_slave.inc

--connection master


--echo ==== Master and slave have GTID_MODE = OFF ====

--echo ---- Default value for GTID_MODE ----

--let $assert_text= Default value for GTID_MODE should be OFF
--let $assert_cond= "[SELECT @@GTID_MODE]" = "OFF"
--source include/assert.inc

--echo ---- GTID_MODE is read-only ----

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = OFF;

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = UPGRADE_STEP_1;

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = UPGRADE_STEP_2;

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = OFF_PERMISSIVE;

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = ON_PERMISSIVE;

--error ER_INCORRECT_GLOBAL_LOCAL_VAR
SET GTID_MODE = ON;

--let $assert_text= GTID_MODE should still be OFF after failing to change GTID_MODE
--let $assert_cond= "[SELECT @@GTID_MODE]" = "OFF"

--echo ---- GTID_NEXT must be ANONYMOUS or AUTOMATIC ----

# should not generate error
SET GTID_NEXT = 'AUTOMATIC';

# should not generate error
SET GTID_NEXT = 'ANONYMOUS';

# should generate error
--error ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF
eval SET GTID_NEXT = '$uuida:1';

--echo ---- CHANGE MASTER TO MASTER_AUTO_POSITION not supported ----

--connection slave

# should generate error
--error ER_AUTO_POSITION_REQUIRES_GTID_MODE_ON
CHANGE MASTER TO MASTER_AUTO_POSITION = 1;

# No error
CHANGE MASTER TO MASTER_AUTO_POSITION = 0;

--echo ---- No GTIDs in binlog ----

--disable_warnings
--source include/start_slave.inc
--enable_warnings
--connection master

SET GTID_NEXT = 'AUTOMATIC';
CREATE TABLE t1 (a INT) ENGINE = InnoDB;
SET GTID_NEXT = 'ANONYMOUS';
INSERT INTO t1 VALUES (1);

--let $binlog_file= LAST
--let $binlog_limit= 1
--let $keep_gtid_events= 1
--source include/show_binlog_events.inc

--source include/sync_slave_sql_with_master.inc
--source include/show_binlog_events.inc
--source include/show_relaylog_events.inc

--echo ==== Checks performed at server start when GTID_MODE = ON ====

--connection master
--let $saved_innodb_page_size_server1=`SELECT @@innodb_page_size`
--connection slave
--let $saved_innodb_page_size_server2=`SELECT @@innodb_page_size`
--connection master
--let $rpl_server_number= 2
--source include/rpl_stop_server.inc

--let $server1_cmd= $MYSQLD --defaults-group-suffix=.1 --defaults-file=$MYSQLTEST_VARDIR/my.cnf --log-output=file --default-storage-engine=InnoDB --default-tmp-storage-engine=InnoDB --innodb-page-size=$saved_innodb_page_size_server1

--let $server2_cmd= $MYSQLD --defaults-group-suffix=.2 --defaults-file=$MYSQLTEST_VARDIR/my.cnf --log-output=file --default-storage-engine=InnoDB --default-tmp-storage-engine=InnoDB --innodb-page-size=$saved_innodb_page_size_server2

--let $assert_status= 1

--echo ---- GTID_MODE = UPGRADE_STEP_[1|2] not supported ----

--let $assert_regex= --gtid-mode=UPGRADE_STEP_1 or --gtid-mode=UPGRADE_STEP_2 are not yet supported

--let $assert_command= $server2_cmd --gtid-mode=upgrade_step_1 --enforce-gtid-consistency 2>&1
--source include/assert_command_output.inc

--let $assert_command= $server2_cmd --gtid-mode=upgrade_step_2 --enforce-gtid-consistency 2>&1
--source include/assert_command_output.inc

--echo ---- GTID_MODE=ON requires --enforce-gtid-consistency ----

--let $assert_regex= --gtid-mode=ON or UPGRADE_STEP_1 requires --enforce-gtid-consistency
--let $assert_command= $server2_cmd --gtid-mode=on 2>&1
--source include/assert_command_output.inc

--echo ==== Master has GTID_MODE = OFF, slave has GTID_MODE = ON ====

--let $rpl_server_number= 2
--let $rpl_start_with_gtids= 1
--source include/rpl_start_server.inc

--echo ---- Slave can't connect ----
--connection slave
--disable_warnings
START SLAVE;
--enable_warnings
--let $slave_io_errno= 1593 # ER_SLAVE_FATAL_ERROR
--source include/wait_for_slave_io_error.inc
--source include/stop_slave_sql.inc

--echo ==== Master and slave have GTID_MODE = ON ====

--connection slave
--let $rpl_server_number= 1
--source include/rpl_stop_server.inc

