[ Avaa Bypassed ]

#
# Test of alter table
#
--disable_warnings
drop table if exists t1,t2;
drop database if exists mysqltest;
--enable_warnings

create table t1 (
col1 int not null auto_increment primary key,
col2 varchar(30) not null,
col3 varchar (20) not null,
col4 varchar(4) not null,
col5 enum('PENDING', 'ACTIVE', 'DISABLED') not null,
col6 int not null, to_be_deleted int);
insert into t1 values (2,4,3,5,"PENDING",1,7);
alter table t1
add column col4_5 varchar(20) not null after col4,
add column col7 varchar(30) not null after col5,
add column col8 datetime not null, drop column to_be_deleted,
change column col2 fourth varchar(30) not null after col3,
modify column col6 int not null first;
select * from t1;
drop table t1;

create table t1 (bandID MEDIUMINT UNSIGNED NOT NULL PRIMARY KEY, payoutID SMALLINT UNSIGNED NOT NULL);
insert into t1 (bandID,payoutID) VALUES (1,6),(2,6),(3,4),(4,9),(5,10),(6,1),(7,12),(8,12);
alter table t1 add column new_col int, order by payoutid,bandid;
select * from t1;
alter table t1 order by bandid,payoutid;
select * from t1;
drop table t1;

# Check that pack_keys and dynamic length rows are not forced. 

CREATE TABLE t1 (
GROUP_ID int(10) unsigned DEFAULT '0' NOT NULL,
LANG_ID smallint(5) unsigned DEFAULT '0' NOT NULL,
NAME varchar(80) DEFAULT '' NOT NULL,
PRIMARY KEY (GROUP_ID,LANG_ID),
KEY NAME (NAME));
#show table status like "t1";
ALTER TABLE t1 CHANGE NAME NAME CHAR(80) not null;
--replace_column 8 #
SHOW FULL COLUMNS FROM t1;
DROP TABLE t1;

#
# Test of ALTER TABLE ... ORDER BY
#

create table t1 (n int);
insert into t1 values(9),(3),(12),(10);
alter table t1 order by n;
select * from t1;
drop table t1;

CREATE TABLE t1 (
  id int(11) unsigned NOT NULL default '0',
  category_id tinyint(4) unsigned NOT NULL default '0',
  type_id tinyint(4) unsigned NOT NULL default '0',
  body text NOT NULL,
  user_id int(11) unsigned NOT NULL default '0',
  status enum('new','old') NOT NULL default 'new',
  PRIMARY KEY (id)
) ENGINE=MyISAM;

ALTER TABLE t1 ORDER BY t1.id, t1.status, t1.type_id, t1.user_id, t1.body;
DROP TABLE t1;

#
# The following combination found a hang-bug in MyISAM
#

CREATE TABLE t1 (AnamneseId int(10) unsigned NOT NULL auto_increment,B BLOB,PRIMARY KEY (AnamneseId)) engine=myisam;
insert into t1 values (null,"hello");
LOCK TABLES t1 WRITE;
ALTER TABLE t1 ADD Column new_col int not null;
UNLOCK TABLES;
OPTIMIZE TABLE t1;
DROP TABLE t1;

#
# Drop and add an auto_increment column
#

create table t1 (i int unsigned not null auto_increment primary key);
insert into t1 values (null),(null),(null),(null);
alter table t1 drop i,add i int unsigned not null auto_increment, drop primary key, add primary key (i);
select * from t1;
drop table t1;

#
# Bug #2628: 'alter table t1 rename mysqltest.t1' silently drops mysqltest.t1 
# if it exists
#
create table t1 (name char(15));
insert into t1 (name) values ("current");
create database mysqltest;
create table mysqltest.t1 (name char(15));
insert into mysqltest.t1 (name) values ("mysqltest");
select * from t1;
select * from mysqltest.t1;
--error ER_TABLE_EXISTS_ERROR
alter table t1 rename mysqltest.t1;
select * from t1;
select * from mysqltest.t1;
drop table t1;
drop database mysqltest;

#
# ALTER TABLE ... ENABLE/DISABLE KEYS

create table t1 (n1 int not null, n2 int, n3 int, n4 float,
                unique(n1),
                key (n1, n2, n3, n4),
                key (n2, n3, n4, n1),
                key (n3, n4, n1, n2),
                key (n4, n1, n2, n3) );
alter table t1 disable keys;
show keys from t1;
#let $1=10000;
let $1=10;
while ($1)
{
 eval insert into t1 values($1,RAND()*1000,RAND()*1000,RAND());
 dec $1;
}
alter table t1 enable keys;
show keys from t1;
drop table t1;

#
# Alter table and rename
#

create table t1 (i int unsigned not null auto_increment primary key);
alter table t1 rename t2;
alter table t2 rename t1, add c char(10) comment "no comment";
show columns from t1;
drop table t1;

# implicit analyze

create table t1 (a int, b int);
let $1=100;
while ($1)
{
 eval insert into t1 values(1,$1), (2,$1), (3, $1);
 dec $1;
}
alter table t1 add unique (a,b), add key (b);
show keys from t1;
analyze table t1;
show keys from t1;
drop table t1;

#
# Test of ALTER TABLE DELAYED
#

CREATE TABLE t1 (i int(10), index(i) );
ALTER TABLE t1 DISABLE KEYS;
INSERT DELAYED INTO t1 VALUES(1),(2),(3);
ALTER TABLE t1 ENABLE KEYS;
drop table t1;

#
# Test ALTER TABLE ENABLE/DISABLE keys when things are locked
#

CREATE TABLE t1 (
  Host varchar(16) binary NOT NULL default '',
  User varchar(16) binary NOT NULL default '',
  PRIMARY KEY  (Host,User)
) ENGINE=MyISAM;

ALTER TABLE t1 DISABLE KEYS;
LOCK TABLES t1 WRITE;
INSERT INTO t1 VALUES ('localhost','root'),('localhost',''),('games','monty');
SHOW INDEX FROM t1;
ALTER TABLE t1 ENABLE KEYS;
UNLOCK TABLES;
CHECK TABLES t1;
DROP TABLE t1;

#
# Test with two keys
#

CREATE TABLE t1 (
  Host varchar(16) binary NOT NULL default '',
  User varchar(16) binary NOT NULL default '',
  PRIMARY KEY  (Host,User),
  KEY  (Host)
) ENGINE=MyISAM;

ALTER TABLE t1 DISABLE KEYS;
SHOW INDEX FROM t1;
LOCK TABLES t1 WRITE;
INSERT INTO t1 VALUES ('localhost','root'),('localhost','');
SHOW INDEX FROM t1;
ALTER TABLE t1 ENABLE KEYS;
SHOW INDEX FROM t1;
UNLOCK TABLES;
CHECK TABLES t1;

# Test RENAME with LOCK TABLES
LOCK TABLES t1 WRITE;
ALTER TABLE t1 RENAME t2;
UNLOCK TABLES;
select * from t2;
DROP TABLE t2;

#
# Test disable keys with locking
#
CREATE TABLE t1 (
  Host varchar(16) binary NOT NULL default '',
  User varchar(16) binary NOT NULL default '',
  PRIMARY KEY  (Host,User),
  KEY  (Host)
) ENGINE=MyISAM;

LOCK TABLES t1 WRITE;
ALTER TABLE t1 DISABLE KEYS;
SHOW INDEX FROM t1;
DROP TABLE t1;

#
# BUG#4717 - check for valid table names
#
create table t1 (a int);
--error ER_WRONG_TABLE_NAME
alter table t1 rename to ``;
--error ER_WRONG_TABLE_NAME
rename table t1 to ``;
drop table t1;

#
# BUG#6236 - ALTER TABLE MODIFY should set implicit NOT NULL on PK columns
#
drop table if exists t1, t2;
create table t1 ( a varchar(10) not null primary key ) engine=myisam;
create table t2 ( a varchar(10) not null primary key ) engine=merge union=(t1);
flush tables;
alter table t1 modify a varchar(10);
show create table t2;
flush tables;
alter table t1 modify a varchar(10) not null;
show create table t2;
drop table if exists t1, t2;

# The following is also part of bug #6236 (CREATE TABLE didn't properly count
# not null columns for primary keys)

create table t1 (a int, b int, c int, d int, e int, f int, g int, h int,i int, primary key (a,b,c,d,e,f,g,i,h)) engine=MyISAM;
insert into t1 (a) values(1);
--replace_column 7 X 8 X 9 X 10 X 11 X 12 X 13 X 14 X
show table status like 't1';
alter table t1 modify a int;
--replace_column 7 X 8 X 9 X 10 X 11 X 12 X 13 X 14 X
show table status like 't1';
drop table t1;
create table t1 (a int not null, b int not null, c int not null, d int not null, e int not null, f int not null, g int not null, h int not null,i int not null, primary key (a,b,c,d,e,f,g,i,h)) engine=MyISAM;
insert into t1 (a) values(1);
--replace_column 7 X 8 X 9 X 10 X 11 X 12 X 13 X 14 X
show table status like 't1';
drop table t1;

