[ Avaa Bypassed ]

--source include/have_innodb.inc
--source include/have_partition.inc
# Different page sizes gives different query plans
# results based on default 16k.
--source include/have_innodb_16k.inc

--echo # The results where created without innodb persistent stats.
SET @old_innodb_stats_persistent= @@global.innodb_stats_persistent;
SET @@global.innodb_stats_persistent= 0;

--echo # Original tests for WL#4443

--echo # Must have InnoDB as engine to get the same statistics results.
--echo # embedded uses MyISAM as default. CREATE SELECT uses the default engine.
SET @old_default_storage_engine = @@default_storage_engine;
SET @@default_storage_engine = 'InnoDB';

let $get_handler_status_counts= SELECT * FROM INFORMATION_SCHEMA.SESSION_STATUS
WHERE VARIABLE_NAME LIKE 'HANDLER_%' AND VARIABLE_VALUE > 0;

--let $MYSQLD_DATADIR= `SELECT @@datadir`



CREATE TABLE t1 (a int PRIMARY KEY, b varchar(128), KEY (b))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 13;

CREATE TABLE t2 (a int PRIMARY KEY AUTO_INCREMENT, b varchar(128))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 13;


--echo #
--echo #
--echo # Test how INSERT prune locks
--echo # First test, no defaults
--echo #
FLUSH STATUS;
INSERT INTO t1 VALUES (1, 'First row, p1');
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
--echo # 1 commit
FLUSH STATUS;
--error ER_DUP_ENTRY
INSERT INTO t1 VALUES (1, 'First row, duplicate');
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
--echo # 1 rollback
FLUSH STATUS;
INSERT INTO t1 VALUES (0, 'First row, p0'), (2, 'First row, p2'),
                      (3, 'First row, p3'), (4, 'First row, p4');
eval $get_handler_status_counts;
--echo # 10 locks (table + 4 partition * lock/unlock)
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (1 * 13, 'Second row, p0'), (2 * 13, 'Third row, p0'),
                      (3 * 13, 'Fourth row, p0'), (4 * 13, 'Fifth row, p0');
eval $get_handler_status_counts;
--echo # 4 locks (table + 1 partition lock/unlock)
--echo # 1 commit

--echo #
--echo # INSERT with auto increment, lock pruning
--echo #
FLUSH STATUS;
INSERT INTO t2 VALUES (NULL, 'First auto-inc row');
eval $get_handler_status_counts;
--echo # Auto increment value is not known until write.
--echo # 28 locks (table + 13 partition lock/unlock)
--echo # 1 commit

FLUSH STATUS;
INSERT INTO t2 (b) VALUES ('Second auto-inc row');
eval $get_handler_status_counts;
--echo # Auto increment value is not known until write.
--echo # 28 locks (table + 13 partition lock/unlock)
--echo # 1 commit

FLUSH STATUS;
INSERT INTO t2 VALUES (10, "First row, p10");
eval $get_handler_status_counts;
--echo # Insert pruning on tables with auto increment is not yet supported
--echo # 28 locks (table + 13 partition lock/unlock)
--echo # 1 commit


--echo #
--echo # UPDATE with auto increment, lock pruning
--echo #
FLUSH STATUS;
UPDATE t2 SET b = CONCAT(b, ", UPDATED") WHERE a = 10;
eval $get_handler_status_counts;
--echo # 4 locks (table + 1 partition lock/unlock)
--echo # 1 read_key + 1 update + 1 commit

--echo #
--echo # Test of pruning with secondary column auto_inc INSERT
--echo #
CREATE TABLE t3 (a INT, b INT AUTO_INCREMENT, PRIMARY KEY (a, b))
ENGINE = MyISAM
PARTITION BY HASH (a) PARTITIONS 5;
FLUSH STATUS;
INSERT INTO t3 VALUES (1, 1);
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
--echo # No commits, since MyISAM!
FLUSH STATUS;
INSERT INTO t3 VALUES (1, NULL);
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
SELECT @@sql_mode;
SET @old_sql_mode = @@sql_mode;
SET @@sql_mode = 'NO_AUTO_VALUE_ON_ZERO';
SELECT @@sql_mode;
FLUSH STATUS;
INSERT INTO t3 VALUES (1, 0);
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
SET @@sql_mode = @old_sql_mode;
SELECT @@sql_mode;
FLUSH STATUS;
INSERT INTO t3 VALUES (1, 0);
eval $get_handler_status_counts;
--echo # 4 locks (table + partition lock/unlock)
SELECT * FROM t3;
DROP TABLE t3;

--echo #
--echo # Test handling of INSERT INTO <table> VALUES (<all fields specified>)
--echo #
CREATE TABLE t3 (a INT, b CHAR(10)) PARTITION BY HASH (a) PARTITIONS 2;
FLUSH STATUS;
INSERT INTO t3 VALUES (1, "Test 1");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 VALUES (2, "Test 2"), (3, "Test 3"), (4, "Test 4");
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 VALUES (6, "Test 6"), (8, "Test 8"), (10, "Test 10");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 VALUES (5, "Test 5"), (7, "Test 7"), (9, "Test 9");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 VALUES (0, "Test 0");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (1, "Test 1");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (2, "Test 2"), (3, "Test 3"), (4, "Test 4");
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (6, "Test 6"), (8, "Test 8"), (10, "Test 10");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (5, "Test 5"), (7, "Test 7"), (9, "Test 9");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (0, "Test 0");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

--echo #
--echo # Test handling of
--echo # INSERT INTO <table> VALUES (<not all fields specified>)
--echo #
FLUSH STATUS;
INSERT INTO t3 (a) VALUES (1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a) VALUES (2), (3), (4);
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a) VALUES (6), (8), (10);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a) VALUES (5), (7), (9);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (b) VALUES ("Only b 1");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (b) VALUES ("Only b 2"), ("Only b 3");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
SELECT * FROM t3 ORDER BY a, b;
DROP TABLE t3;

--echo #
--echo # Test of insert pruning with subpartitions
--echo #
--echo # I've placed the varchar column before the int column for better
--echo # distribution by LINEAR KEY.
CREATE TABLE t3
(a int DEFAULT 10,
 b varchar(64) DEFAULT "Default",
 c varchar(64) DEFAULT "Default",
 d int unsigned DEFAULT 9,
 e varchar(255) DEFAULT "Default-filler.filler.filler.",
 PRIMARY KEY (a,b,c,d))
PARTITION BY RANGE COLUMNS (a, b)
SUBPARTITION BY LINEAR KEY (d, c)
SUBPARTITIONS 4
(PARTITION pNeg VALUES LESS THAN (0, ""),
 PARTITION `p0-9` VALUES LESS THAN (9, MAXVALUE),
 PARTITION p10 VALUES LESS THAN (10, MAXVALUE),
 PARTITION `p11-100` VALUES LESS THAN (99, MAXVALUE));
--echo #
--echo # Test INSERT with
--echo # empty field specifier list and empty value list
--echo #
FLUSH STATUS;
INSERT INTO t3 () VALUES ();
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)

--echo #
--echo # Test INSERT with
--echo # no field specifier list and full value list, including DEFAULT
--echo # specifier
--echo #
FLUSH STATUS;
INSERT INTO t3 VALUES (-1, "ZZZzzzz", "yyyYYY", -1, DEFAULT);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)

--echo #
--echo # Test INSERT with
--echo # empty field specifier list and full value list, including NULL
--echo #
FLUSH STATUS;
INSERT INTO t3 () VALUES (0, "", "", 0, NULL);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)

--echo #
--echo # Test INSERT with field specifier list for only some fields
--echo #
FLUSH STATUS;
INSERT INTO t3 (a) VALUES (1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b) VALUES (1, "Part expr fulfilled"),
                             (10, "Part expr fulfilled");
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (d) VALUES (1), (2);
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (c, d) VALUES ("Subpart expr fulfilled", 1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b, d) VALUES (10, "Full part, half subpart", 1),
                                (12, "Full part, half subpart", 1),
                                (12, "Full part, half subpart", 2),
                                (12, "Full part, half subpart", 3),
                                (12, "Full part, half subpart", 4),
                                (12, "Full part, half subpart", 0);
eval $get_handler_status_counts;
--echo # d = 0 and d = 4 goes to the same subpart!
--echo # 12 locks (1 table, 5 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (a, b, c) VALUES (1, "Full part", "Half subpart");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)
--echo # Adding 'Default' as padding to see if LINEAR KEY uses different parts.
FLUSH STATUS;
INSERT INTO t3 (a, c, d) VALUES (12, "Half part, full subpart", 1),
                                (12, "Half part, full subpartDefault", 1),
                                (12, "Half part, full subpart Default", 1);
eval $get_handler_status_counts;
--echo # First and last row goes to the same subpartition.
--echo # 6 locks (1 table, 2 subpartition lock/unlock)
FLUSH STATUS;
INSERT INTO t3 (b, c, d) VALUES ("Half part", "Full subpart", 1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)
FLUSH STATUS;