--echo ---- GTID_MODE = ON requires --log-bin --log-slave-updates ----

# This test has to be performed on the master because the slave is
# automatically running with both options on.

--let $assert_regex= --gtid-mode=ON or UPGRADE_STEP_1 or UPGRADE_STEP_2 requires --log-bin and --log-slave-updates
--let $assert_command= $server1_cmd --gtid-mode=on --enforce-gtid-consistency 2>&1
--source include/assert_command_output.inc

--let $rpl_server_number= 1
--source include/rpl_start_server.inc
--disable_warnings
--source include/start_slave.inc
--enable_warnings

--connection master

--let $assert_text= GTID_MODE should be ON now.
--let $assert_cond= "[SELECT @@GLOBAL.GTID_MODE]" = "ON"
--source include/assert.inc

--echo ---- GTID_NEXT must be SID:GNO or AUTOMATIC -----

# should not generate error
SET GTID_NEXT = 'AUTOMATIC';

# should not generate error
eval SET GTID_NEXT = '$uuida:1';

# should generate error
--error ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON
SET GTID_NEXT = 'ANONYMOUS';
ROLLBACK;

#
# Show that setting the same GTID twice raises an error the second time
#
SET SESSION GTID_NEXT='7805be8e-51ab-11e1-bacc-6706c20ad7ba:1';
--error ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID
SET SESSION GTID_NEXT='7805be8e-51ab-11e1-bacc-6706c20ad7ba:1';
ROLLBACK;

#
# Show that connection close releases GTID_NEXT
#
connect (master_gtid,127.0.0.1,root,,test,$MASTER_MYPORT);
--connection master_gtid
SET SESSION GTID_NEXT='7805be8e-51ab-11e1-bacc-6706c20ad7ba:1';
disconnect master_gtid;
--connection master
SET SESSION GTID_NEXT='7805be8e-51ab-11e1-bacc-6706c20ad7ba:1';
ROLLBACK;

--echo ---- GTIDs are in binlog ----

SET GTID_NEXT = 'AUTOMATIC';
INSERT INTO t1 VALUES (2);

--let $binlog_file= LAST
--let $binlog_limit= 1
--let $keep_gtid_events= 1
--source include/show_binlog_events.inc

--source include/sync_slave_sql_with_master.inc
--source include/show_binlog_events.inc
--source include/show_relaylog_events.inc

--echo ---- CHANGE MASTER TO MASTER_AUTO_POSITION = 1 works ----

--source include/stop_slave.inc
CHANGE MASTER TO MASTER_AUTO_POSITION = 1;
--disable_warnings
--source include/start_slave.inc
--enable_warnings

--connection master
INSERT INTO t1 VALUES (3);
--source include/sync_slave_sql_with_master.inc

--let $datadir= `SELECT @@datadir`
--source include/stop_slave.inc

--echo ==== Checks performed at server start when GTID_MODE = OFF ====

--let $rpl_server_number= 2
--source include/rpl_stop_server.inc
--echo ---- Fail to start replication with GTID_MODE = OFF and GTIDs in binlog/relay log ----
--let $rpl_server_number= 2
--let $rpl_start_with_gtids= 0
--source include/rpl_start_server.inc
START SLAVE;
--let $rpl_server_number= 2
--let $rpl_skip_start_slave= 1
--let $rpl_start_with_gtids= 1
--source include/rpl_restart_server.inc
--connection slave
RESET SLAVE;
RESET MASTER;

--echo ==== Master has GTID_MODE = ON, slave has GTID_MODE = OFF ====

--connection master
--source include/rpl_stop_server.inc
--remove_file $datadir/slave-bin.000001
--remove_file $datadir/slave-bin.index
--remove_file $datadir/slave-relay-bin.000001
--remove_file $datadir/slave-relay-bin.index

--let $rpl_server_number= 2
--let $rpl_start_with_gtids= 0
--let $rpl_skip_start_slave= 1
--let $rpl_server_parameters= --log-slave-updates
--source include/rpl_start_server.inc

--let $file= query_get_value(SHOW MASTER STATUS, File, 1)
--let $pos= query_get_value(SHOW MASTER STATUS, Position, 1)
--connection slave
--replace_result $SERVER_MYPORT_1 PORT $file FILE $pos POS
--replace_column 2 ####
eval CHANGE MASTER TO MASTER_HOST = '127.0.0.1', MASTER_PORT = $SERVER_MYPORT_1, MASTER_USER = 'root', MASTER_LOG_FILE = '$file', MASTER_LOG_POS = $pos, MASTER_CONNECT_RETRY = 1;

--echo ---- Slave can't connect ----

--connection slave
--disable_warnings
START SLAVE;
--enable_warnings
--let $slave_io_errno= 1593 # ER_SLAVE_FATAL_ERROR
--source include/wait_for_slave_io_error.inc
--source include/stop_slave_sql.inc
RESET SLAVE;

--let $rpl_only_running_threads= 1
--source include/rpl_end.inc