#
# Test that data get converted when character set is changed
# Test that data doesn't get converted when src or dst is BINARY/BLOB
#
set names koi8r;
create table t1 (a char(10) character set koi8r);
insert into t1 values ('����');
select a,hex(a) from t1;
alter table t1 change a a char(10) character set cp1251;
select a,hex(a) from t1;
alter table t1 change a a binary(4);
select a,hex(a) from t1;
alter table t1 change a a char(10) character set cp1251;
select a,hex(a) from t1;
alter table t1 change a a char(10) character set koi8r;
select a,hex(a) from t1;
alter table t1 change a a varchar(10) character set cp1251;
select a,hex(a) from t1;
alter table t1 change a a char(10) character set koi8r;
select a,hex(a) from t1;
alter table t1 change a a text character set cp1251;
select a,hex(a) from t1;
alter table t1 change a a char(10) character set koi8r;
select a,hex(a) from t1;
delete from t1;

#
# Test ALTER TABLE .. CHARACTER SET ..
#
show create table t1;
alter table t1 DEFAULT CHARACTER SET latin1;
show create table t1;
alter table t1 CONVERT TO CHARACTER SET latin1;
show create table t1;
alter table t1 DEFAULT CHARACTER SET cp1251;
show create table t1;

drop table t1;

#
# Bug#2821
# Test that table CHARACTER SET does not affect blobs
#
create table t1 (myblob longblob,mytext longtext) 
default charset latin1 collate latin1_general_cs;
show create table t1;
alter table t1 character set latin2;
show create table t1;
drop table t1;

#
# Bug 2361 (Don't drop UNIQUE with DROP PRIMARY KEY)
#

CREATE TABLE t1 (a int PRIMARY KEY, b INT UNIQUE);
ALTER TABLE t1 DROP PRIMARY KEY;
SHOW CREATE TABLE t1;
--error ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t1 DROP PRIMARY KEY;
DROP TABLE t1;

# BUG#3899
create table t1 (a int, b int, key(a));
insert into t1 values (1,1), (2,2);
--error ER_CANT_DROP_FIELD_OR_KEY
alter table t1 drop key no_such_key;
alter table t1 drop key a;
drop table t1;

#
# BUG 12207 alter table ... discard table space on MyISAM table causes ERROR 2013 (HY000)
#
# Some platforms (Mac OS X, Windows) will send the error message using small letters.
CREATE TABLE T12207(a int) ENGINE=MYISAM;
--replace_result t12207 T12207
--error ER_ILLEGAL_HA
ALTER TABLE T12207 DISCARD TABLESPACE;
DROP TABLE T12207;

#
# Bug #6479  ALTER TABLE ... changing charset fails for TEXT columns
#
# The column's character set was changed but the actual data was not
# modified. In other words, the values were reinterpreted
# as UTF8 instead of being converted.
create table t1 (a text) character set koi8r;
insert into t1 values (_koi8r'����');
select hex(a) from t1;
alter table t1 convert to character set cp1251;
select hex(a) from t1;
drop table t1;

#
# Test for bug #7884 "Able to add invalid unique index on TIMESTAMP prefix"
# MySQL should not think that packed field with non-zero decimals is
# geometry field and allow to create prefix index which is
# shorter than packed field length.
#
create table t1 ( a timestamp );
--error ER_WRONG_SUB_KEY
alter table t1 add unique ( a(1) );
drop table t1;

#
# Bug #24395: ALTER TABLE DISABLE KEYS doesn't work when modifying the table
#
# This problem happens if the data change is compatible.
# Changing to the same type is compatible for example.
#
--disable_warnings
drop table if exists t1;
--enable_warnings
create table t1 (a int, key(a));
show indexes from t1;
--echo "this used not to disable the index"
alter table t1 modify a int, disable keys;
show indexes from t1;

alter table t1 enable keys;
show indexes from t1;

alter table t1 modify a bigint, disable keys;
show indexes from t1;

alter table t1 enable keys;
show indexes from t1;

alter table t1 add b char(10), disable keys;
show indexes from t1;

alter table t1 add c decimal(10,2), enable keys;
show indexes from t1;

--echo "this however did"
alter table t1 disable keys;
show indexes from t1;

desc t1;

alter table t1 add d decimal(15,5);
--echo "The key should still be disabled"
show indexes from t1;

drop table t1;

--echo "Now will test with one unique index"
create table t1(a int, b char(10), unique(a));
show indexes from t1;
alter table t1 disable keys;
show indexes from t1;
alter table t1 enable keys;

--echo "If no copy on noop change, this won't touch the data file"
--echo "Unique index, no change"
alter table t1 modify a int, disable keys;
show indexes from t1;

--echo "Change the type implying data copy"
--echo "Unique index, no change"
alter table t1 modify a bigint, disable keys;
show indexes from t1;

alter table t1 modify a bigint;
show indexes from t1;

alter table t1 modify a int;
show indexes from t1;

drop table t1;

--echo "Now will test with one unique and one non-unique index"
create table t1(a int, b char(10), unique(a), key(b));
show indexes from t1;
alter table t1 disable keys;
show indexes from t1;
alter table t1 enable keys;


--echo "If no copy on noop change, this won't touch the data file"
--echo "The non-unique index will be disabled"
alter table t1 modify a int, disable keys;
show indexes from t1;
alter table t1 enable keys;
show indexes from t1;

--echo "Change the type implying data copy"
--echo "The non-unique index will be disabled"
alter table t1 modify a bigint, disable keys;
show indexes from t1;

--echo "Change again the type, but leave the indexes as_is"
alter table t1 modify a int;
show indexes from t1;
--echo "Try the same. When data is no copied on similar tables, this is noop"
alter table t1 modify a int;
show indexes from t1;

drop table t1;


#
# Bug#11493 - Alter table rename to default database does not work without
#             db name qualifying
#
create database mysqltest;
create table t1 (c1 int);
# Move table to other database.
alter table t1 rename mysqltest.t1;
# Assure that it has moved.
--error ER_BAD_TABLE_ERROR
drop table t1;
# Move table back.
alter table mysqltest.t1 rename t1;
# Assure that it is back.
drop table t1;
# Now test for correct message if no database is selected.
# Create t1 in 'test'.
create table t1 (c1 int);
# Change to other db.
use mysqltest;
# Drop the current db. This de-selects any db.
drop database mysqltest;
# Now test for correct message.
--error ER_NO_DB_ERROR
alter table test.t1 rename t1;
# Check that explicit qualifying works even with no selected db.
alter table test.t1 rename test.t1;
# Go back to standard 'test' db.
use test;
drop table t1;

#
# BUG#23404 - ROW_FORMAT=FIXED option is lost is an index is added to the
# table
#
CREATE TABLE t1(a INT) ROW_FORMAT=FIXED;
CREATE INDEX i1 ON t1(a);
SHOW CREATE TABLE t1;
DROP INDEX i1 ON t1;
SHOW CREATE TABLE t1;
DROP TABLE t1;

#
# Bug#24219 - ALTER TABLE ... RENAME TO ... , DISABLE KEYS leads to crash
#
--disable_warnings
DROP TABLE IF EXISTS bug24219;
DROP TABLE IF EXISTS bug24219_2;
--enable_warnings

CREATE TABLE bug24219 (a INT, INDEX(a));

SHOW INDEX FROM bug24219;

ALTER TABLE bug24219 RENAME TO bug24219_2, DISABLE KEYS;

SHOW INDEX FROM bug24219_2;

DROP TABLE bug24219_2;

#
# Bug#24562 (ALTER TABLE ... ORDER BY ... with complex expression asserts)
#

--disable_warnings
drop table if exists table_24562;
--enable_warnings

create table table_24562(
  section int,
  subsection int,
  title varchar(50));

insert into table_24562 values
(1, 0, "Introduction"),
(1, 1, "Authors"),
(1, 2, "Acknowledgements"),
(2, 0, "Basics"),
(2, 1, "Syntax"),
(2, 2, "Client"),
(2, 3, "Server"),
(3, 0, "Intermediate"),
(3, 1, "Complex queries"),
(3, 2, "Stored Procedures"),
(3, 3, "Stored Functions"),
(4, 0, "Advanced"),
(4, 1, "Replication"),
(4, 2, "Load balancing"),
(4, 3, "High availability"),
(5, 0, "Conclusion");

select * from table_24562;

alter table table_24562 add column reviewer varchar(20),
order by title;

select * from table_24562;

update table_24562 set reviewer="Me" where section=2;
update table_24562 set reviewer="You" where section=3;

alter table table_24562
order by section ASC, subsection DESC;

select * from table_24562;

alter table table_24562
order by table_24562.subsection ASC, table_24562.section DESC;

select * from table_24562;

--error ER_PARSE_ERROR
alter table table_24562 order by 12;
--error ER_PARSE_ERROR
alter table table_24562 order by (section + 12);
--error ER_PARSE_ERROR
alter table table_24562 order by length(title);
--error ER_PARSE_ERROR
alter table table_24562 order by (select 12 from dual);

--error ER_BAD_FIELD_ERROR
alter table table_24562 order by no_such_col;

drop table table_24562;