--echo #
--echo # Test INSERT with full field specifier list and full value list
--echo #
INSERT INTO t3 (a, b, c, d) VALUES (1, "Full part", "Full subpart", 1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)

--echo #
--echo # Test INSERT with no field specifier list and empty value list
--echo # (need to delete previous inserted default row first...)
--echo #
DELETE FROM t3 WHERE a = 10 AND b = 'Default' AND c = 'Default' AND D = 9;
FLUSH STATUS;
INSERT INTO t3 VALUES ();
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 subpartition lock/unlock)

--echo #
--echo # Verifing result
--echo #
--sorted_result
SELECT * FROM t3;
--sorted_result
SELECT d, c FROM t3 PARTITION(`p11-100sp0`);
--sorted_result
SELECT d, c FROM t3 PARTITION(`p11-100sp1`);
--sorted_result
SELECT d, c FROM t3 PARTITION(`p11-100sp2`);
--sorted_result
SELECT d, c FROM t3 PARTITION(`p11-100sp3`);

--echo #
--echo # Test with LOCK TABLES
--echo #
--error ER_PARSE_ERROR
LOCK TABLES t3 PARTITION (`p11-100sp0`) WRITE;
FLUSH STATUS;
LOCK TABLES t3 WRITE;
eval $get_handler_status_counts;
--echo # 17 locks (1 table, 16 partitions lock)
--echo # No further locks/unlocks until UNLOCK TABLES.

--echo #
--echo # Test INSERT with no field specifier list and empty value list
--echo # (need to delete previous inserted default row first...)
--echo #
DELETE FROM t3 WHERE a = 10 AND b = 'Default' AND c = 'Default' AND D = 9;
FLUSH STATUS;
INSERT INTO t3 VALUES ();
eval $get_handler_status_counts;
FLUSH STATUS;

--echo #
--echo # Test INSERT with field specifier list for only some fields
--echo # (need to delete previous inserted default row first...)
--echo #
DELETE FROM t3
WHERE a = 10 AND b = "Default" AND c = "Default" AND d = 9;
eval $get_handler_status_counts;
FLUSH STATUS;
INSERT INTO t3 (b, d, e) VALUES (DEFAULT, DEFAULT, "All default!");
eval $get_handler_status_counts;
FLUSH STATUS;

--echo #
--echo # Test UPDATE of non PK field in default row
--echo #
UPDATE t3
SET e = CONCAT(e, ", updated")
WHERE a = 10 AND b = "Default" AND c = "Default" AND d = 9;
eval $get_handler_status_counts;
FLUSH STATUS;

--echo #
--echo # Test UPDATE of PK field + non PK field in default row
--echo #
UPDATE t3
SET a = DEFAULT, b = "Not DEFAULT!", e = CONCAT(e, ", updated2")
WHERE a = 10 AND b = "Default" AND c = "Default" AND d = 9;
eval $get_handler_status_counts;
FLUSH STATUS;

--echo #
--echo # Test REPLACE of default row (INSERT, since not duplicate)
--echo #
REPLACE INTO t3 (e) VALUES ("New default row");
eval $get_handler_status_counts;
FLUSH STATUS;
SELECT * FROM t3
WHERE a = 10 AND b = "Default" AND c = "Default" AND d = 9;
eval $get_handler_status_counts;
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t3
WHERE a = 10 AND b = "Default" AND c = "Default" AND d = 9;
eval $get_handler_status_counts;
FLUSH STATUS;

--echo #
--echo # Test REPLACE of default row (REPLACE, since duplicate exists)
--echo #
REPLACE INTO t3 (e) VALUES ("Newest default row");
eval $get_handler_status_counts;

--echo #
--echo # Test SELECT with explicit partition selection
--echo #
FLUSH STATUS;
--sorted_result
SELECT * FROM t3 PARTITION (p10);
eval $get_handler_status_counts;
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t3 PARTITION (p10);
eval $get_handler_status_counts;

FLUSH STATUS;
UNLOCK TABLES;
eval $get_handler_status_counts;
--echo # 17 locks (1 table, 16 partitions unlock)
DROP TABLE t3;
--echo #
--echo # End of LOCK TABLE test.
--echo #

# Only TIMESTAMP auto converts NULL to NOW().
--let $null_as_now= 1;
--let $default_update= 0;
--echo #
--echo # Test INSERT with timestamp column NO default function
--echo #
SELECT UNIX_TIMESTAMP('2011-01-01 00:00:00') as time_t,
       UNIX_TIMESTAMP('2011-01-01 00:00:00') % 3 as part,
       1234567890 % 3 as part2;
CREATE TABLE t3
(a timestamp DEFAULT 0,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY HASH (UNIX_TIMESTAMP(a)) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with timestamp column DEFAULT INSERT + UPDATE
--echo #
--let $default_update= 1;
CREATE TABLE t3
(a timestamp DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY HASH (UNIX_TIMESTAMP(a)) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with timestamp column DEFAULT UPDATE
--echo #
--let $default_update= 1;
CREATE TABLE t3
(a timestamp DEFAULT 0 ON UPDATE CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY HASH (UNIX_TIMESTAMP(a)) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with timestamp column DEFAULT INSERT
--echo #
--let $default_update= 0;
CREATE TABLE t3
(a timestamp DEFAULT CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY HASH (UNIX_TIMESTAMP(a)) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

# Only TIMESTAMP auto converts NULL to NOW().
--let $null_as_now= 0;
--let $default_update= 0;
--echo #
--echo # Test INSERT with DATETIME column NO default function
--echo #
CREATE TABLE t3
(a DATETIME DEFAULT 0,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY KEY (a) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with DATETIME column DEFAULT INSERT + UPDATE
--echo #
--let $default_update= 1;
CREATE TABLE t3
(a DATETIME DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY KEY (a) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with DATETIME column DEFAULT UPDATE
--echo #
--let $default_update= 1;
CREATE TABLE t3
(a DATETIME DEFAULT 0 ON UPDATE CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY KEY (a) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT with DATETIME column DEFAULT INSERT
--echo #
--let $default_update= 0;
CREATE TABLE t3
(a DATETIME DEFAULT CURRENT_TIMESTAMP,
 b char(10),
 PRIMARY KEY (a))
PARTITION BY KEY (a) PARTITIONS 3;
SHOW CREATE TABLE t3;
--source include/partition_default_functions.inc
DROP TABLE t3;

--echo #
--echo # Test INSERT SELECT
--echo #
FLUSH STATUS;
TRUNCATE TABLE t2;
eval $get_handler_status_counts;
--echo # All partitions needs to be locked
--echo # 28 locks (table + 13 partition lock/unlock)
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t2 SELECT a, b FROM t1 WHERE a IN (1,4);
eval $get_handler_status_counts;
--echo # All partitions in t2 needs to be locked (no propagation from t1 yet).
--echo # 2 partitions in t1 needs to be locked (for 1 and 4)
--echo # 34 locks (2 table + 15 partition lock/unlock)
--echo # 2 read_first, read_key and read_next.
--echo # 1 commit

--echo #
--echo # Test TRUNCATE PARTITION
--echo #
FLUSH STATUS;
ALTER TABLE t2 TRUNCATE PARTITION p1;
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
INSERT INTO t2 SELECT a, b FROM t1 WHERE a = 1;
eval $get_handler_status_counts;
--echo # 32 locks (2 table + 13 + 1 partitions)

--echo #
--echo # Test insert on duplicated key update
--echo #
FLUSH STATUS;
INSERT INTO t1 VALUES (65, "No duplicate")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE");
eval $get_handler_status_counts;
--echo # 4 lock (1 table + 1 partition lock/unlock)
--echo # 1 write (insert)
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (65, "No duplicate")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE");
eval $get_handler_status_counts;
--echo # 4 lock (1 table + 1 partition lock/unlock)
--echo # 1 read_key
--echo # 1 update
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (78, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 13, b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE");
eval $get_handler_status_counts;
--echo # If a partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 write (insert)
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (78, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 13, b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE");
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 read_key
--echo # 1 update
--echo # 1 commit

--echo #
--echo # Test of insert on duplicate key with failed update
--echo #
FLUSH STATUS;
INSERT INTO t1 VALUES (78, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 13,
                        b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE third");
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 commit
FLUSH STATUS;
--error ER_DUP_ENTRY
INSERT INTO t1 VALUES (78, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 13,
                        b = CONCAT(b, ", INSERT_DUP_KEY_UPDATE fail?");
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 read_key
--echo # 1 update
--echo # 1 rollback

--echo #
--echo # Test of insert on duplicate key with update to different partition
--echo #
FLUSH STATUS;
INSERT INTO t1 VALUES (104, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 1;
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 write
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (104, "No duplicate")
ON DUPLICATE KEY UPDATE a = a + 1;
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 delete
--echo # 1 write
--echo # 1 read_key
--echo # 1 commit
FLUSH STATUS;
INSERT INTO t1 VALUES (104, "No duplicate 104")
ON DUPLICATE KEY UPDATE a = a + 1;
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 write
--echo # 1 commit