# End of 4.1 tests

#
# Bug #14693 (ALTER SET DEFAULT doesn't work)
#

create table t1 (mycol int(10) not null);
alter table t1 alter column mycol set default 0;
desc t1;
drop table t1;

#
# Bug#25262 Auto Increment lost when changing Engine type
#

create table t1(id int(8) primary key auto_increment) engine=heap;

insert into t1 values (null);
insert into t1 values (null);

select * from t1;

# Set auto increment to 50
alter table t1 auto_increment = 50;

# Alter to myisam
alter table t1 engine = myisam;

# This insert should get id 50
insert into t1 values (null);
select * from t1;

# Alter to heap again
alter table t1 engine = heap;
insert into t1 values (null);
select * from t1;

drop table t1;

#
# Bug#27507: Wrong DATETIME value was allowed by ALTER TABLE in the
#            NO_ZERO_DATE mode.
#
set @orig_sql_mode = @@sql_mode;
set sql_mode="no_zero_date";
create table t1(f1 int);
alter table t1 add column f2 datetime not null, add column f21 date not null;
insert into t1 values(1,'2000-01-01','2000-01-01');
--error 1292
alter table t1 add column f3 datetime not null;
--error 1292
alter table t1 add column f3 date not null;
--error 1292
alter table t1 add column f4 datetime not null default '2002-02-02',
  add column f41 date not null;
alter table t1 add column f4 datetime not null default '2002-02-02',
  add column f41 date not null default '2002-02-02';
select * from t1;
drop table t1;
set sql_mode= @orig_sql_mode;

#
# Some additional tests for new, faster alter table.  Note that most of the
# whole alter table code is being tested all around the test suite already.
#

create table t1 (v varchar(32));
insert into t1 values ('def'),('abc'),('hij'),('3r4f');
select * from t1;
# Fast alter, no copy performed
alter table t1 change v v2 varchar(32);
select * from t1;
# Fast alter, no copy performed
alter table t1 change v2 v varchar(64);
select * from t1;
update t1 set v = 'lmn' where v = 'hij';
select * from t1;
# Regular alter table
alter table t1 add i int auto_increment not null primary key first;
select * from t1;
update t1 set i=5 where i=3;
select * from t1;
alter table t1 change i i bigint;
select * from t1;
alter table t1 add unique key (i, v);
select * from t1 where i between 2 and 4 and v in ('def','3r4f','lmn');
drop table t1;

#
# Bug#6073 "ALTER table minor glich": ALTER TABLE complains that an index
# without # prefix is not allowed for TEXT columns, while index
# is defined with prefix.
# 
create table t1 (t varchar(255) default null, key t (t(80)))
engine=myisam default charset=latin1;
alter table t1 change t t text;
drop table t1;

#
# Bug #26794: Adding an index with a prefix on a SPATIAL type breaks ALTER
# TABLE
#
CREATE TABLE t1 (a varchar(500));

ALTER TABLE t1 ADD b GEOMETRY NOT NULL, ADD SPATIAL INDEX(b);
SHOW CREATE TABLE t1;
ALTER TABLE t1 ADD KEY(b(50));
SHOW CREATE TABLE t1;

ALTER TABLE t1 ADD c POINT;
SHOW CREATE TABLE t1;

--error ER_WRONG_SUB_KEY
CREATE TABLE t2 (a INT, KEY (a(20)));

ALTER TABLE t1 ADD d INT;
--error ER_WRONG_SUB_KEY
ALTER TABLE t1 ADD KEY (d(20));

# the 5.1 part of the test
--error ER_WRONG_SUB_KEY
ALTER TABLE t1 ADD e GEOMETRY NOT NULL, ADD SPATIAL KEY (e(30));

DROP TABLE t1;

#
# Bug#18038  MySQL server corrupts binary columns data
#

CREATE TABLE t1 (s CHAR(8) BINARY);
INSERT INTO t1 VALUES ('test');
SELECT LENGTH(s) FROM t1;
ALTER TABLE t1 MODIFY s CHAR(10) BINARY;
SELECT LENGTH(s) FROM t1;
DROP TABLE t1;

CREATE TABLE t1 (s BINARY(8));
INSERT INTO t1 VALUES ('test');
SELECT LENGTH(s) FROM t1;
SELECT HEX(s) FROM t1;
ALTER TABLE t1 MODIFY s BINARY(10);
SELECT HEX(s) FROM t1;
SELECT LENGTH(s) FROM t1;
DROP TABLE t1;

#
# Bug#19386: Multiple alter causes crashed table
# The trailing column would get corrupted data, or server could not even read
# it.
#

CREATE TABLE t1 (v VARCHAR(3), b INT);
INSERT INTO t1 VALUES ('abc', 5);
SELECT * FROM t1;
ALTER TABLE t1 MODIFY COLUMN v VARCHAR(4);
SELECT * FROM t1;
DROP TABLE t1;


#
# Bug#31291 ALTER TABLE CONVERT TO CHARACTER SET does not change some data types
#
create table t1 (a tinytext character set latin1);
alter table t1 convert to character set utf8;
show create table t1;
drop table t1;
create table t1 (a mediumtext character set latin1);
alter table t1 convert to character set utf8;
show create table t1;
drop table t1;

--echo End of 5.0 tests

#
# Extended test coverage for ALTER TABLE behaviour under LOCK TABLES
# It should be consistent across all platforms and for all engines
# (Before 5.1 this was not true as behavior was different between 
# Unix/Windows and transactional/non-transactional tables).
# See also innodb_mysql.test
#
--disable_warnings
drop table if exists t1, t2, t3;
--enable_warnings
create table t1 (i int);
create table t3 (j int);
insert into t1 values ();
insert into t3 values ();
# Table which is altered under LOCK TABLES it should stay in list of locked
# tables and be available after alter takes place unless ALTER contains RENAME
# clause. We should see the new definition of table, of course.
lock table t1 write, t3 read;
# Example of so-called 'fast' ALTER TABLE
alter table t1 modify i int default 1;
insert into t1 values ();
select * from t1;
# And now full-blown ALTER TABLE
alter table t1 change i c char(10) default "Two";
insert into t1 values ();
select * from t1;
# If table is renamed then it should be removed from the list
# of locked tables. 'Fast' ALTER TABLE with RENAME clause:
alter table t1 modify c char(10) default "Three", rename to t2;
--error ER_TABLE_NOT_LOCKED
select * from t1;
--error ER_TABLE_NOT_LOCKED
select * from t2;
select * from t3;
unlock tables;
insert into t2 values ();
select * from t2;
lock table t2 write, t3 read;
# Full ALTER TABLE with RENAME
alter table t2 change c vc varchar(100) default "Four", rename to t1;
--error ER_TABLE_NOT_LOCKED
select * from t1;
--error ER_TABLE_NOT_LOCKED
select * from t2;
select * from t3;
unlock tables;
insert into t1 values ();
select * from t1;
drop tables t1, t3;


#
# Bug#18775 - Temporary table from alter table visible to other threads
#
# Check if special characters work and duplicates are detected.
--disable_warnings
DROP TABLE IF EXISTS `t+1`, `t+2`;
--enable_warnings
CREATE TABLE `t+1` (c1 INT);
ALTER TABLE  `t+1` RENAME `t+2`;
CREATE TABLE `t+1` (c1 INT);
--error ER_TABLE_EXISTS_ERROR
ALTER TABLE  `t+1` RENAME `t+2`;
DROP TABLE   `t+1`, `t+2`;
#
# Same for temporary tables though these names do not become file names.
CREATE TEMPORARY TABLE `tt+1` (c1 INT);
ALTER TABLE  `tt+1` RENAME `tt+2`;
CREATE TEMPORARY TABLE `tt+1` (c1 INT);
--error ER_TABLE_EXISTS_ERROR
ALTER TABLE  `tt+1` RENAME `tt+2`;
SHOW CREATE TABLE `tt+1`;
SHOW CREATE TABLE `tt+2`;
DROP TABLE   `tt+1`, `tt+2`;
#
# Check if special characters as in tmp_file_prefix work.
CREATE TABLE `#sql1` (c1 INT);
CREATE TABLE `@0023sql2` (c1 INT);
SHOW TABLES;
RENAME TABLE `#sql1`     TO `@0023sql1`;
RENAME TABLE `@0023sql2` TO `#sql2`;
SHOW TABLES;
ALTER TABLE `@0023sql1`  RENAME `#sql-1`;
ALTER TABLE `#sql2`      RENAME `@0023sql-2`;
SHOW TABLES;
INSERT INTO `#sql-1`     VALUES (1);
INSERT INTO `@0023sql-2` VALUES (2);
DROP TABLE `#sql-1`, `@0023sql-2`;
#
# Same for temporary tables though these names do not become file names.
CREATE TEMPORARY TABLE `#sql1` (c1 INT);
CREATE TEMPORARY TABLE `@0023sql2` (c1 INT);
SHOW TABLES;
ALTER TABLE `#sql1`      RENAME `@0023sql1`;
ALTER TABLE `@0023sql2`  RENAME `#sql2`;
SHOW TABLES;
INSERT INTO `#sql2`      VALUES (1);
INSERT INTO `@0023sql1`  VALUES (2);
SHOW CREATE TABLE `#sql2`;
SHOW CREATE TABLE `@0023sql1`;
DROP TABLE `#sql2`, `@0023sql1`;

#
# Bug #22369: Alter table rename combined with other alterations causes lost tables
#
# This problem happens if the data change is compatible.
# Changing to the same type is compatible for example.
#
--disable_warnings
DROP TABLE IF EXISTS t1;
DROP TABLE IF EXISTS t2;
--enable_warnings
CREATE TABLE t1 (
  int_field INTEGER UNSIGNED NOT NULL,
  char_field CHAR(10),
  INDEX(`int_field`)
);

DESCRIBE t1;

SHOW INDEXES FROM t1;

INSERT INTO t1 VALUES (1, "edno"), (1, "edno"), (2, "dve"), (3, "tri"), (5, "pet"); 
--echo "Non-copy data change - new frm, but old data and index files"
ALTER TABLE t1
  CHANGE int_field unsigned_int_field INTEGER UNSIGNED NOT NULL,
  RENAME t2;

--error ER_NO_SUCH_TABLE
SELECT * FROM t1 ORDER BY int_field;
SELECT * FROM t2 ORDER BY unsigned_int_field;
DESCRIBE t2;
DESCRIBE t2;
ALTER TABLE t2 MODIFY unsigned_int_field BIGINT UNSIGNED NOT NULL;
DESCRIBE t2;

DROP TABLE t2;

#
# Bug#28427: Columns were renamed instead of moving by ALTER TABLE.
#
CREATE TABLE t1 (f1 INT, f2 INT, f3 INT);
INSERT INTO t1 VALUES (1, 2, NULL);
SELECT * FROM t1;
ALTER TABLE t1 MODIFY COLUMN f3 INT AFTER f1;
SELECT * FROM t1;
ALTER TABLE t1 MODIFY COLUMN f3 INT AFTER f2;
SELECT * FROM t1;
DROP TABLE t1;

#
# BUG#29957 - alter_table.test fails
#
create table t1 (c char(10) default "Two");
lock table t1 write;
insert into t1 values ();
alter table t1 modify c char(10) default "Three";
unlock tables;
select * from t1;
check table t1;
drop table t1;

#
# Bug#33873: Fast ALTER TABLE doesn't work with multibyte character sets
#

--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings
CREATE TABLE t1 (id int, c int) character set latin1;
INSERT INTO t1 VALUES (1,1);
--enable_info
ALTER TABLE t1 CHANGE c d int;
ALTER TABLE t1 CHANGE d c int;
ALTER TABLE t1 MODIFY c VARCHAR(10);
ALTER TABLE t1 CHANGE c d varchar(10);
ALTER TABLE t1 CHANGE d c varchar(10);
--disable_info
DROP TABLE t1;

--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings
CREATE TABLE t1 (id int, c int) character set utf8;
INSERT INTO t1 VALUES (1,1);
--enable_info
ALTER TABLE t1 CHANGE c d int;
ALTER TABLE t1 CHANGE d c int;
ALTER TABLE t1 MODIFY c VARCHAR(10);
ALTER TABLE t1 CHANGE c d varchar(10);
ALTER TABLE t1 CHANGE d c varchar(10);
--disable_info
DROP TABLE t1;

#
# Bug#39372 "Smart" ALTER TABLE not so smart after all.
#
create table t1(f1 int not null, f2 int not null, key  (f1), key (f2));
let $count= 50;
--disable_query_log
while ($count)
{
  EVAL insert into t1 values (1,1),(1,1),(1,1),(1,1),(1,1);
  EVAL insert into t1 values (2,2),(2,2),(2,2),(2,2),(2,2);
  dec $count ;
}
--enable_query_log

select index_length into @unpaked_keys_size from
information_schema.tables where table_name='t1';
alter table t1 pack_keys=1;
select index_length into @paked_keys_size from
information_schema.tables where table_name='t1';
select (@unpaked_keys_size > @paked_keys_size);

select max_data_length into @orig_max_data_length from
information_schema.tables where table_name='t1';
alter table t1 max_rows=100;
select max_data_length into @changed_max_data_length from
information_schema.tables where table_name='t1';
select (@orig_max_data_length > @changed_max_data_length);

drop table t1;

#
# Bug #23113: Different behavior on altering ENUM fields between 5.0 and 5.1
#
CREATE TABLE t1(a INT AUTO_INCREMENT PRIMARY KEY, 
  b ENUM('a', 'b', 'c') NOT NULL);
INSERT INTO t1 (b) VALUES ('a'), ('c'), ('b'), ('b'), ('a');
ALTER TABLE t1 MODIFY b ENUM('a', 'z', 'b', 'c') NOT NULL;
SELECT * FROM t1;
DROP TABLE t1;

--echo #
--echo # Bug#45567: Fast ALTER TABLE broken for enum and set
--echo #

--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings

CREATE TABLE t1 (a ENUM('a1','a2'));
INSERT INTO t1 VALUES ('a1'),('a2');
--enable_info
--echo # No copy: No modification
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2');
--echo # No copy: Add new enumeration to the end
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2','a3');
--echo # Copy: Modify and add new to the end
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2','xx','a5');
--echo # Copy: Remove from the end
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2','xx');
--echo # Copy: Add new enumeration
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2','a0','xx');
--echo # No copy: Add new enumerations to the end
ALTER TABLE t1 MODIFY COLUMN a ENUM('a1','a2','a0','xx','a5','a6');
--disable_info
DROP TABLE t1;

CREATE TABLE t1 (a SET('a1','a2'));
INSERT INTO t1 VALUES ('a1'),('a2');
--enable_info
--echo # No copy: No modification
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2');
--echo # No copy: Add new to the end
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a3');
--echo # Copy: Modify and add new to the end
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','xx','a5');
--echo # Copy: Remove from the end
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','xx');
--echo # Copy: Add new member
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx');
--echo # No copy: Add new to the end
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6');
--echo # Copy: Numerical incrase (pack lenght)
ALTER TABLE t1 MODIFY COLUMN a SET('a1','a2','a0','xx','a5','a6','a7','a8','a9','a10');
--disable_info
DROP TABLE t1;

#
# Bug#43508: Renaming timestamp or date column triggers table copy
#

CREATE TABLE t1 (f1 TIMESTAMP NULL DEFAULT NULL,
                 f2 INT(11) DEFAULT NULL) ENGINE=MYISAM DEFAULT CHARSET=utf8;

INSERT INTO t1 VALUES (NULL, NULL), ("2009-10-09 11:46:19", 2);

--echo this should affect no rows as there is no real change
--enable_info
ALTER TABLE t1 CHANGE COLUMN f1 f1_no_real_change TIMESTAMP NULL DEFAULT NULL;
--disable_info
DROP TABLE t1;


--echo #
--echo # Bug #31145: ALTER TABLE DROP COLUMN, ADD COLUMN crashes (linux) 
--echo #   or freezes (win) the server
--echo #

CREATE TABLE t1 (a TEXT, id INT, b INT);
ALTER TABLE t1 DROP COLUMN a, ADD COLUMN c TEXT FIRST;

DROP TABLE t1;


--echo #
--echo # Test for bug #12652385 - "61493: REORDERING COLUMNS TO POSITION
--echo #                           FIRST CAN CAUSE DATA TO BE CORRUPTED".
--echo #
--disable_warnings
drop table if exists t1;
--enable_warnings
--echo # Use MyISAM engine as the fact that InnoDB doesn't support
--echo # in-place ALTER TABLE in cases when columns are being renamed
--echo # hides some bugs.
create table t1 (i int, j int) engine=myisam;
insert into t1 value (1, 2);
--echo # First, test for original problem described in the bug report.
select * from t1;
--echo # Change of column order by the below ALTER TABLE statement should
--echo # affect both column names and column contents.
alter table t1 modify column j int first;
select * from t1;
--echo # Now test for similar problem with the same root.
--echo # The below ALTER TABLE should change not only the name but
--echo # also the value for the last column of the table.
alter table t1 drop column i, add column k int default 0;
select * from t1;
--echo # Clean-up.
drop table t1;


--echo End of 5.1 tests

#
# Bug #31031 ALTER TABLE regression in 5.0
#
#  The ALTER TABLE operation failed with 
#  ERROR 1089 (HY000): Incorrect sub part key; ...
#
CREATE TABLE t1(c CHAR(10), 
  i INT UNSIGNED AUTO_INCREMENT NOT NULL PRIMARY KEY);
INSERT INTO t1 VALUES('a',2),('b',4),('c',6);
ALTER TABLE t1
  DROP i,
  ADD i INT UNSIGNED NOT NULL AUTO_INCREMENT,
  AUTO_INCREMENT = 1;
DROP TABLE t1;


#
# Bug#50542 5.5.x doesn't check length of key prefixes: 
#           corruption and crash results
#
# This case is related to Bug#31031 (above)
# A statement where the index key is larger/wider than
# the column type, should cause an error
#
--error ER_WRONG_SUB_KEY
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (a(255)));