--echo #
--echo # Test of insert on duplicate key with failed update to different
--echo # partition
--echo #
FLUSH STATUS;
--error ER_DUP_ENTRY
INSERT INTO t1 VALUES (104, "No duplicate 104 + 1")
ON DUPLICATE KEY UPDATE a = a + 1;
eval $get_handler_status_counts;
--echo # If partitioning column is updated, no pruning
--echo # 28 lock (1 table + 13 partition lock/unlock)
--echo # 1 write
--echo # 1 read_key
--echo # 1 rollback

--echo #
--echo # Test replace
--echo #
FLUSH STATUS;
REPLACE INTO t1 VALUES (5, "REPLACE first");
eval $get_handler_status_counts;
--echo # 4 lock (1 table + 1 partition lock/unlock)
--echo # 1 write
--echo # 1 commit
FLUSH STATUS;
REPLACE INTO t1 VALUES (5, "REPLACE second");
eval $get_handler_status_counts;
--echo # 4 lock (1 table + 1 partition lock/unlock)
--echo # 1 write
--echo # 1 read_key
--echo # 1 update (NOTE: write_record() may cheat instead of delete/insert!)
--echo # 1 rollback

--echo #
--echo # Test SELECT
--echo #
FLUSH STATUS;
SELECT * FROM t1 ORDER BY a;
eval $get_handler_status_counts;
--echo # 28 locks
--echo # 13 read_first
--echo # 13 read_key
--echo # 15 read_next
FLUSH STATUS;
SELECT * FROM t1 WHERE a IN (0, 1, 4) ORDER BY a;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
--echo # 3 read_first, read_key
--echo # 12 read_next
FLUSH STATUS;
--sorted_result
SELECT * FROM t1 WHERE a IN (13, 26, 39, 52);
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partitions lock/unlock)
--echo # 1 read_first, read_key
--echo # 9 read_next
FLUSH STATUS;
--sorted_result
SELECT * FROM t1 WHERE a = 3;
eval $get_handler_status_counts;
--echo # 4 locks
--echo # 1 read_key
FLUSH STATUS;
SELECT * FROM t1 WHERE b LIKE 'First%' ORDER BY a;
eval $get_handler_status_counts;
--echo # 28 locks
--echo # 13 read_key
--echo # 5 read_next

--echo #
--echo # Test EXPLAIN SELECT
--echo #
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1;
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a IN (0, 1, 4) ORDER BY a;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a IN (13, 26, 39, 52);
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a = 3;
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE b LIKE 'First%' ORDER BY a;
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)

--echo #
--echo # Test pruning of non static values
--echo # They will need to lock all partitions, but will allow scan pruning
--echo # due to a second pruning call in optimize.
--echo #
CREATE TABLE t3 (a INT);
INSERT INTO t3 VALUES (1);
FLUSH STATUS;
SELECT * FROM t1 WHERE a = (SELECT a FROM t3);
eval $get_handler_status_counts;
--echo # 30 locks (2 table + 13 partitions lock/unlock)
--echo # 1 read_first (NOTE only reads from one partition!)
--echo # 2 read_key
--echo # 2 read_rnd_next
FLUSH STATUS;
SELECT t1.a FROM t1 INNER JOIN t3 ON t1.a = t3.a;
eval $get_handler_status_counts;
--echo # 30 locks (2 table + 13 partitions lock/unlock)
--echo # 1 read_first (NOTE only reads from one partition!)
--echo # 2 read_key
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT t1.a, t1.b FROM t1 INNER JOIN t3 ON t1.a = t3.a;
eval $get_handler_status_counts;
--echo # 30 locks (2 table + 13 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a = (SELECT a FROM t3);
eval $get_handler_status_counts;
--echo # 30 locks (2 table + 13 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM t1 WHERE a = 1;
eval $get_handler_status_counts;
--echo # 4 locks
--echo # 1 read_key
FLUSH STATUS;
SELECT * FROM t1 WHERE a = (SELECT COUNT(*) FROM t3);
eval $get_handler_status_counts;
--echo # 30 locks (2 table + 13 partitions lock/unlock)
--echo # 1 read_first
--echo # 2 read_key, read_rnd_next
--echo #
--echo # Test of non indexed partition column
--echo #
CREATE TABLE t4 SELECT a, b FROM t1;
ALTER TABLE t4 PARTITION BY HASH (a) PARTITIONS 5;
FLUSH STATUS;
SELECT * FROM t4 WHERE a = (SELECT a FROM t3);
eval $get_handler_status_counts;
--echo # 14 locks (2 tables + 5 partitions lock/unlock)
--echo # 2 read_first, read_key
--echo # 6 read_rnd_next
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t4 WHERE a = (SELECT a FROM t3);
eval $get_handler_status_counts;
--echo # 14 locks (2 tables + 5 partitions lock/unlock)
INSERT INTO t3 VALUES (3);
--error ER_SUBQUERY_NO_1_ROW
SELECT * FROM t4 WHERE a = (SELECT a FROM t3);
--error ER_SUBQUERY_NO_1_ROW
EXPLAIN PARTITIONS SELECT * FROM t4 WHERE a = (SELECT a FROM t3);
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t4 WHERE a = (SELECT a FROM t3 LIMIT 1);
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t4 WHERE a = (SELECT MAX(a) FROM t3);
DROP TABLE t3;
DROP TABLE t4;


--echo #
--echo # Test derived tables like SELECT * FROM (SELECT * FROM ...)
--echo #
FLUSH STATUS;
SELECT * FROM (SELECT * FROM t1 WHERE a IN (0,2,3,13,26)) t3;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
--echo # 3 read_first, read_key
--echo # 11 read_next
--echo # 6 read_rnd_next (tmp table)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0,2,3,13,26)) t3) t4;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
--echo # 3 read_first, read_key
--echo # 11 read_next
--echo # 12 read_rnd_next (tmp table)


--echo #
--echo # Test EXPLAIN SELECT * FROM (SELECT * FROM ...)
--echo #
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM t1 WHERE a IN (0,2,3,13,26)) t3;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0,2,3,13,26)) t3) t4;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)


--echo #
--echo # Test SELECT ... UNION SELECT ...
--echo #
FLUSH STATUS;
--sorted_result
SELECT * FROM t1 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 56 locks (2 tables + 26 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM t1 WHERE a IN (0, 1, 13, 4) UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4) UNION SELECT * FROM t2) t3) t4;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2) t4;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3) t4 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2 WHERE a = 1) t4;
eval $get_handler_status_counts;
--echo # 12 locks (2 tables, 3 + 1 partitions lock/unlock)


--echo #
--echo # Test EXPLAIN SELECT ... UNION SELECT ...
--echo #
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 56 locks
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a IN (0, 1, 13, 4) UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4) UNION SELECT * FROM t2) t3) t4;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2) t4;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3) t4 UNION SELECT * FROM t2;
eval $get_handler_status_counts;
--echo # 36 locks (2 tables, 13 + 3 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM (SELECT * FROM (SELECT * FROM t1 WHERE a IN (0, 1, 13, 4)) t3 UNION SELECT * FROM t2 WHERE a = 1) t4;
eval $get_handler_status_counts;
--echo # 12 locks (2 tables, 3 + 1 partitions lock/unlock)


--echo #
--echo # Test UPDATE
--echo #
SELECT * FROM t1 ORDER BY a;
--echo # This should be prunable (does not change the partitioning key)
FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", updated 1") WHERE a IN (13, 26, 39, 52);
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
--echo # 4 read_key
--echo # 4 update
--echo #
--echo # This should not be prunable (only after implementing 'update pruning')
--echo # i.e if all changed partitioning field is set to constant values,
--echo # set lock_partitions to be a union of read_partition and the matching
--echo # partition for the constants. Easy if all partitioning fields are set,
--echo # probably needs a second round of prune_partitions() with these fields
--echo # set to see if possible to prune locks.
FLUSH STATUS;
UPDATE t1 SET a = 99, b = CONCAT(b, ", updated 2 -> p8") WHERE a = 13;
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
--echo # 2 read_key
--echo # 1 read_rnd
--echo # 1 delete (due to moved to another partition)
--echo # 1 write
--echo #
--echo # This should use ha_update_row instead of ha_write_row + ha_delete_row
FLUSH STATUS;
UPDATE t1 SET a = 13 + 99, b = CONCAT(b, ", updated 3") WHERE a = 99;
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
--echo # 2 read_key
--echo # 1 read_rnd
--echo # 1 update
--echo #
--echo # This should not be prunable (only after implementing
--echo # 'optimized update pruning', which will probably never happen, since
--echo # it depends on which partitioning type is used (for this only hash is
--echo # simple, but range and list is possible, key is very hard)
FLUSH STATUS;
UPDATE t1 SET a = a + 1, b = CONCAT(b, ", updated 4 -> p9") WHERE a = 112;
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
--echo # 2 read_key
--echo # 1 read_rnd
--echo # 1 delete (due to moved to another partition)
--echo # 1 write
FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", same as min(a) + 2 in t2") WHERE a = (SELECT MIN(a) + 2 FROM t2);
eval $get_handler_status_counts;
--echo # 56 locks (2 tables, 13 + 13 partitions lock/unlock)
FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", max(a) in t2: ", (SELECT MAX(a) FROM t2)) WHERE a = 5;
eval $get_handler_status_counts;
--echo # 32 locks (2 tables, 1 + 13 partitions lock/unlock)