# Test other variants of creating indices
CREATE TABLE t1 (a CHAR(1));
#  ALTER TABLE
--error ER_WRONG_SUB_KEY
ALTER TABLE t1 ADD PRIMARY KEY (a(20));
--error ER_WRONG_SUB_KEY
ALTER TABLE t1 ADD KEY (a(20));
#  CREATE INDEX
--error ER_WRONG_SUB_KEY
CREATE UNIQUE INDEX i1 ON t1 (a(20));
--error ER_WRONG_SUB_KEY
CREATE INDEX i2 ON t1 (a(20));
# cleanup
DROP TABLE t1;


#
# Bug #45052    ALTER TABLE ADD COLUMN crashes server with multiple foreign key columns
#   The alter table fails if 2 or more new fields added and
#   also added a key with these fields
#
CREATE TABLE t1 (id int);
INSERT INTO t1 VALUES (1), (2);
ALTER TABLE t1 ADD COLUMN (f1 INT), ADD COLUMN (f2 INT), ADD KEY f2k(f2);
DROP TABLE t1;


--echo #
--echo # Test for bug #53820 "ALTER a MEDIUMINT column table causes full
--echo #                      table copy".
--echo #
--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings
CREATE TABLE t1 (a INT, b MEDIUMINT);
INSERT INTO t1 VALUES (1, 1), (2, 2);
--echo # The below ALTER should not copy table and so no rows should
--echo # be shown as affected.
--enable_info
ALTER TABLE t1 CHANGE a id INT;
--disable_info
DROP TABLE t1;


--echo #
--echo # Bug#11754461 CANNOT ALTER TABLE WHEN KEY PREFIX TOO LONG
--echo #

--disable_warnings
DROP DATABASE IF EXISTS db1;
--enable_warnings

CREATE DATABASE db1 CHARACTER SET utf8;
CREATE TABLE db1.t1 (bar TINYTEXT, KEY (bar(100)));
ALTER TABLE db1.t1 ADD baz INT;

DROP DATABASE db1;


--echo # Additional coverage for refactoring which is made as part
--echo # of fix for bug #27480 "Extend CREATE TEMPORARY TABLES privilege
--echo # to allow temp table operations".
--echo #
--echo # At some point the below test case failed on assertion.

--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings

CREATE TEMPORARY TABLE t1 (i int) ENGINE=MyISAM;

--error ER_ILLEGAL_HA
ALTER TABLE t1 DISCARD TABLESPACE;

DROP TABLE t1;


--echo #
--echo # Bug#11938039 RE-EXECUTION OF FRM-ONLY ALTER TABLE WITH RENAME
--echo #              CLAUSE FAILS OR ABORTS SERVER.
--echo #
--disable_warnings
drop table if exists t1;
--enable_warnings
create table t1 (a int);
prepare stmt1 from 'alter table t1 alter column a set default 1, rename to t2';
execute stmt1;
rename table t2 to t1;
--echo # The below statement should succeed and not emit error or abort server.
execute stmt1;
deallocate prepare stmt1;
drop table t2;


--echo # Bug#11748057 (formerly known as 34972): ALTER TABLE statement doesn't
--echo #                                         identify correct column name.
--echo #

CREATE TABLE t1 (c1 int unsigned , c2 char(100) not null default '');
ALTER TABLE t1 ADD c3 char(16) NOT NULL DEFAULT '' AFTER c2,
               MODIFY c2 char(100) NOT NULL DEFAULT '' AFTER c1;
SHOW CREATE TABLE t1;
DROP TABLE t1;


--echo #
--echo # WL#5534 Online ALTER, Phase 1
--echo #

--echo # Single thread tests.
--echo # See innodb_mysql_sync.test for multi thread tests.

--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings

CREATE TABLE t1(a INT PRIMARY KEY, b INT) engine=InnoDB;
CREATE TABLE m1(a INT PRIMARY KEY, b INT) engine=MyISAM;
INSERT INTO t1 VALUES (1,1), (2,2);
INSERT INTO m1 VALUES (1,1), (2,2);

--echo #
--echo # 1: Test ALGORITHM keyword
--echo #

--echo # --enable_info allows us to see how many rows were updated
--echo # by ALTER TABLE. in-place will show 0 rows, while copy > 0.

--enable_info
ALTER TABLE t1 ADD INDEX i1(b);
ALTER TABLE t1 ADD INDEX i2(b), ALGORITHM= DEFAULT;
ALTER TABLE t1 ADD INDEX i3(b), ALGORITHM= COPY;
ALTER TABLE t1 ADD INDEX i4(b), ALGORITHM= INPLACE;
--error ER_UNKNOWN_ALTER_ALGORITHM
ALTER TABLE t1 ADD INDEX i5(b), ALGORITHM= INVALID;

ALTER TABLE m1 ENABLE KEYS;
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= DEFAULT;
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= COPY;
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= INPLACE;
--disable_info

ALTER TABLE t1 DROP INDEX i1, DROP INDEX i2, DROP INDEX i3, DROP INDEX i4;

--echo #
--echo # 2: Test ALGORITHM + old_alter_table
--echo #

--enable_info
SET SESSION old_alter_table= 1;
ALTER TABLE t1 ADD INDEX i1(b);
ALTER TABLE t1 ADD INDEX i2(b), ALGORITHM= DEFAULT;
ALTER TABLE t1 ADD INDEX i3(b), ALGORITHM= COPY;
ALTER TABLE t1 ADD INDEX i4(b), ALGORITHM= INPLACE;
SET SESSION old_alter_table= 0;
--disable_info

ALTER TABLE t1 DROP INDEX i1, DROP INDEX i2, DROP INDEX i3, DROP INDEX i4;

--echo #
--echo # 3: Test unsupported in-place operation
--echo #

ALTER TABLE t1 ADD COLUMN (c1 INT);
ALTER TABLE t1 ADD COLUMN (c2 INT), ALGORITHM= DEFAULT;
ALTER TABLE t1 ADD COLUMN (c3 INT), ALGORITHM= COPY;
ALTER TABLE t1 ADD COLUMN (c4 INT), ALGORITHM= INPLACE;

ALTER TABLE t1 DROP COLUMN c1, DROP COLUMN c2, DROP COLUMN c3, DROP COLUMN c4;

--echo #
--echo # 4: Test LOCK keyword
--echo #

--enable_info
ALTER TABLE t1 ADD INDEX i1(b), LOCK= DEFAULT;
ALTER TABLE t1 ADD INDEX i2(b), LOCK= NONE;
ALTER TABLE t1 ADD INDEX i3(b), LOCK= SHARED;
ALTER TABLE t1 ADD INDEX i4(b), LOCK= EXCLUSIVE;
--error ER_UNKNOWN_ALTER_LOCK
ALTER TABLE t1 ADD INDEX i5(b), LOCK= INVALID;
--disable_info

ALTER TABLE m1 ENABLE KEYS, LOCK= DEFAULT;
--error ER_ALTER_OPERATION_NOT_SUPPORTED
ALTER TABLE m1 ENABLE KEYS, LOCK= NONE;
--error ER_ALTER_OPERATION_NOT_SUPPORTED
ALTER TABLE m1 ENABLE KEYS, LOCK= SHARED;
ALTER TABLE m1 ENABLE KEYS, LOCK= EXCLUSIVE;

ALTER TABLE t1 DROP INDEX i1, DROP INDEX i2, DROP INDEX i3, DROP INDEX i4;

--echo #
--echo # 5: Test ALGORITHM + LOCK
--echo #

--enable_info
ALTER TABLE t1 ADD INDEX i1(b), ALGORITHM= INPLACE, LOCK= NONE;
ALTER TABLE t1 ADD INDEX i2(b), ALGORITHM= INPLACE, LOCK= SHARED;
ALTER TABLE t1 ADD INDEX i3(b), ALGORITHM= INPLACE, LOCK= EXCLUSIVE;
--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 ADD INDEX i4(b), ALGORITHM= COPY, LOCK= NONE;
ALTER TABLE t1 ADD INDEX i5(b), ALGORITHM= COPY, LOCK= SHARED;
ALTER TABLE t1 ADD INDEX i6(b), ALGORITHM= COPY, LOCK= EXCLUSIVE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= INPLACE, LOCK= NONE;
--error ER_ALTER_OPERATION_NOT_SUPPORTED
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= INPLACE, LOCK= SHARED;
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= INPLACE, LOCK= EXCLUSIVE;
--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= COPY, LOCK= NONE;
# This works because the lock will be SNW for the copy phase.
# It will still require exclusive lock for actually enabling keys.
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= COPY, LOCK= SHARED;
ALTER TABLE m1 ENABLE KEYS, ALGORITHM= COPY, LOCK= EXCLUSIVE;
--disable_info

DROP TABLE t1, m1;

--echo #
--echo # 6: Possible deadlock involving thr_lock.c
--echo #

CREATE TABLE t1(a INT PRIMARY KEY, b INT);
INSERT INTO t1 VALUES (1,1), (2,2);

START TRANSACTION;
INSERT INTO t1 VALUES (3,3);