--echo #
--echo # Test multi table UPDATE
--echo #
SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ", t1.b:", t1.b)
WHERE t2.b = t1.b and t2.a = 4;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ", t1.b:", t1.b)
WHERE t2.b = t1.b and t2.a = 4;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)
FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ", t1.b:", t1.b)
WHERE t2.b = t1.b and t2.a = 4;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)
--echo # 15 read_key
--echo # 1 read_next, read_rnd
--echo # 2 rean_rnd_next
--echo # 2 update

--echo #
--echo # Test of views
--echo #
FLUSH STATUS;
CREATE VIEW v1_25 AS SELECT a, b FROM t1 PARTITION (p2, p5);
eval $get_handler_status_counts;
--echo # No locks!
FLUSH STATUS;
CREATE VIEW v1_25_check AS SELECT a, b FROM t1 PARTITION (p2, p5) t1_alias WITH CHECK OPTION;
eval $get_handler_status_counts;
--echo # No locks!
FLUSH STATUS;
CREATE VIEW v1_9 AS SELECT a, b FROM t1 WHERE a = 9;
eval $get_handler_status_counts;
--echo # No locks!
FLUSH STATUS;
CREATE VIEW v1_9_check AS SELECT a, b FROM t1 WHERE a = 9 WITH CHECK OPTION;
eval $get_handler_status_counts;
--echo # No locks!
FLUSH STATUS;
CREATE VIEW v1_all AS SELECT a, b FROM t1;
eval $get_handler_status_counts;
--echo # No locks!
SELECT TABLE_NAME, CHECK_OPTION, IS_UPDATABLE, VIEW_DEFINITION
FROM INFORMATION_SCHEMA.VIEWS
WHERE TABLE_SCHEMA = 'test' AND TABLE_NAME LIKE 'v1_%';

FLUSH STATUS;
INSERT INTO v1_all VALUES (23, "Insert in v1_all");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
INSERT INTO v1_25 VALUES (18, "Insert in v1_25");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
--error ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET
INSERT INTO v1_25 VALUES (17, "Insert in v1_25 fail");
eval $get_handler_status_counts;
--echo # 2 locks (1 table, 0 partition lock/unlock)

FLUSH STATUS;
INSERT IGNORE INTO v1_25 VALUES (17, "Insert ignore in v1_25");
eval $get_handler_status_counts;
--echo # 2 locks (1 table, 0 partition lock/unlock)

FLUSH STATUS;
INSERT INTO v1_25_check VALUES (31, "Insert in v1_25_check");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
--error ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET
INSERT INTO v1_25_check VALUES (30, "Insert in v1_25_check fail");
eval $get_handler_status_counts;
--echo # 2 locks (1 table, 0 partition lock/unlock)

FLUSH STATUS;
INSERT IGNORE INTO v1_25_check VALUES (30, "Insert ignore in v1_25_check");
eval $get_handler_status_counts;
--echo # 2 locks (1 table, 0 partition lock/unlock)

FLUSH STATUS;
INSERT INTO v1_9 VALUES (9, "Insert in v1_9");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
INSERT INTO v1_9 VALUES (8, "Insert in v1_9 NO CHECK!");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

SELECT * FROM t1 WHERE a = 8;
--echo # DELETE will not find row not in view
FLUSH STATUS;
DELETE FROM v1_9_check WHERE a = 8;
eval $get_handler_status_counts;
--echo # 0 locks, impossible where!
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM v1_9_check WHERE a = 8;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM v1_9_check WHERE a = 8;
SELECT * FROM t1 WHERE a = 8;

FLUSH STATUS;
--error ER_VIEW_CHECK_FAILED
INSERT INTO v1_9_check VALUES (10, "Insert in v1_9_check fail");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

SELECT * FROM t1 WHERE a = 9;
FLUSH STATUS;
DELETE FROM v1_9_check WHERE a = 9;
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
INSERT INTO v1_9_check VALUES (9, "Insert in v1_9_check");
eval $get_handler_status_counts;

FLUSH STATUS;
--sorted_result
SELECT * FROM v1_9;
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)

FLUSH STATUS;
--sorted_result
SELECT * FROM v1_25;
eval $get_handler_status_counts;
--echo # 6 locks (1 table, 2 partition lock/unlock)

FLUSH STATUS;
--sorted_result
SELECT * FROM v1_all;
eval $get_handler_status_counts;
--echo # 28 locks (1 table, 13 partition lock/unlock)
DROP VIEW v1_all;
DROP VIEW v1_9, v1_9_check;
DROP VIEW v1_25, v1_25_check;

--echo #
--echo # Test CREATE SELECT
--echo #
FLUSH STATUS;
CREATE TABLE t3 SELECT a, b FROM t1 WHERE a IN (0, 1, 13, 113);
eval $get_handler_status_counts;
--echo # 10 locks (2 tables, 3 partitions lock/unlock)
SELECT * FROM t3 ORDER BY a;
DROP TABLE t3;
FLUSH STATUS;
CREATE TABLE t3 SELECT a, b FROM t1 WHERE b LIKE 'First%';
eval $get_handler_status_counts;
--echo # 30 locks (2 tables, 13 partitions lock/unlock)
SELECT * FROM t3 ORDER BY a;
DROP TABLE t3;

--echo #
--echo # Test Stored procedures
--echo #
CREATE PROCEDURE sp_insert(a INT, b CHAR(16))
  INSERT INTO test.t1 VALUES (a, b);

delimiter |;
CREATE PROCEDURE sp_insert_partition(p CHAR(16), a INT, b CHAR(16))
BEGIN
  SET @str = CONCAT("INSERT INTO test.t1 PARTITION(", p, ") VALUES (?, ?)");
  SET @x = a, @y = b;
  PREPARE stmt FROM @str;
  EXECUTE stmt USING @x, @y;
  DEALLOCATE PREPARE stmt;
END|
delimiter ;|

CREATE PROCEDURE sp_select_all()
  SELECT * FROM test.t1;

CREATE PROCEDURE sp_select_exact(x INT)
  SELECT * FROM test.t1 WHERE a = x;

delimiter |;
CREATE PROCEDURE sp_select_partition(p CHAR(16))
BEGIN
  SET @str = CONCAT("SELECT * FROM test.t1 PARTITION(", p, ")");
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  DEALLOCATE PREPARE stmt;
END|
delimiter ;|


CREATE PROCEDURE sp_select_range(x INT, y INT)
  SELECT * FROM test.t1 WHERE a between x and y;

FLUSH STATUS;
CALL sp_insert(313,"Test313");
eval $get_handler_status_counts;
--echo # 6 locks (proc table, t1 + 1 partition lock/unlock)
FLUSH STATUS;
CALL sp_insert_partition("p7", 98, "Test98");
eval $get_handler_status_counts;
--echo # 6 locks (proc table, t1 + 1 partition lock/unlock)
FLUSH STATUS;
--error ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET
CALL sp_insert_partition("p8", 111, "Test111");
eval $get_handler_status_counts;
--echo # no proc locking since already in proc cache.
--echo # 2 locks (1 table, no partitions lock/unlock)
FLUSH STATUS;
CALL sp_insert_partition("p7,p8", 111, "Test111");
eval $get_handler_status_counts;
--echo # 4 locks (1 table, 1 partition lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_all();
eval $get_handler_status_counts;
--echo # 30 locks (procs table, t1 + 13 partitions lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_exact(98);
eval $get_handler_status_counts;
--echo # 6 locks (proc table, t1 + 1 partition lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_partition("p7");
eval $get_handler_status_counts;
--echo # 6 locks (proc table, t1 + 1 partition lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_partition("p8");
eval $get_handler_status_counts;
--echo # no proc locking since already in proc cache.
--echo # 4 locks (t1 + 1 partition lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_partition("p7,p8");
eval $get_handler_status_counts;
--echo # 6 locks (t1 + 2 partitions lock/unlock)
FLUSH STATUS;
--sorted_result
CALL sp_select_range(1,5);
eval $get_handler_status_counts;
--echo # 14 locks (proc table, t1 + 5 partitions lock/unlock)
DROP PROCEDURE sp_insert;
DROP PROCEDURE sp_insert_partition;
DROP PROCEDURE sp_select_all;
DROP PROCEDURE sp_select_partition;
DROP PROCEDURE sp_select_range;
DROP PROCEDURE sp_select_exact;

--echo #
--echo # Test EXPLAIN DELETE
--echo #
SELECT * FROM t1 ORDER BY a;
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE a = 105;
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE b = "No duplicate";
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE a = 105;
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE b = "No duplicate";
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
--echo #
--echo # Test DELETE
--echo #
FLUSH STATUS;
DELETE FROM t1 WHERE a = 105;
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
--echo # 1 read_key
--echo # 1 delete
FLUSH STATUS;
DELETE FROM t1 WHERE b = "No duplicate";
eval $get_handler_status_counts;
--echo # 28 locks (1 table + 13 partition lock/unlock)
--echo # 13 read_key
--echo # 1 read_next (if more matches after the first match)
--echo # 1 delete
FLUSH STATUS;
DELETE FROM t1 WHERE a = (SELECT a + 90 FROM t2 WHERE a = 1);
eval $get_handler_status_counts;
--echo # 32 locks (2 table + 13 + 1 partition lock/unlock)
--echo # 2 read_key
--echo # 2 read_next (if more matches after the first match)
--echo # 1 delete
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE a = (SELECT a + 90 FROM t2 WHERE a = 1);
FLUSH STATUS;
DELETE FROM t1 PARTITION (p0)
WHERE a = (SELECT a + 2 FROM t2 WHERE a = 1);
eval $get_handler_status_counts;
--echo # Impossible delete, all partitions pruned away after locking!
--echo # 8 locks (2 table + 1 PARTITION(p0) + 1 (a = 1) partition lock/unlock)
--echo # 1 read_key
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 PARTITION (p0)
WHERE a = (SELECT a + 2 FROM t2 WHERE a = 1);

--echo #
--echo # Test multi table DELETE
--echo #
SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE t1, t2 FROM t1, t2
WHERE t1.a = t2.a AND t1.b = 'First row, p1';
eval $get_handler_status_counts;
--echo # 56 locks (2 tables + 26 partitions lock/unlock)
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t2, t1 USING t2, t1
WHERE t1.b = t2.b AND t2.a = 4;
eval $get_handler_status_counts;
--echo # 32 locks (2 tables , 13 + 1 partition lock/unlock)

FLUSH STATUS;
DELETE t1, t2 FROM t1, t2
WHERE t1.a = t2.a AND t1.b = 'First row, p1';
eval $get_handler_status_counts;
--echo # 56 locks (2 tables + 26 partitions lock/unlock)
--echo # 15 read_key
--echo # 1 read_next, read_rnd
--echo # 2 delete
FLUSH STATUS;
DELETE FROM t2, t1 USING t2, t1
WHERE t1.b = t2.b AND t2.a = 4;
eval $get_handler_status_counts;
--echo # 32 locks (2 tables , 13 + 1 partition lock/unlock)
--echo # 15 read_key
--echo # 1 read_next, read_rnd
--echo # 2 delete

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;

--echo #
--echo # Test subquery IN expression
--echo #
FLUSH STATUS;
EXPLAIN PARTITIONS SELECT count(*) FROM t1 p
WHERE a IN (1, 2, 9);
eval $get_handler_status_counts;
--echo # 8 locks (1 table, 3 partitions, lock/unlock)

FLUSH STATUS;
EXPLAIN PARTITIONS SELECT count(*) FROM t1 p
WHERE a IN
(SELECT a + 1 FROM t2 WHERE a = 4);
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions, lock/unlock)

--echo #
--echo # Test triggers
--echo # Tables used in triggers cannot be pruned for locks.
--echo # Tables with triggers cannot be pruned for locks if
--echo # BEFORE INSERT/UPDATE trigger uses any partitioning columns.
--echo #
CREATE TABLE t3
(old_a int,
 new_a int,
 old_b varchar(255),
 new_b varchar(255),
 key (new_a, new_b),
 key(new_b))
PARTITION BY HASH (new_a) PARTITIONS 5;

CREATE TRIGGER t1_after_insert AFTER INSERT
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (2, NEW.a, NULL, CONCAT("AI: ", NEW.b));

CREATE TRIGGER t1_after_update AFTER UPDATE
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (OLD.a, NEW.a, CONCAT("AU: ", OLD.b), CONCAT("AU: ", NEW.b));

FLUSH STATUS;
INSERT INTO t1 VALUES (2, "First row, p2")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", duplicate key 2");
eval $get_handler_status_counts;
--echo # 28 locks (3 tables, 1 + 5 + 5 partition lock/unlock)
--echo # (t1 to insert, t3 after insert trigger, t3 after update trigger)
SELECT * FROM t1 WHERE a = 2;

FLUSH STATUS;
REPLACE INTO t1 VALUES (0, "First row, p0 REPLACED");
eval $get_handler_status_counts;
--echo # 16 locks (2 tables, 1 + 5 partition lock/unlock)
--echo # (t1 to replace, t3 after insert trigger)
--echo # Note that since there is no delete trigger, REPLACE cheats by
--echo # doing update instead of delete+insert!
SELECT * FROM t1 WHERE a = 0;

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1 SET b = CONCAT(b, ", UPDATED2") WHERE a = 3;
eval $get_handler_status_counts;
--echo # 16 locks (2 tables, 1 + 5 partition lock/unlock)
--echo # (t1 to insert, t3 after update trigger)

CREATE TRIGGER t1_after_delete AFTER DELETE
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (OLD.a, NULL, CONCAT("AD: ", OLD.b), NULL);

FLUSH STATUS;
REPLACE INTO t1 VALUES (0, "First row, p0 REPLACED2");
eval $get_handler_status_counts;
--echo # 28 locks (3 tables, 1 + 5 + 5 partition lock/unlock)
--echo # (t1 to replace, t3 after insert trigger, t3 after delete trigger)
--echo # Note that now it does delete+insert instead, due to delete trigger!
SELECT * FROM t1 WHERE a = 0;

CREATE TRIGGER t1_before_delete BEFORE DELETE
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (OLD.a, NULL, CONCAT("BD: ", OLD.b), NULL);

FLUSH STATUS;
REPLACE INTO t1 VALUES (0, "First row, p0 REPLACED3");
eval $get_handler_status_counts;
--echo # 40 locks (4 tables, 1 + 5 + 5 + 5 partition lock/unlock)
--echo # (t1 to replace, t3 after insert trigger, t3 before delete trigger,
--echo #  t3 after delete trigger)
SELECT * FROM t1 WHERE a = 0;

CREATE TRIGGER t1_before_update BEFORE UPDATE
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (OLD.a, NEW.a, CONCAT("BU: ", OLD.b), CONCAT("BU: ", NEW.b));

FLUSH STATUS;
INSERT INTO t1 VALUES (2, "First row, p2")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", duplicate key 2");
eval $get_handler_status_counts;
--echo # No pruning possible, due to BEFORE UPDATE trigger
--echo # 64 locks (4 tables, 13 + 5 + 5 + 5 partitions lock/unlock)
--echo # t1, t3 after insert, t3 before update, t3 after update
SELECT * FROM t1 WHERE a = 2;

FLUSH STATUS;
REPLACE INTO t1 VALUES (0, "First row, p0 REPLACED4");
eval $get_handler_status_counts;
--echo # 40 locks (4 tables, 1 + 5 + 5 + 5 partition lock/unlock)
--echo # t1, t3 after insert, t3 before delete, t3 after delete
SELECT * FROM t1 WHERE a = 0;

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1 SET b = CONCAT(b, ", UPDATED2") WHERE a = 3;
eval $get_handler_status_counts;
--echo # No pruning possible, due to BEFORE UPDATE trigger
--echo # 52 locks (3 tables, 13 + 5 + 5 partition lock/unlock)
--echo # t1, before update, after update
SELECT * FROM t1 WHERE a = 3;

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", UPDATED2") WHERE a = 3;
eval $get_handler_status_counts;
--echo # 52 locks (3 tables, 13 + 5 + 5 partition lock/unlock)
--echo # t1, before update, after update
SELECT * FROM t1 WHERE a = 3;

EXPLAIN PARTITIONS INSERT INTO t1 VALUES (12, "First row, p12");

FLUSH STATUS;
INSERT INTO t1 VALUES (12, "First row, p12");
eval $get_handler_status_counts;
--echo # 16 locks (2 table, 1 + 5 partition lock/unlock)
--echo # t1, t3 after insert trigger

CREATE TRIGGER t1_before_insert BEFORE INSERT
ON t1 FOR EACH ROW
INSERT INTO t3 VALUES (1, NEW.a, NULL, CONCAT("BI: ", NEW.b));

FLUSH STATUS;
INSERT INTO t1 VALUES (11, "First row, p11");
eval $get_handler_status_counts;
--echo # Nothing can be pruned, due to triggers.
--echo # 52 locks (3 tables, 13 + 5 + 5 partition lock/unlock)
--echo # t1, t3 before insert, t3 after insert.