--echo # Connection con1
connect (con1, localhost, root);
--echo # Sending:
--send ALTER TABLE t1 DISABLE KEYS

--echo # Connection default
connection default;
--echo # Waiting until ALTER TABLE is blocked.
let $wait_condition=
  SELECT COUNT(*) = 1 FROM information_schema.processlist
  WHERE state = "Waiting for table metadata lock" AND
        info = "ALTER TABLE t1 DISABLE KEYS";
--source include/wait_condition.inc
UPDATE t1 SET b = 4;
COMMIT;

--echo # Connection con1
connection con1;
--echo # Reaping: ALTER TABLE t1 DISABLE KEYS
--reap
disconnect con1;
--source include/wait_until_disconnected.inc

--echo # Connection default
connection default;
DROP TABLE t1;

--echo #
--echo # 7: Which operations require copy and which can be done in-place?
--echo #
--echo # Test which ALTER TABLE operations are done in-place and
--echo # which operations are done using temporary table copy.
--echo #
--echo # --enable_info allows us to see how many rows were updated
--echo # by ALTER TABLE. in-place will show 0 rows, while copy > 0.
--echo #

--disable_warnings
DROP TABLE IF EXISTS ti1, ti2, ti3, tm1, tm2, tm3;
--enable_warnings

--echo # Single operation tests

CREATE TABLE ti1(a INT NOT NULL, b INT, c INT) engine=InnoDB;
CREATE TABLE tm1(a INT NOT NULL, b INT, c INT) engine=MyISAM;
CREATE TABLE ti2(a INT PRIMARY KEY AUTO_INCREMENT, b INT, c INT) engine=InnoDB;
CREATE TABLE tm2(a INT PRIMARY KEY AUTO_INCREMENT, b INT, c INT) engine=MyISAM;
INSERT INTO ti1 VALUES (1,1,1), (2,2,2);
INSERT INTO ti2 VALUES (1,1,1), (2,2,2);
INSERT INTO tm1 VALUES (1,1,1), (2,2,2);
INSERT INTO tm2 VALUES (1,1,1), (2,2,2);

--enable_info
ALTER TABLE ti1;
ALTER TABLE tm1;

ALTER TABLE ti1 ADD COLUMN d VARCHAR(200);
ALTER TABLE tm1 ADD COLUMN d VARCHAR(200);
ALTER TABLE ti1 ADD COLUMN d2 VARCHAR(200);
ALTER TABLE tm1 ADD COLUMN d2 VARCHAR(200);
ALTER TABLE ti1 ADD COLUMN e ENUM('a', 'b') FIRST;
ALTER TABLE tm1 ADD COLUMN e ENUM('a', 'b') FIRST;
ALTER TABLE ti1 ADD COLUMN f INT AFTER a;
ALTER TABLE tm1 ADD COLUMN f INT AFTER a;

ALTER TABLE ti1 ADD INDEX ii1(b);
ALTER TABLE tm1 ADD INDEX im1(b);
ALTER TABLE ti1 ADD UNIQUE INDEX ii2 (c);
ALTER TABLE tm1 ADD UNIQUE INDEX im2 (c);
ALTER TABLE ti1 ADD FULLTEXT INDEX ii3 (d);
ALTER TABLE tm1 ADD FULLTEXT INDEX im3 (d);
ALTER TABLE ti1 ADD FULLTEXT INDEX ii4 (d2);
ALTER TABLE tm1 ADD FULLTEXT INDEX im4 (d2);

# Bug#14140038 INCONSISTENT HANDLING OF FULLTEXT INDEXES IN ALTER TABLE
--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE ti1 ADD PRIMARY KEY(a), ALGORITHM=INPLACE;
ALTER TABLE ti1 ADD PRIMARY KEY(a);
ALTER TABLE tm1 ADD PRIMARY KEY(a);

ALTER TABLE ti1 DROP INDEX ii3;
ALTER TABLE tm1 DROP INDEX im3;

ALTER TABLE ti1 DROP COLUMN d2;
ALTER TABLE tm1 DROP COLUMN d2;

ALTER TABLE ti1 ADD CONSTRAINT fi1 FOREIGN KEY (b) REFERENCES ti2(a);
ALTER TABLE tm1 ADD CONSTRAINT fm1 FOREIGN KEY (b) REFERENCES tm2(a);

ALTER TABLE ti1 ALTER COLUMN b SET DEFAULT 1;
ALTER TABLE tm1 ALTER COLUMN b SET DEFAULT 1;
ALTER TABLE ti1 ALTER COLUMN b DROP DEFAULT;
ALTER TABLE tm1 ALTER COLUMN b DROP DEFAULT;

# This will set both ALTER_COLUMN_NAME and COLUMN_DEFAULT_VALUE
ALTER TABLE ti1 CHANGE COLUMN f g INT;
ALTER TABLE tm1 CHANGE COLUMN f g INT;
ALTER TABLE ti1 CHANGE COLUMN g h VARCHAR(20);
ALTER TABLE tm1 CHANGE COLUMN g h VARCHAR(20);
ALTER TABLE ti1 MODIFY COLUMN e ENUM('a', 'b', 'c');
ALTER TABLE tm1 MODIFY COLUMN e ENUM('a', 'b', 'c');
ALTER TABLE ti1 MODIFY COLUMN e INT;
ALTER TABLE tm1 MODIFY COLUMN e INT;
# This will set both ALTER_COLUMN_ORDER and COLUMN_DEFAULT_VALUE
ALTER TABLE ti1 MODIFY COLUMN e INT AFTER h;
ALTER TABLE tm1 MODIFY COLUMN e INT AFTER h;
ALTER TABLE ti1 MODIFY COLUMN e INT FIRST;
ALTER TABLE tm1 MODIFY COLUMN e INT FIRST;
# This will set both ALTER_COLUMN_NOT_NULLABLE and COLUMN_DEFAULT_VALUE
--disable_info
# NULL -> NOT NULL only allowed INPLACE if strict sql_mode is on.
SET @orig_sql_mode = @@sql_mode;
SET @@sql_mode = 'STRICT_TRANS_TABLES';
--enable_info
ALTER TABLE ti1 MODIFY COLUMN c INT NOT NULL;
--disable_info
SET @@sql_mode = @orig_sql_mode;
--enable_info
ALTER TABLE tm1 MODIFY COLUMN c INT NOT NULL;
# This will set both ALTER_COLUMN_NULLABLE and COLUMN_DEFAULT_VALUE
ALTER TABLE ti1 MODIFY COLUMN c INT NULL;
ALTER TABLE tm1 MODIFY COLUMN c INT NULL;
# This will set both ALTER_COLUMN_EQUAL_PACK_LENGTH and COLUMN_DEFAULT_VALUE
ALTER TABLE ti1 MODIFY COLUMN h VARCHAR(30);
ALTER TABLE tm1 MODIFY COLUMN h VARCHAR(30);
ALTER TABLE ti1 MODIFY COLUMN h VARCHAR(30) AFTER d;
ALTER TABLE tm1 MODIFY COLUMN h VARCHAR(30) AFTER d;

ALTER TABLE ti1 DROP COLUMN h;
ALTER TABLE tm1 DROP COLUMN h;

ALTER TABLE ti1 DROP INDEX ii2;
ALTER TABLE tm1 DROP INDEX im2;
ALTER TABLE ti1 DROP PRIMARY KEY;
ALTER TABLE tm1 DROP PRIMARY KEY;

ALTER TABLE ti1 DROP FOREIGN KEY fi1;
ALTER TABLE tm1 DROP FOREIGN KEY fm1;

ALTER TABLE ti1 RENAME TO ti3;
ALTER TABLE tm1 RENAME TO tm3;
ALTER TABLE ti3 RENAME TO ti1;
ALTER TABLE tm3 RENAME TO tm1;

ALTER TABLE ti1 ORDER BY b;
ALTER TABLE tm1 ORDER BY b;

ALTER TABLE ti1 CONVERT TO CHARACTER SET utf16;
ALTER TABLE tm1 CONVERT TO CHARACTER SET utf16;
ALTER TABLE ti1 DEFAULT CHARACTER SET utf8;
ALTER TABLE tm1 DEFAULT CHARACTER SET utf8;

ALTER TABLE ti1 FORCE;
ALTER TABLE tm1 FORCE;

ALTER TABLE ti1 AUTO_INCREMENT 3;
ALTER TABLE tm1 AUTO_INCREMENT 3;
ALTER TABLE ti1 AVG_ROW_LENGTH 10;
ALTER TABLE tm1 AVG_ROW_LENGTH 10;
ALTER TABLE ti1 CHECKSUM 1;
ALTER TABLE tm1 CHECKSUM 1;
ALTER TABLE ti1 COMMENT 'test';
ALTER TABLE tm1 COMMENT 'test';
ALTER TABLE ti1 MAX_ROWS 100;
ALTER TABLE tm1 MAX_ROWS 100;
ALTER TABLE ti1 MIN_ROWS 1;
ALTER TABLE tm1 MIN_ROWS 1;
ALTER TABLE ti1 PACK_KEYS 1;
ALTER TABLE tm1 PACK_KEYS 1;