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS DELETE FROM t1 WHERE a = 98;
eval $get_handler_status_counts;
--echo # 28 locks (3 tables, 1 + 5 + 5 partitions)
--echo # t1, t3 before delete trigger, t3 after delete trigger
--echo # part 7, part 0-4, part 0-4.
SELECT * FROM t1 ORDER BY a;
FLUSH STATUS;
DELETE FROM t1 WHERE a = 98;
eval $get_handler_status_counts;
--echo # 28 locks (3 tables, 1 + 5 + 5 partitions)
--echo # t1, t3 before delete trigger, t3 after delete trigger

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;
--sorted_result
SELECT * FROM t3 ORDER BY new_a;
TRUNCATE TABLE t1;

DROP TRIGGER t1_before_insert;
DROP TRIGGER t1_before_update;
DROP TRIGGER t1_before_delete;
DROP TRIGGER t1_after_insert;
DROP TRIGGER t1_after_update;
DROP TRIGGER t1_after_delete;

--echo #
--echo # Test BEFORE INSERT TRIGGER depending on partitioning column
--echo #
CREATE TRIGGER t1_before_insert BEFORE INSERT
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("b: ", NEW.b, " a: ", NEW.a);

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "first row, p0");
eval $get_handler_status_counts;
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "Second row, p0")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", duplicate key");
eval $get_handler_status_counts;
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", Updated") WHERE a = 0;
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET a = 1, b = CONCAT(b, ", a was 0") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Updating partitioning column, no lock pruning
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

--echo #
--echo # Test BEFORE INSERT TRIGGER not depending on partitioning column
--echo #
DROP TRIGGER t1_before_insert;

CREATE TRIGGER t1_before_insert BEFORE INSERT
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("b: ", NEW.b);

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "first row, p0");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "Second row, p0")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", duplicate key");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", Updated") WHERE a = 0;
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET a = 2, b = CONCAT(b, ", a was 0") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Updating partitioning column, no lock pruning
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

--echo #
--echo # Test BEFORE UPDATE TRIGGER OLD depending on partitioning column.
--echo # Note that it does not update any partitioning column.
--echo #
CREATE TRIGGER t1_before_update BEFORE UPDATE
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("old a: ", OLD.a, " new b: ", NEW.b);

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "1st p0");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "2nd p0")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", dup key");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", Updated") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Lock pruning possible!
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET a = 3, b = CONCAT(b, ", a was 0") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Updating partitioning column, no lock pruning
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

--echo #
--echo # Test BEFORE UPDATE TRIGGER NEW depending on partitioning column.
--echo # Note that it does not update any partitioning column.
--echo #
DROP TRIGGER t1_before_update;

CREATE TRIGGER t1_before_update BEFORE UPDATE
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("new a: ", NEW.a, " new b: ", NEW.b);

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "1st p0");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "2nd p0")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", dup key");
eval $get_handler_status_counts;
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", Updated") WHERE a = 0;
eval $get_handler_status_counts;
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET a = 4, b = CONCAT(b, ", a was 0") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Updating partitioning column, no lock pruning
--echo # 28 locks (1 tables, 13 partitions lock/unlock)


--echo #
--echo # Test BEFORE UPDATE TRIGGER not depending on partitioning column
--echo #
DROP TRIGGER t1_before_update;

CREATE TRIGGER t1_before_update BEFORE UPDATE
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("new b: ", NEW.b);

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "1st p0");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
INSERT INTO t1 VALUES (0, "2nd p0")
ON DUPLICATE KEY UPDATE b = CONCAT(b, ", dup key");
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET b = CONCAT(b, ", Updated") WHERE a = 0;
eval $get_handler_status_counts;
--echo # 4 locks (1 tables, 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1 SET a = 5, b = CONCAT(b, ", a was 0") WHERE a = 0;
eval $get_handler_status_counts;
--echo # Updating partitioning column, no lock pruning
--echo # 28 locks (1 tables, 13 partitions lock/unlock)

SELECT * FROM t1 ORDER BY a;

DROP TABLE t1, t2, t3;

--echo #
--echo # Test of BEFORE UPDATE triggers and multi UPDATE
--echo #
CREATE TABLE t1 (a int, b varchar(128), KEY (b))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 13;

CREATE TABLE t2 (a int PRIMARY KEY, b varchar(128))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 13;

INSERT INTO t1 VALUES (1, "MultiUpdate1");
INSERT INTO t1 VALUES (2, "MultiUpdate2");
INSERT INTO t2 VALUES (1, "MultiUpdate1");
INSERT INTO t2 VALUES (2, "MultiUpdate2");

CREATE TRIGGER t1_before_update BEFORE UPDATE
ON t1 FOR EACH ROW
SET NEW.b = CONCAT("new1 b: ", NEW.b);

CREATE TRIGGER t2_before_update BEFORE UPDATE
ON t2 FOR EACH ROW
SET NEW.b = CONCAT("new2 a: ", NEW.a, " new2 b: ", NEW.b);

FLUSH STATUS;
--replace_column 9 #
EXPLAIN EXTENDED UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(1) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(1) t1.b:", t1.b)
WHERE t2.b = t1.b and t1.a = 1;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(1) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(1) t1.b:", t1.b)
WHERE t2.b = t1.b and t1.a = 1;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(1) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(1) t1.b:", t1.b)
WHERE t2.b = t1.b and t1.a = 1;
eval $get_handler_status_counts;
--echo # 32 locks (2 table, 13 + 1 partitions lock/unlock)
--echo # 14 read_first
--echo # 16 read_key
--echo # 2 read_rnd
--echo # 21 rean_rnd_next
--echo # 2 update

FLUSH STATUS;
--replace_column 9 #
EXPLAIN EXTENDED UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(2) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(2) t1.b:", t1.b)
WHERE t1.b = t2.b and t2.a = 2;
eval $get_handler_status_counts;
--echo # Trigger touches partitioning column, unable to prune locks
--echo # 56 locks (2 tables + 2 * 13 partitions lock/unlock)

FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(2) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(2) t1.b:", t1.b)
WHERE t1.b = t2.b and t2.a = 2;
eval $get_handler_status_counts;
--echo # Trigger touches partitioning column, unable to prune locks
--echo # 56 locks (2 tables + 2 * 13 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ",(2) t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ",(2) t1.b:", t1.b)
WHERE t1.b = t2.b and t2.a = 2;
eval $get_handler_status_counts;
--echo # Due to the BEFORE UPDATE trigger on t2 that looks at 'a',
--echo # no locks can be pruned.
--echo # 56 locks (2 table, 2 * 13 partitions lock/unlock)
--echo # 15 read_key
--echo # 1 read_next, read_rnd
--echo # 2 read_rnd_next
--echo # 2 update

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;
DROP TABLE t1, t2;

--echo #
--echo # Test constant propagation in WHERE clause
--echo # (Currently no propagation is done before locking).
CREATE TABLE t1 (a int, b varchar(128), KEY (b))
ENGINE = InnoDB
PARTITION BY RANGE (a)
(PARTITION pNeg VALUES LESS THAN (0),
 PARTITION p0 VALUES LESS THAN (1),
 PARTITION p1 VALUES LESS THAN (2),
 PARTITION p2 VALUES LESS THAN (3),
 PARTITION p3 VALUES LESS THAN (4),
 PARTITION pMax VALUES LESS THAN MAXVALUE);

CREATE TABLE t2 (a int PRIMARY KEY, b varchar(128))
ENGINE = InnoDB
PARTITION BY RANGE (a)
(PARTITION pNeg VALUES LESS THAN (0),
 PARTITION p0 VALUES LESS THAN (1),
 PARTITION p1 VALUES LESS THAN (2),
 PARTITION p2 VALUES LESS THAN (3),
 PARTITION p3 VALUES LESS THAN (4),
 PARTITION pMax VALUES LESS THAN MAXVALUE);


INSERT INTO t1 VALUES (1, "Const1");
INSERT INTO t2 VALUES (1, "Const1");
INSERT INTO t1 VALUES (2, "Const2");
INSERT INTO t2 VALUES (2, "Const2");
INSERT INTO t1 VALUES (3, "Const3");
INSERT INTO t2 VALUES (3, "Const3");

--echo # Test simple '=' propagation
FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t2.a = 1;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 6 + 1 partitions lock/unlock)
#--echo # 8 locks (2 tables + 2 partitions lock/unlock)

FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t1.a = 1;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 1 + 6 partitions lock/unlock)
#--echo # 8 locks (2 tables + 2 partitions lock/unlock)

--echo # Test OR propagation
FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND (t2.a = 1 OR t2.a = 2);
eval $get_handler_status_counts;
--echo # 20 locks (2 tables, 6 + 2 partitions lock/unlock)
--echo # But it will be scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1, t2
WHERE t1.a = t2.a AND (t1.a = 1 OR t1.a = 2);

--echo # Test closed range propagation
FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t1.a >= 1 AND t1.a <=3;
eval $get_handler_status_counts;
--echo # 22 locks (2 tables, 6 + 3 partitions lock/unlock)

--echo # But it will be scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t1.a >= 1 AND t1.a <=3;

--echo # Test open range propagation
FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t2.a >= 1;
eval $get_handler_status_counts;
--echo # 24 locks (2 tables, 6 + 4 partitions lock/unlock)
--echo # But is scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t2.a >= 1;

FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t2.a <= 1;
eval $get_handler_status_counts;
--echo # 22 locks (2 tables, 6 + 3 partitions lock/unlock)
--echo # But is scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t2.a <= 1;

--echo # Test IN propagation
FLUSH STATUS;
SELECT * FROM t1, t2
WHERE t1.a = t2.a and t2.a IN (1, 3);
eval $get_handler_status_counts;
--echo # 20 locks (2 tables, 6 + 2 partitions lock/unlock)
--echo # But is scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1, t2
WHERE t1.a = t2.a AND t1.a IN (1, 3);

--echo # Same for UPDATE
FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b)
WHERE t1.a = t2.a and t2.a IN (2, 3);
eval $get_handler_status_counts;
--echo # 20 locks (2 tables, 6 + 2 partitions lock/unlock)
--echo # But is scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b)
WHERE t1.a = t2.a and t2.a IN (2, 3);

FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ", t1.b:", t1.b)
WHERE t1.a = t2.a and t2.a = 1;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 6 + 1 partitions lock/unlock)
#--echo # 8 locks (2 tables, 2 partitions lock/unlock)

FLUSH STATUS;
UPDATE t1, t2
SET t1.b = CONCAT(t1.b, ", t2.b:", t2.b),
    t2.b = CONCAT(t2.b, ", t1.b:", t1.b)
WHERE t1.a = t2.a and t1.a = 2;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 1 + 6 partitions lock/unlock)
#--echo # 8 locks (2 tables, 2 partitions lock/unlock)

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;

--echo # Same for DELETE
FLUSH STATUS;
DELETE t1 FROM t1, t2
WHERE t1.a = t2.a AND t2.a IN (1, 9);
eval $get_handler_status_counts;
--echo # 20 locks (2 tables, 6 + 2 partitions lock/unlock)
--echo # But is scanned pruned!
--replace_column 10 #
EXPLAIN PARTITIONS DELETE t1 FROM t1, t2
WHERE t1.a = t2.a AND t2.a IN (1, 9);

SELECT * FROM t1 ORDER BY a;

FLUSH STATUS;
DELETE t1 FROM t1, t2
WHERE t1.a = t2.a and t2.a = 2;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 6 + 1 partitions lock/unlock)
#--echo # 8 locks (2 tables, 2 partitions lock/unlock)
FLUSH STATUS;
DELETE t1 FROM t1, t2
WHERE t1.a = t2.a and t1.a = 1;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 1 + 6 partitions lock/unlock)
#--echo # 8 locks (2 tables, 2 partitions lock/unlock)

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;

FLUSH STATUS;
DELETE t1, t2 FROM t1, t2
WHERE t1.a = t2.a and t2.a = 3;
eval $get_handler_status_counts;
--echo # 18 locks (2 tables, 6 + 1 partitions lock/unlock)
#--echo # 8 locks (2 tables, 2 partitions lock/unlock)

SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;
DROP TABLE t1, t2;

--echo #
--echo # DO is not supported by WL#4443 !!!
--echo # Test of DO (eg. SELECT without returning values)
--echo #
CREATE TABLE t1 (a INT, b VARCHAR(66))
PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "One"), (2, "Two"), (3, "Three"), (4, "Four"), (5, "Five"), (6, "Six"), (0, "Zero");
DO (SELECT a FROM t1);
FLUSH STATUS;
DO (SELECT @x:= b FROM t1 WHERE a = 5);
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT @x;
FLUSH STATUS;
DO (SELECT @x:= b FROM t1 WHERE a = 5 or a = 1 ORDER BY b LIMIT 1);
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT @x;

--echo #
--echo # SET is not supported by WL#4443 !!!
--echo # Test of SET (eg. SELECT only setting an internal variable from
--echo # the returning value)
--echo #
FLUSH STATUS;
SET @x = (SELECT a FROM t1 WHERE a = 5);
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT @x;
FLUSH STATUS;
SET @y = (SELECT @x:= b FROM t1 WHERE a = 5);
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT @x, @y;
FLUSH STATUS;
SET @y = (SELECT @x:= b FROM t1 WHERE a = 5 or a = 1 ORDER BY b LIMIT 1);
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT @x, @y;

--echo #
--echo # LOAD DATA is not supported by WL#4443 !!!
--echo #
FLUSH STATUS;
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
eval SELECT * FROM t1 WHERE a IN (1, 4)
INTO OUTFILE '$MYSQLTEST_VARDIR/tmp/t1.part1';
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partitions lock/unlock)
DELETE FROM t1 WHERE a IN (1, 4);
SELECT * FROM t1 ORDER BY a, b;
FLUSH STATUS;
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
eval LOAD DATA INFILE '$MYSQLTEST_VARDIR/tmp/t1.part1' INTO TABLE t1;
eval $get_handler_status_counts;
--echo # 8 locks (1 table + 3 partitions lock/unlock)
SELECT * FROM t1 ORDER BY a, b;
DELETE FROM t1 WHERE a IN (1, 4);
SELECT * FROM t1 ORDER BY a, b;
--echo # It is possible to avoid locking with explicit partitioning selection!
FLUSH STATUS;
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
eval LOAD DATA INFILE '$MYSQLTEST_VARDIR/tmp/t1.part1' INTO TABLE t1 PARTITION(p1);
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partitions lock/unlock)
SELECT * FROM t1 ORDER BY a, b;
--remove_file $MYSQLTEST_VARDIR/tmp/t1.part1

DROP TABLE t1;

--echo #
--echo # Test EXCHANGE PARTITION to only lock exchanged partition
--echo #
CREATE TABLE t1 (a INT, b VARCHAR(44));
CREATE TABLE t2 (a INT, b VARCHAR(44))
PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (10, "Ten"), (13, "Thirteen"), (16, "Sixteen");
INSERT INTO t2 VALUES (0, "Zero"), (1, "One"), (2, "Two"),
                      (3, "Three"), (4, "Four"), (5, "Five"),
                      (6, "Six"), (7, "Seven"), (8, "Eight");
FLUSH STATUS;
ALTER TABLE t2 EXCHANGE PARTITION p1 WITH TABLE t1;
eval $get_handler_status_counts;
--echo # 6 locks (2 table + 1 partition lock/unlock)
SELECT * FROM t1 ORDER BY a;
SELECT * FROM t2 ORDER BY a;
DROP TABLE t1, t2;

--echo #
--echo # Prepared statement
--echo #
CREATE TABLE t1 (N int, M tinyint)
PARTITION BY HASH (N) PARTITIONS 3; 
INSERT INTO t1 VALUES (1,0),(1,0),(2,0),(2,0),(3,0);
PREPARE stmt FROM 'UPDATE t1 AS P1 INNER JOIN (SELECT N FROM t1 GROUP BY N HAVING COUNT(M) > 1) AS P2 ON P1.N = P2.N SET P1.M = 2';
FLUSH STATUS;
EXECUTE stmt;
eval $get_handler_status_counts;
--echo # 16 locks (2 table + 6 partition lock/unlock)
SELECT * FROM t1 ORDER BY N, M;
DEALLOCATE PREPARE stmt;
PREPARE stmt FROM 'SELECT * FROM t1 WHERE N = 2';
FLUSH STATUS;
EXECUTE stmt;
eval $get_handler_status_counts;
--echo # 4 locks (1 table + 1 partition lock/unlock)
DROP TABLE t1;

--echo # Check if we can infer from condition on partition fields that 
--echo # no records will match.
CREATE TABLE t1 ( a int NOT NULL) PARTITION BY HASH(a) PARTITIONS 2;
INSERT INTO t1 VALUES (1),(2),(3);
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS SELECT * FROM t1 WHERE a=5 AND a=6;
eval $get_handler_status_counts;
--echo # 2 locks (1 table + 0 partition lock/unlock)
FLUSH STATUS;
SELECT * FROM t1 WHERE a=5 AND a=6;
eval $get_handler_status_counts;
--echo # 2 locks (1 table + 0 partition lock/unlock)
DROP TABLE t1;