--disable_info
DROP TABLE ti1, ti2, tm1, tm2;

--echo # Tests of >1 operation (InnoDB)

CREATE TABLE ti1(a INT PRIMARY KEY AUTO_INCREMENT, b INT) engine=InnoDB;
INSERT INTO ti1(b) VALUES (1), (2);

--enable_info
ALTER TABLE ti1 RENAME TO ti3, ADD INDEX ii1(b);

ALTER TABLE ti3 DROP INDEX ii1, AUTO_INCREMENT 5;
--disable_info
INSERT INTO ti3(b) VALUES (5);
--enable_info
ALTER TABLE ti3 ADD INDEX ii1(b), AUTO_INCREMENT 7;
--disable_info
INSERT INTO ti3(b) VALUES (7);
SELECT * FROM ti3;

DROP TABLE ti3;

--echo #
--echo # 8: Scenario in which ALTER TABLE was returning an unwarranted
--echo #    ER_ILLEGAL_HA error at some point during work on this WL.
--echo #

CREATE TABLE tm1(i INT DEFAULT 1) engine=MyISAM;
ALTER TABLE tm1 ADD INDEX ii1(i), ALTER COLUMN i DROP DEFAULT;
DROP TABLE tm1;

--echo #
--echo # Bug#11815557 60269: MYSQL SHOULD REJECT ATTEMPTS TO CREATE SYSTEM
--echo #                     TABLES IN INCORRECT ENGINE
--echo #
--echo # Note: This test assumes that only MyISAM supports system tables.
--echo #       If other engines are made to support system tables,
--echo #       then this test needs to be updated
--echo #

use mysql;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE db ENGINE=innodb;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE user ENGINE=memory;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE proc ENGINE=heap;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE func ENGINE=csv;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE event ENGINE=merge;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE servers ENGINE=innodb;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE procs_priv ENGINE=memory;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE tables_priv ENGINE=heap;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE columns_priv ENGINE=csv;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE time_zone ENGINE=merge;
--error ER_UNSUPPORTED_ENGINE
ALTER TABLE help_topic ENGINE=innodb;

--error ER_UNSUPPORTED_ENGINE
CREATE TABLE db (dummy int) ENGINE=innodb;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE user (dummy int) ENGINE=memory;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE proc (dummy int) ENGINE=heap;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE func (dummy int) ENGINE=csv;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE event (dummy int) ENGINE=merge;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE servers (dummy int) ENGINE=innodb;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE procs_priv (dummy int) ENGINE=memory;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE tables_priv (dummy int) ENGINE=heap;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE columns_priv (dummy int) ENGINE=csv;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE time_zone (dummy int) ENGINE=merge;
--error ER_UNSUPPORTED_ENGINE
CREATE TABLE help_topic (dummy int) ENGINE=innodb;
use test;
--echo # End of Bug#11815557


--echo #
--echo # BUG#17246318 - ALTER TABLE SHOULD NOT ALLOW CREATION OF TABLES
--echo #                WITH BOTH 5.5 AND 5.6 TEMPORALS
--echo #

--echo # BUG 18985760 -"FAST" ALTER TABLE CHANGE ON ENUM COLUMN 
--echo #                TRIGGERS FULL TABLE REBUILD.
--echo # Test for the case where 'avoid_temporal_upgrade' is set
--echo # to the DEFAULT value(OFF).

let $MYSQLD_DATADIR= `select @@datadir`;
--copy_file std_data/55_temporal.frm $MYSQLD_DATADIR/test/t1.frm
--copy_file std_data/55_temporal.MYD $MYSQLD_DATADIR/test/t1.MYD
--copy_file std_data/55_temporal.MYI $MYSQLD_DATADIR/test/t1.MYI

ALTER TABLE t1 ENGINE= INNODB;

--echo #ALTER operations using INPLACE algorithm is disallowed
--echo #since the table contains old temporal type.

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= INPLACE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 ADD COLUMN fld4 TIMESTAMP FIRST, ALGORITHM= INPLACE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 ADD COLUMN fld4 TIMESTAMP AFTER f_timestamp, ALGORITHM= INPLACE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 CHANGE COLUMN f_time fld4 TIMESTAMP, ALGORITHM= INPLACE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 MODIFY f_datetime TIME, ALGORITHM= INPLACE;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 ADD INDEX index1(f_datetime), ALGORITHM= INPLACE;

--echo #ALTER operations using COPY algorithm is allowed
--echo #when the table contains old temporal type.

--echo #Note: Timestamp encoding remains the same for the non-fractional part
--echo #even in the 5.6 format. Hence there is no change in the display before
--echo #and after upgrade.

--echo #ADD COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD COLUMN FIRST upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP FIRST, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD COLUMN AFTER upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP AFTER f_timestamp, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #CHANGE COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 CHANGE COLUMN f_timestamp fld4 TIMESTAMP, ALGORITHM= COPY;
SELECT f_time, f_datetime, fld4, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(fld4)) FROM t2;
DROP TABLE t2;

--echo #MODIFY COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 MODIFY f_timestamp TIME, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD INDEX upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD INDEX index1(f_timestamp), ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ALTER operations using DEFAULT algorithm is allowed
--echo #when the table contains old temporal type.

--echo #ADD COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD COLUMN FIRST upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP FIRST, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD COLUMN AFTER upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP AFTER f_timestamp, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #CHANGE COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 CHANGE COLUMN f_timestamp fld4 DATETIME, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, fld4, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(fld4)) FROM t2;
DROP TABLE t2;

--echo #MODIFY COLUMN upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 MODIFY f_timestamp TIME, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ADD INDEX upgrades the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD INDEX index1(f_timestamp), ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ALTER TABLE FORCE upgrades the old temporal types.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
              HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 FORCE;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
              HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #Examples where the NOT NULL/NULL FLAG and DEFAULT values are retained
--echo #after upgrade.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

--echo #Before upgrade.
SHOW CREATE TABLE t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= COPY;
--echo #After upgrade.
SHOW CREATE TABLE t2;

--echo #Examples of the Alter operation which does not upgrade
--echo #the temporal formats. 

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t1;

ALTER TABLE t1 DROP COLUMN f_timestamp;
SELECT f_time, f_datetime, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)) FROM t1;

RENAME TABLE t1 to t3;
SELECT f_time, f_datetime, HEX(WEIGHT_STRING(f_time)),
              HEX(WEIGHT_STRING(f_datetime)) FROM t3;

--echo #Once the old temporal type is upgraded to new temporal type,
--echo #ADD/CHANGE COLUMN, ADD INDEX operations succeed using INPLACE
--echo #ALGORITHM.

ALTER TABLE t2 ADD COLUMN fld5 INT, ALGORITHM= INPLACE;

ALTER TABLE t2 ADD INDEX index2(fld5), ALGORITHM= INPLACE;

ALTER TABLE t2 CHANGE fld5 fld6 INT, ALGORITHM= INPLACE;

ALTER TABLE t2 MODIFY fld6 INT, ALGORITHM= INPLACE;

--echo #Cleanup
DROP TABLE t2, t3;


--echo #
--echo # BUG 18985760 -"FAST" ALTER TABLE CHANGE ON ENUM COLUMN 
--echo #                TRIGGERS FULL TABLE REBUILD.
--echo #   


let $MYSQLD_DATADIR= `select @@datadir`;
--copy_file std_data/55_temporal.frm $MYSQLD_DATADIR/test/t1.frm
--copy_file std_data/55_temporal.MYD $MYSQLD_DATADIR/test/t1.MYD
--copy_file std_data/55_temporal.MYI $MYSQLD_DATADIR/test/t1.MYI

--echo # To support INPLACE ALTER table operations later in the test.
ALTER TABLE t1 ENGINE= INNODB;

--echo #Test cases with the global variable 'avoid_temporal_upgrade'
--echo #enabled.

SET @save_avoid_temporal_upgrade= @@global.avoid_temporal_upgrade;
SET GLOBAL avoid_temporal_upgrade= ON;

--echo #ALTER operations using INPLACE algorithm are allowed
--echo #when the table contains old temporal type since
--echo #the global variable 'avoid_temporal_upgrade' is
--echo #enabled. The old temporal types are not upgraded. 

CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= INPLACE;
SELECT f_time, f_datetime, f_timestamp, fld4, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)),
       HEX(WEIGHT_STRING(fld4)) FROM t2;

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld5 TIME DEFAULT '101010' FIRST, ALGORITHM= INPLACE;
SELECT f_time, f_datetime, f_timestamp, fld5, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)),
       HEX(WEIGHT_STRING(fld5)) FROM t2;

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld6 TIMESTAMP AFTER f_timestamp, ALGORITHM= INPLACE;
SELECT f_time, f_datetime, f_timestamp, fld6, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)),
       HEX(WEIGHT_STRING(fld6)) FROM t2;

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD INDEX index1(f_datetime), ALGORITHM= INPLACE;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ALTER operations using COPY algorithm are allowed
--echo #when the table contains old temporal type and 
--echo #does not upgrade the old temporal types.