--echo #
--echo # Test of subqueries in INSERT
--echo #
CREATE TABLE t1 (a INT, b VARCHAR(64));
CREATE TABLE t2 (a INT, b VARCHAR(64)) PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, "test 1");
--error ER_PARSE_ERROR
INSERT INTO t2 VALUES (SELECT * FROM t1);
FLUSH STATUS;
INSERT INTO t2 VALUES ((SELECT a FROM t1), (SELECT b FROM t1));
eval $get_handler_status_counts;
--echo # 12 locks (3 tables + 3 partitions) x lock/unlock
--echo # I.e. No lock pruning possible
FLUSH STATUS;
INSERT INTO t2 VALUES (1 + (SELECT a FROM t1),
                       CONCAT("subq: ", (SELECT b FROM t1)));
eval $get_handler_status_counts;
--echo # 12 locks (3 tables + 3 partitions) x lock/unlock
--echo # I.e. No lock pruning possible
--sorted_result
SELECT * FROM t2;
DROP TABLE t1, t2;
CREATE TABLE t1 (a INT, b INT) PARTITION BY HASH (a) PARTITIONS 3;
CREATE TABLE t2 (a INT, b INT) PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1, 1), (2, 0), (4, -1), (5, 2), (7, -3), (8, -9),
                      (10, 5), (11, 9);
FLUSH STATUS;
INSERT INTO t2 VALUES ((SELECT max(a) FROM t1), (SELECT min(a) FROM t1));
eval $get_handler_status_counts;
--echo # 24 locks (3 tables + 3 x 3 partitions) x lock/unlock
--echo # I.e. No lock pruning possible
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS INSERT INTO t2 VALUES ((SELECT max(a) FROM t1),
                                          (SELECT min(a) FROM t1));
eval $get_handler_status_counts;
--echo # 24 locks (3 tables + 3 x 3 partitions) x lock/unlock
--echo # I.e. No lock pruning possible
FLUSH STATUS;
INSERT INTO t2 VALUES ((SELECT a FROM t1 WHERE a = 1),
                       (SELECT b FROM t1 WHERE a = 2));
eval $get_handler_status_counts;
--echo # 16 locks (3 tables + 3 + 1 + 1 partitions) x lock/unlock
--echo # I.e. No lock pruning possible on insert table
FLUSH STATUS;
--replace_column 10 #
EXPLAIN PARTITIONS INSERT INTO t2 VALUES ((SELECT a FROM t1 WHERE a = 1),
                                          (SELECT b FROM t1 WHERE a = 2));
eval $get_handler_status_counts;
--echo # 16 locks (3 tables + 3 + 1 + 1 partitions) x lock/unlock
--echo # I.e. No lock pruning possible on insert table
SELECT * FROM t2 ORDER BY a, b;
DROP TABLE t1;
DROP TABLE t2;

--echo #
--echo # Test of InnoDB INSERT TABLE with non existing table in trigger
--echo #
CREATE TABLE t1 (a INT)
ENGINE = InnoDB;

--echo # Create a table to be used in a trigger on t1
CREATE TABLE t2 (a INT)
ENGINE = InnoDB;
--echo # Create a trigger on t1 which uses t2
delimiter //;
CREATE TRIGGER tr1_1_N  BEFORE INSERT ON t1
FOR EACH ROW BEGIN
  UPDATE t2 SET a = 8 WHERE a > 3 LIMIT 0;
END//
delimiter ;//

--echo # Drop t2 to cause a failure when inserting into t1
DROP TABLE t2;
--error ER_NO_SUCH_TABLE
INSERT INTO t1 VALUES (1);
DROP TABLE t1;

CREATE TABLE t1 (a INT) PARTITION BY HASH (a) PARTITIONS 3;
INSERT INTO t1 VALUES (1), (3), (9), (2), (8), (7);

FLUSH STATUS;
CREATE TABLE t2 SELECT * FROM t1 PARTITION (p1, p2);
eval $get_handler_status_counts;
--echo # 8 locks (2 tables, 2 partitions, lock/unlock)
--sorted_result
SELECT * FROM t2;
DROP TABLE t2;

FLUSH STATUS;
CREATE TABLE t2 SELECT * FROM t1 WHERE a IN (1, 3, 9);
eval $get_handler_status_counts;
--echo # 8 locks (2 tables, 2 partitions, lock/unlock)
--sorted_result
SELECT * FROM t2;

DROP TABLE t1, t2;

--echo #
--echo # Test subqueries/stored functions with UPDATE/DELETE/SELECT
--echo #
CREATE TABLE tq (id int PRIMARY KEY auto_increment, query varchar(255), not_select tinyint);
CREATE TABLE tsq (id int PRIMARY KEY auto_increment, subquery varchar(255), can_be_locked tinyint);
CREATE TABLE t1 (a int, b varchar(255), PRIMARY KEY (a), KEY (b))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 3;
CREATE TABLE t2 (a int, b varchar(255), PRIMARY KEY (a), KEY (b))
ENGINE = InnoDB
PARTITION BY HASH (a) PARTITIONS 3;
START TRANSACTION;
INSERT INTO t1 VALUES (1, "1");
INSERT INTO t1 VALUES (2, "2");
INSERT INTO t1 VALUES (8, "8");
INSERT INTO t2 VALUES (1, "1");
INSERT INTO t2 VALUES (2, "2");
INSERT INTO t2 VALUES (8, "8");

CREATE FUNCTION sf_add_hello(s VARCHAR(240))
  RETURNS VARCHAR(246) DETERMINISTIC
  RETURN CONCAT('hello ', s);
CREATE FUNCTION sf_add_1(i INT)
  RETURNS INT DETERMINISTIC
  RETURN i + 1;
delimiter |;
CREATE FUNCTION sf_a_from_t1b_d(s varchar(128))
  RETURNS INT DETERMINISTIC
  BEGIN
  DECLARE i INT;
    SELECT a INTO i FROM t1 where b = s;
    RETURN i;
  END|
CREATE FUNCTION sf_a_from_t1b(s varchar(128))
  RETURNS INT
  BEGIN
  DECLARE i INT;
    SELECT a INTO i FROM t1 where b = s;
    RETURN i;
  END|
delimiter ;|

INSERT INTO tq (query, not_select) VALUES
  ("SELECT * FROM t2", 0),
  ("SELECT sf_add_1(a) - 1, sf_add_hello(b) FROM t2", 0),
  ("UPDATE t2 SET b = CONCAT('+', b)", 1),
  ("UPDATE t2 SET b = sf_add_hello(b)", 1),
  ("UPDATE t2 SET a = sf_add_1(a) + 4", 1),
  ("DELETE FROM t2", 1);
INSERT INTO tsq (subquery, can_be_locked) VALUES
  ("(SELECT a FROM t1 WHERE b = '1')", 1),
  ("7 + (SELECT a FROM t1 WHERE b = '1')", 1),
  ("sf_a_from_t1b('1')", 1),
  ("sf_a_from_t1b_d('1')", 1),
  ("7 + sf_a_from_t1b('1')", 1),
  ("7 + sf_a_from_t1b_d('1')", 1),
  ("sf_a_from_t1b('1') AND a = 2", 1),
  ("sf_a_from_t1b_d('1') AND a = 2", 1),
  ("(SELECT a FROM t1 WHERE b = '1') AND a = 2", 1),
  ("(SELECT a FROM t1 WHERE b = '1') OR a = 2", 1),
  ("(SELECT a FROM t1 WHERE b = '1') AND a = 2 OR a = 8 AND sf_a_from_t1b('2')", 0);

set @old_autocommit= @@autocommit;
let $subnr= 1;
let $qnr= 1;

let $query = `SELECT query FROM tq WHERE id = $qnr`;
let $not_select = `SELECT not_select FROM tq WHERE id = $qnr`;
let $subq = `SELECT subquery FROM tsq WHERE id = $subnr`;
let $can_be_locked = `SELECT can_be_locked FROM tsq WHERE id = $subnr`;
while ($query != '')
{
  while ($subq != '')
  {
    --replace_column 10 #
    eval EXPLAIN PARTITIONS $query WHERE a = $subq;
    FLUSH STATUS;
    START TRANSACTION;
    eval $query WHERE a = $subq;
    eval $get_handler_status_counts;
    if ($not_select)
    {
      --sorted_result
      SELECT * FROM t2;
      ROLLBACK;
    }
    if ($can_be_locked)
    {
      FLUSH STATUS;
      # Cannot use START TRANSACTION with LOCK TABLES
      SET autocommit = 0;
      LOCK TABLES t1 read, t2 write;
      eval $query WHERE a = $subq;
      eval $get_handler_status_counts;
      if ($not_select)
      {
        --sorted_result
        SELECT * FROM t2;
        ROLLBACK;
      }
      UNLOCK TABLES;
    }
    inc $subnr;
    let $subq = `SELECT subquery FROM tsq WHERE id = $subnr`;
    let $can_be_locked = `SELECT can_be_locked FROM tsq WHERE id = $subnr`;
  }
  let $subnr= 1;
  let $subq = `SELECT subquery FROM tsq WHERE id = $subnr`;
  let $can_be_locked = `SELECT can_be_locked FROM tsq WHERE id = $subnr`;
  inc $qnr;
  let $query = `SELECT query FROM tq WHERE id = $qnr`;
  let $not_select = `SELECT not_select FROM tq WHERE id = $qnr`;
}

set @@autocommit= @old_autocommit;
DROP FUNCTION sf_add_hello;
DROP FUNCTION sf_add_1;
DROP FUNCTION sf_a_from_t1b_d;
DROP FUNCTION sf_a_from_t1b;

DROP TABLE tq, tsq, t1, t2;

SET @@global.innodb_stats_persistent= @old_innodb_stats_persistent;