--echo #ADD COLUMN does not upgrade the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD COLUMN FIRST does not upgrade the old temporal type.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld5 TIMESTAMP FIRST, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD COLUMN AFTER does not upgrade the old temporal type.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld6 TIMESTAMP AFTER f_timestamp, ALGORITHM= COPY;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #CHANGE COLUMN upgrades the old temporal type only for the column which
--echo #is changed.
#Setup table having old temporal type.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 CHANGE COLUMN f_datetime fld7 DATETIME, ALGORITHM= COPY;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
              HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #MODIFY COLUMN upgrades the old temporal type only for the column
--echo #modified.
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 MODIFY f_timestamp DATETIME, ALGORITHM= COPY;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD INDEX does not upgrade the old temporal type.
#Setup table having old temporal type.
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD INDEX index1(f_time), ALGORITHM= COPY;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ALTER operations using DEFAULT algorithm are allowed
--echo #when the table contains old temporal type and does not
--echo #upgrade the old temporal types.

--echo #ADD COLUMN does not upgrade the old temporal type.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld4 TIMESTAMP, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD COLUMN FIRST does not upgrade the old temporal type.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld5 TIMESTAMP FIRST, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD COLUMN AFTER does not upgrade the old temporal type.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD COLUMN fld6 TIMESTAMP AFTER f_timestamp, ALGORITHM= DEFAULT;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #CHANGE COLUMN upgrades the old temporal type only for the column which
--echo #is changed.
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 CHANGE COLUMN f_datetime fld7 DATETIME, ALGORITHM= DEFAULT;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #MODIFY COLUMN upgrades the old temporal type only for the column
--echo #modified.
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 MODIFY f_timestamp DATETIME, ALGORITHM= DEFAULT;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;

--echo #ADD INDEX does not upgrade the old temporal type.
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 ADD INDEX index1(f_time), ALGORITHM= DEFAULT;
SELECT f_time, fld7, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(fld7)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

--echo #ALTER TABLE FORCE does not upgrade the old temporal types.
#Setup table having old temporal type.
CREATE TABLE t2 LIKE t1;
INSERT INTO t2 VALUES ('22:22:22','2011-11-21 22:22:22','2011-11-21 22:22:22');

SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
ALTER TABLE t2 FORCE;
SELECT f_time, f_datetime, f_timestamp, HEX(WEIGHT_STRING(f_time)),
       HEX(WEIGHT_STRING(f_datetime)), HEX(WEIGHT_STRING(f_timestamp)) FROM t2;
DROP TABLE t2;

SET @@global.avoid_temporal_upgrade= @save_avoid_temporal_upgrade;

--echo #Test cases with the session variable 'show_old_temporals'
--echo #enabled.

--echo #Setup
CREATE TABLE t2(fld1 time, fld2 datetime, fld3 timestamp);
SET @save_show_old_temporals= @@session.show_old_temporals;
SET SESSION show_old_temporals= ON;

--echo #Displays a comment to indicate that the columns are of 5.5
--echo #binary format
SHOW CREATE TABLE t1;
SELECT COLUMN_TYPE FROM information_schema.columns WHERE table_name='t1';

--echo #Since the temporal types are in new format, no comment is 
--echo #displayed
SHOW CREATE TABLE t2;
SELECT COLUMN_TYPE FROM information_schema.columns WHERE table_name='t2';

--echo #Does not display the comment for table with old temporal types 
--echo #since the session variable 'show_old_temporals' is OFF.
SET SESSION show_old_temporals= OFF;
SHOW CREATE TABLE t1;
SELECT COLUMN_TYPE FROM information_schema.columns WHERE table_name='t1';

--echo #Cleanup
SET @@session.show_old_temporals= @save_show_old_temporals;
DROP TABLE t1, t2;


--echo #
--echo # Bug#21345391: ALTER TABLE ... CONVERT TO CHARACTER SET NOT EFFECT
--echo #               AND REMAIN A TEMP TABLE

CREATE TABLE t1 (fld1 INT PRIMARY KEY) ENGINE = INNODB CHARACTER SET gbk;
ALTER TABLE t1 CONVERT TO CHARACTER SET UTF8, ALGORITHM = INPLACE;

--echo # Without fix, the CHARSET SET for table remains gbk.
SHOW CREATE TABLE t1;

let $test_dir =
    `SELECT CONCAT(variable_value, 'test/') FROM
     INFORMATION_SCHEMA.GLOBAL_VARIABLES
     WHERE LOWER(variable_name) = 'datadir'`;

--echo # Without fix, the temporary .frm file is not cleaned up.
--list_files $test_dir `#sql-*.frm`

DROP TABLE t1;

--echo # Test cases added for coverage.

--echo # Reports an error for tables containing datatypes supporting
--echo # characters.

CREATE TABLE t1 (fld1 CHAR(10) PRIMARY KEY) ENGINE = INNODB CHARACTER SET gbk;

--error ER_ALTER_OPERATION_NOT_SUPPORTED_REASON
ALTER TABLE t1 CONVERT TO CHARACTER SET UTF8, ALGORITHM = INPLACE;

DROP TABLE t1;

--echo # ALTER TABLE, CHARACTER SET operation.

CREATE TABLE t1 (fld1 INT PRIMARY KEY, fld2 CHAR(10)) ENGINE = INNODB
CHARACTER SET gbk;
ALTER TABLE t1 CHARACTER SET UTF8, ALGORITHM = INPLACE;

SHOW CREATE TABLE t1;

let $test_dir =
    `SELECT CONCAT(variable_value, 'test/') FROM
     INFORMATION_SCHEMA.GLOBAL_VARIABLES
     WHERE LOWER(variable_name) = 'datadir'`;

--list_files $test_dir `#sql-*.frm`

DROP TABLE t1; 


--echo #
--echo # Bug#19635706
--echo # Verify that it is possible to add a unique key to a not-NULL POINT 
--echo # column and that this key is promoted to primary key
--echo # 

CREATE TABLE t1(a INT NOT NULL, b POINT NOT NULL) ENGINE=INNODB;
SHOW CREATE TABLE t1;
ALTER TABLE t1 ADD UNIQUE INDEX (b);

--echo # Note that SHOW CREATE TABLE does not list b as a primary key, 
--echo # even though it was promoted. This appears to be the case also 
--echo # for other column types.
SHOW CREATE TABLE t1;

ALTER TABLE t1 ADD UNIQUE INDEX (a);
SHOW CREATE TABLE t1;

--echo # Verify that the expected indices have been created by Innodb
SELECT T.NAME AS TABLE_NAME, I.NAME AS INDEX_NAME, 
       CASE I.TYPE 
            WHEN 0 THEN 'Secondary' 
            WHEN 1 THEN 'Clustered' 
            WHEN 2 THEN 'Unique' 
            WHEN 3 THEN 'Primary' 
            WHEN 32 THEN 'Full text' 
            WHEN 64 THEN 'Spatial' 
            ELSE 'Unknown' 
       END AS INDEX_TYPE, 
       F.NAME AS FIELD_NAME, F.POS AS FIELD_POS FROM 
              INFORMATION_SCHEMA.INNODB_SYS_TABLES AS T JOIN 
              INFORMATION_SCHEMA.INNODB_SYS_INDEXES AS I JOIN 
              INFORMATION_SCHEMA.INNODB_SYS_FIELDS AS F 
              ON I.INDEX_ID = F.INDEX_ID AND I.TABLE_ID = T.TABLE_ID 
       WHERE T.NAME = 'test/t1';

DROP TABLE t1;

--echo #
--echo # BUG#27788685: NO WARNING WHEN TRUNCATING A STRING WITH DATA LOSS
--echo #

SET GLOBAL max_allowed_packet=17825792;

--connect(con1, localhost, root,,)
CREATE TABLE t1 (t1_fld1 TEXT) ENGINE=InnoDB;
CREATE TABLE t2 (t2_fld1 MEDIUMTEXT) ENGINE=InnoDB;

INSERT INTO t1 VALUES (REPEAT('a',300));
INSERT INTO t2 VALUES (REPEAT('b',65680));

SELECT LENGTH(t1_fld1) FROM t1;
SELECT LENGTH(t2_fld1) FROM t2;

--echo # With strict mode
SET SQL_MODE='STRICT_ALL_TABLES';

--error ER_DATA_TOO_LONG
ALTER TABLE t1 CHANGE `t1_fld1` `my_t1_fld1` TINYTEXT;
--error ER_DATA_TOO_LONG
ALTER TABLE t2 CHANGE `t2_fld1` `my_t2_fld1` TEXT;

--echo # With non-strict mode
SET SQL_MODE='';

ALTER TABLE t1 CHANGE `t1_fld1` `my_t1_fld1` TINYTEXT;
ALTER TABLE t2 CHANGE `t2_fld1` `my_t2_fld1` TEXT;

SELECT LENGTH(my_t1_fld1) FROM t1;
SELECT LENGTH(my_t2_fld1) FROM t2;

# Cleanup
--disconnect con1
--source include/wait_until_disconnected.inc

--connection default
DROP TABLE t1, t2;

SET SQL_MODE=default;
SET GLOBAL max_allowed_packet=default;